| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| Incorrect access control in the realtime.cgi endpoint of Deep Sea Electronics devices DSE855 v1.1.0 to v1.1.26 allows attackers to gain access to the admin panel and complete control of the device. |
| Improper Authentication vulnerability in WF Steuerungstechnik GmbH airleader MASTER allows Authentication Bypass.This issue affects airleader MASTER: 3.00571. |
| A security flaw has been discovered in Papermerge DMS up to 3.5.3. This issue affects some unknown processing of the component Authorization Token Handler. Performing manipulation results in improper authorization. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| The MIB3 infotainment unit used in Skoda and Volkswagen vehicles does not incorporate any privilege separation for the proprietary inter-process communication mechanism, leaving attackers with presence in the system an ability to undermine access control restrictions implemented at the operating system level.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| A vulnerability was found in Weitong Mall 1.0.0. It has been classified as critical. This affects an unknown part of the component Sale Endpoint. The manipulation of the argument ID leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. |
| Improper authentication vulnerability in Novakon P series allows unauthenticated attackers to upload and download any application from/to the device.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build
2026.02.06 (commit d0f97fd9). |
| OpenObserve is a cloud-native observability platform. Prior to version 0.16.0, organization invitation tokens do not expire once issued, remain valid even after the invited user is removed from the organization, and allow multiple invitations to the same email with different roles where all issued links remain valid simultaneously. This results in broken access control where a removed or demoted user can regain access or escalate privileges. This issue has been patched in version 0.16.0. |
| An authentication bypass vulnerability exists in KCM3100 Ver1.4.2 and earlier. If this vulnerability is exploited, an attacker may bypass the authentication of the product from within the LAN to which the product is connected. |
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product
features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz.
This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365).
Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices.
This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. |
| Nix is a package manager for Linux and other Unix systems. Starting in version 1.11 and prior to versions 2.18.8 and 2.24.8, `<nix/fetchurl.nix>` did not verify TLS certificates on HTTPS connections. This could lead to connection details such as full URLs or credentials leaking in case of a man-in-the-middle (MITM) attack. `<nix/fetchurl.nix>` is also known as the builtin derivation builder `builtin:fetchurl`. It's not to be confused with the evaluation-time function `builtins.fetchurl`, which was not affected by this issue. A user may be affected by the risk of leaking credentials if they have a `netrc` file for authentication, or rely on derivations with `impureEnvVars` set to use credentials from the environment. In addition, the commonplace trust-on-first-use (TOFU) technique of updating dependencies by specifying an invalid hash and obtaining it from a remote store was also vulnerable to a MITM injecting arbitrary store objects. This also applied to the impure derivations experimental feature. Note that this may also happen when using Nixpkgs fetchers to obtain new hashes when not using the fake hash method, although that mechanism is not implemented in Nix itself but rather in Nixpkgs using a fixed-output derivation. The behavior was introduced in version 1.11 to make it consistent with the Nixpkgs `pkgs.fetchurl` and to make `<nix/fetchurl.nix>` work in the derivation builder sandbox, which back then did not have access to the CA bundles by default. Nowadays, CA bundles are bind-mounted on Linux. This issue has been fixed in Nix 2.18.8 and 2.24.8. As a workaround, implement (authenticated) fetching with `pkgs.fetchurl` from Nixpkgs, using `impureEnvVars` and `curlOpts` as needed. |
| An authentication bypass vulnerability exists in LG Innotek camera models LND7210 and LNV7210R. The vulnerability allows a malicious actor to gain access to camera information including user account information. |
| Icinga Director is an Icinga config deployment tool. A Security vulnerability has been found starting in version 1.0.0 and prior to 1.10.4 and 1.11.4 on several director endpoints of REST API. To reproduce this vulnerability an authenticated user with permission to access the Director is required (plus api access with regard to the api endpoints). And even though some of these Icinga Director users are restricted from accessing certain objects, are able to retrieve information related to them if their name is known. This makes it possible to change the configuration of these objects by those Icinga Director users restricted from accessing them. This results in further exploitation, data breaches and sensitive information disclosure. Affected endpoints include icingaweb2/director/service, if the host name is left out of the query; icingaweb2/directore/notification; icingaweb2/director/serviceset; and icingaweb2/director/scheduled-downtime. In addition, the endpoint `icingaweb2/director/services?host=filteredHostName` returns a status code 200 even though the services for the host is filtered. This in turn lets the restricted user know that the host `filteredHostName` exists even though the user is restricted from accessing it. This could again result in further exploitation of this information and data breaches. Icinga Director has patches in versions 1.10.4 and 1.11.4. If upgrading is not feasible, disable the director module for the users other than admin role for the time being. |
| An Authentication Bypass vulnerability on UniFi Protect Application with Auto-Adopt Bridge Devices enabled could allow a malicious actor with access to UniFi Protect Cameras adjacent network to take control of UniFi Protect Cameras. |
| An improper authorization flaw exists in the Ansible Automation Controller. This flaw allows an attacker using the k8S API server to send an HTTP request with a service account token mounted via `automountServiceAccountToken: true`, resulting in privilege escalation to a service account. |
| A vulnerability was found in GL.iNet GL-A1300 Slate Plus, GL-AR300M16 Shadow, GL-AR300M Shadow, GL-AR750 Creta, GL-AR750S-EXT Slate, GL-AX1800 Flint, GL-AXT1800 Slate AX, GL-B1300 Convexa-B, GL-B3000 Marble, GL-BE3600 Slate 7, GL-E750, GL-E750V2 Mudi, GL-MT300N-V2 Mango, GL-MT1300 Beryl, GL-MT2500 Brume 2, GL-MT3000 Beryl AX, GL-MT6000 Flint 2, GL-SFT1200 Opal, GL-X300B Collie, GL-X750 Spitz, GL-X3000 Spitz AX, GL-XE300 Puli and GL-XE3000 Puli AX 4.x. It has been rated as problematic. This issue affects some unknown processing of the component Download Interface. The manipulation leads to improper authorization. It is recommended to upgrade the affected component. |
| A vulnerability was identified in h-moses moga-mall up to 392d631a5ef15962a9bddeeb9f1269b9085473fa. This vulnerability affects the function addProduct of the file src/main/java/com/ms/product/controller/PmsProductController.java. Such manipulation of the argument objectName leads to unrestricted upload. The attack may be performed from remote. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. |
| This CVE only affects Kubernetes clusters that utilize the in-tree gitRepo volume to clone git repositories from other pods within the same node. Since the in-tree gitRepo volume feature has been deprecated and will not receive security updates upstream, any cluster still using this feature remains vulnerable. |
| A broken authorization vulnerability in Kiloview NDI N30 allows a remote unauthenticated attacker to deactivate user verification, giving them access to state changing actions that should only be initiated by administratorsThis issue affects
Kiloview NDI N30
and was fixed in Firmware version later than 2.02.0246 |
