Export limit exceeded: 30000 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28755 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76672 | 3 Arubanetworks, Hewlett Packard Enterprise (hpe), Hpe | 3 Edgeconnect Sd-wan Orchestrator, Edgeconnect Sd-wan Gateways, Edgeconnect Operating System | 2026-09-25 | 9.9 Critical |
| A vulnerability exists in the SD-WAN Orchestrator that may lead to the exposure of sensitive configuration information. An authenticated remote attacker with read-only privileges could exploit this vulnerability by sending a specially crafted request to the cache synchronization endpoint. Successful exploitation could result in the disclosure of sensitive third-party API tokens and credentials, potentially enabling lateral movement to external security platforms. | ||||
| CVE-2026-93219 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/timer-sun4i: Advertise a real minimum delta sun4i_clkevt_next_event() compensates for the timer stop/start synchronization delay by programming evt - TIMER_SYNC_TICKS into the hardware interval register. The clockevent device currently advertises TIMER_SYNC_TICKS as min_delta_ticks, so the clockevents core is allowed to call set_next_event() with evt == TIMER_SYNC_TICKS. That programs a zero-tick interval. With oneshot/highres/nohz timer operation this can leave the next event stuck, which was observed as a boot hang on Allwinner D1 after the clockevents core started reusing forced minimum-delta events. Advertise one extra tick instead, so the smallest event accepted by the core still programs at least one hardware tick after the synchronization compensation. | ||||
| CVE-2026-93240 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memcg: make the v1 soft limit knob inert The v1 soft limit has been deprecated since v6.12 and nobody has reported depending on it. Start the removal by decoupling the interface from the implementation: keep memory.soft_limit_in_bytes, but ignore writes to it and always report the maximum value on read similar to what memory.kmem.limit_in_bytes already does. Writes are still parsed, so malformed input keeps returning -EINVAL. The knob now also behaves the same everywhere: it used to return -EOPNOTSUPP on PREEMPT_RT, where soft limit reclaim has always been disabled. This also fixes the syzbot report linked below. Soft limit reclaim is the only caller that runs shrink_lruvec() from kswapd against a specific memcg, so it is the only way to reach lru_gen_shrink_lruvec() and in turn set_mm_walk(), which warns when called from kswapd. | ||||
| CVE-2026-77797 | 1 Rapid7 | 1 Velociraptor | 2026-09-25 | 3.6 Low |
| Velociraptor's prefetch library contains an out of bound vulnerability which may cause a crash when parsing certain malformed prefetch files. | ||||
| CVE-2026-6973 | 1 Ivanti | 1 Endpoint Manager Mobile | 2026-09-25 | 7.2 High |
| An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution. | ||||
| CVE-2026-61749 | 1 Inventree | 1 Inventree | 2026-09-24 | 6.5 Medium |
| InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, privileged staff users who can author report or label templates can cause WeasyPrint report rendering to retrieve attacker-selected resources through the HTTP and HTTPS URL schemes or the local file URI scheme. The HTML(string=html).write_pdf() path does not provide a restricted url_fetcher, and attach_to_model=True stores the original generated PDF before later processing, allowing fetched local files or internal HTTP response bodies to be recovered from embedded attachments. This enables full-read server-side request forgery, arbitrary local file disclosure including application credentials, and possible compromise of a superuser account. This issue is fixed in version 1.4.0. | ||||
| CVE-2026-79304 | 1 Usmannasir | 1 Cyberpanel | 2026-09-24 | 6.5 Medium |
| CyberPanel 1.9.1 contains a path traversal vulnerability in the readFileContents method of the /filemanager/controller endpoint. An authenticated remote attacker with ownership of any configured domain can supply an arbitrary absolute or out-of-scope path in the fileName JSON property. Because authorization validates only domainName and does not canonicalize or restrict fileName to that domain's home directory, the application returns the contents of files readable by the CyberPanel execution identity. | ||||
| CVE-2026-54649 | 1 Punchin-app | 1 Punchin-email | 2026-09-24 | N/A |
| punchin-email is a Cloudflare Email Worker that provides two-way role aliases while relaying mail to a private inbox. Prior to 1.5.0, handleInbound delivers inbound alias mail with message.forward(), which silently drops the added Reply-To header intended to route responses through the relay. When a correspondent sends mail to an alias and the operator replies, the mail client can send directly to the correspondent from the private FORWARD_TO inbox address, exposing that address. The disclosure is limited to the operator's own email address and does not expose third-party data or provide code execution or authentication bypass. This issue is fixed in version 1.5.0. | ||||
| CVE-2026-54577 | 1 Midnightbsd | 1 Mport | 2026-09-24 | N/A |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, the audit command in mport/mport.c computed option-adjusted local_argv and local_argc values but passed the original argument entry to audit_package(). When an operator or automation used an option such as -r before a package name, stale optind state and the unadjusted argument could cause mport to audit the option token instead of the requested package, producing a false-negative or useless result that could leave a vulnerable package unidentified. The corrected parsing resets optind and optreset before using the adjusted local arguments. This issue is fixed in version 2.7.8. | ||||
| CVE-2026-85719 | 1 Asynchttpclient Project | 1 Async-http-client | 2026-09-24 | 7.5 High |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.1.0 until 2.16.1 and 3.0.12, requests using an authenticated SOCKS proxy can expose the proxy's credentials to the origin because NettyRequestFactory and NettyRequestSender attach Proxy-Authorization without confirming that the request is being sent to an HTTP proxy. With preemptive proxy authentication, the header is attached to a plaintext HTTP request, exposing credentials such as directly reversible Basic credentials to the origin. With the default non-preemptive flow, a hostile origin can return a 407 response and ProxyUnauthorized407Interceptor sends the proxy credentials through the existing SOCKS tunnel, including NTLM, Kerberos, and SPNEGO credentials. Releases before 2.1.0 lack SOCKS proxy support. This issue is fixed in versions 2.16.1 and 3.0.12. | ||||
| CVE-2026-94611 | 1 Goauthentik | 1 Authentik | 2026-09-24 | 8.1 High |
| authentik is an open-source identity provider. Prior to 2026.2.7, 2026.5.7, and 2026.8.2, authentik API serializers return stored credentials when an account has view permission on an affected configuration, even when that account is not authorized to change the configuration or read its secrets. Affected configurations include one-time code delivery by mail or SMS, outbound provisioning targets, device trust integrations, identity sources, the Kubernetes outpost integration, applications using a client or shared secret, and applications using a proxy provider. Deployments are affected when view permission is granted to accounts that are not intended to read these credentials; deployments where every viewer is permitted to read them are not affected. This issue is fixed in versions 2026.2.7, 2026.5.7, and 2026.8.2. | ||||
| CVE-2026-79306 | 1 Usmannasir | 1 Cyberpanel | 2026-09-24 | 6.5 Medium |
| CyberPanel v1.9.1 contains a path traversal vulnerability in the compress method exposed through the /filemanager/controller endpoint. An authenticated remote attacker with ownership of any configured domain can supply absolute or otherwise out-of-scope file paths in the listOfFiles JSON property, together with attacker-controlled basePath and compressedFileName values, in a method=compress request. Because the application validates only domain ownership and does not canonicalize or restrict these paths to the authorized site directory, the backend appends them to zip or tar archive commands and executes them as the website externalApp user, allowing disclosure of arbitrary readable files through the generated archive. | ||||
| CVE-2026-34474 | 1 Zte | 2 Zxhn H108n, Zxhn H298a | 2026-09-24 | 7.5 High |
| Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6. A crafted request to the router web interface can expose sensitive device and account information. In affected builds, the response may include the administrator password and WLAN PSK, enabling authentication bypass and network compromise. Some firmware versions may expose only partial identifiers (e.g., serial number, ESSID, MAC addresses). | ||||
| CVE-2026-35869 | 2026-09-24 | 9.8 Critical | ||
| A Command Injection vulnerability exists in the bs_SetLimitCli_info function within the libshare.so library of LB-link Router AC450M V4.0.0. This flaw occurs due to insufficient validation and sanitization of user-supplied input before it is passed to a system-level command execution context. An attacker can exploit this vulnerability by injecting specially crafted shell metacharacters or payloads into the vulnerable parameter, resulting in the execution of arbitrary operating system commands. | ||||
| CVE-2026-34472 | 1 Zte | 2 Zxhn H188a, Zxhn H188a Firmware | 2026-09-24 | 7.1 High |
| Unauthenticated credential disclosure in the wizard interface in ZTE ZXHN H188A V6.0.10P2_TE and V6.0.10P3N3_TE allows unauthenticated attackers on the local network to retrieve sensitive credentials from the router's web management interface, including the default administrator password, WLAN PSK, and PPPoE credentials. In some observed cases, configuration changes may also be performed without authentication. | ||||
| CVE-2026-48855 | 1 Erlang | 4 Erlang/otp, Erlang\/otp, Erlang\/ssh and 1 more | 2026-09-24 | 6.5 Medium |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Erlang OTP ssh (ssh_sftpd module) allows File Discovery. The SSH_FXP_READLINK handler in ssh_sftpd sends the raw result of file:read_link/2 to the client without calling chroot_filename/2 to strip the backend root prefix. An authenticated SFTP client can create a symlink inside the chroot pointing to /; ssh_sftpd resolves the target to the absolute backend root and stores it on disk. Reading the symlink back via SSH_FXP_READLINK returns that absolute path, for example /data/sftp, instead of the chrooted value /. The information disclosed is the absolute filesystem path of the SFTP root directory and of any symlink targets within it. No file contents, credentials, or access to paths outside the root directory are obtainable through this issue alone. This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl. This issue affects OTP from OTP 17.0 before OTP 27.3.4.13, OTP 28.5.0.2, and OTP 29.0.2, corresponding to ssh from 3.0.1 before 5.2.11.8, 5.5.2.1, and 6.0.1. Whether OTP before OTP 17.0, corresponding to ssh before 3.0.1, is affected is unknown. | ||||
| CVE-2026-47132 | 1 Thorsten | 1 Phpmyfaq | 2026-09-24 | 5.4 Medium |
| phpMyFAQ is an open source FAQ web application. Prior to version 4.2.0-alpha, an authenticated SQL LIKE wildcard injection vulnerability in phpMyFAQ’s chat user search allows any logged-in user to bypass the intended display-name search filter and enumerate active users. The endpoint escapes SQL string syntax but does not escape `%` and `_`, which remain active `LIKE` wildcards. Version 4.2.0-alpha patches the issue. | ||||
| CVE-2026-58941 | 1 Google | 1 Android | 2026-09-24 | 7.8 High |
| In multiple functions of iommu.c, there is a possible out of bounds read/write due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-97179 | 1 O2oa | 1 O2oa | 2026-09-24 | 4.3 Medium |
| A security vulnerability has been detected in O2OA up to 9.5.3/10.0.2. This vulnerability affects the function list of the file o2server/x_base_core_project/src/main/java/com/x/base/core/project/connection/CipherConnectionAction.java of the component Cipher Connection Handler. Such manipulation of the argument fileUrl leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-96772 | 1 Intelliants | 1 Subrion Cms | 2026-09-24 | 5.3 Medium |
| A security flaw has been discovered in Intelliants Subrion CMS up to 4.2.1. This affects an unknown part of the file /actions.json?action=assign-owner. The manipulation of the argument q results in information disclosure. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||