| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_pci: fix vq info pointer lookup via wrong index
Unbinding a virtio balloon device:
echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind
triggers a NULL pointer dereference. The dmesg says:
BUG: kernel NULL pointer dereference, address: 0000000000000008
[...]
RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0
Call Trace:
<TASK>
vp_del_vqs+0x121/0x230
remove_common+0x135/0x150
virtballoon_remove+0xee/0x100
virtio_dev_remove+0x3b/0x80
device_release_driver_internal+0x187/0x2c0
unbind_store+0xb9/0xe0
kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180
vfs_write+0x2a9/0x3b0
ksys_write+0x5c/0xd0
do_syscall_64+0x54/0x230
entry_SYSCALL_64_after_hwframe+0x29/0x31
[...]
</TASK>
The virtio_balloon device registers 5 queues (inflate, deflate, stats,
free_page, reporting) but only the first two are unconditional. The
stats, free_page and reporting queues are each conditional on their
respective feature bits. When any of these features are absent, the
corresponding vqs_info entry has name == NULL, creating holes in the
array.
The root cause is an indexing mismatch introduced when vq info storage
was changed to be passed as an argument. vp_find_vqs_msix() and
vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i'
is the caller's sparse array index. However, the virtqueue itself gets
vq->index assigned from queue_idx, a dense index that skips NULL
entries. When holes exist, 'i' and queue_idx diverge. Later,
vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense
index into the sparsely-populated array, and hits NULL.
Fix this by storing info at vp_dev->vqs[queue_idx] instead of
vp_dev->vqs[i], so the store index matches the lookup index
(vq->index). Apply the fix to both the MSIX and INTX paths. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis. |
| Heap buffer overflow in libyuv in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted video file. (Chromium security severity: High) |
| Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Inappropriate implementation in V8 in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: High) |
| Inappropriate implementation in V8 in Google Chrome prior to 150.0.7871.125 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Cross Site Scripting vulnerability in xxl-job-admin v.3.0.0 allows a remote attacker to execute arbitrary code via a crafted HTTP GET request containing a malicious script |
| Hono before 4.11.10 contains a timing attack vulnerability in the basicAuth and bearerAuth middlewares due to non-constant-time string comparison in the timingSafeEqual function. Attackers can exploit early termination of string equality checks to infer valid credentials through precise timing measurements. |
| Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| LogicalDOC Enterprise up to and for v9.1.1 is vulnerable to blind SQL injection in the ComparisonServlet component, allowing authenticated user to manipulate SQL queries via crafted input. |
| EQ-3 Eqiva CC-RT-BLE Bluetooth Smart Radiator Thermostat Firmware up to the latest version 1.46 was discovered to allow unsecured bluetooth connections. This vulnerability allows attackers to gain full access to the device without authentication. |
| An issue was discovered in cyrus-imapd in Cyrus IMAP through 3.12.2. GENURLAUTH-issued tokens can bypass ACLs. Any authenticated user could mint a URLAUTH token (via the GENURLAUTH command) for any mailbox they could name, even without read access on it. This would allow reading mail from mailboxes despite having no granted permissions. |
| libpvestorage-perl v9.1.1 and libpve-storage-perl v8.3.7 were discovered to contain an XML External Entity (XXE) vulnerability. |
| HCL Aftermarket EPC is vulnerable to brute force attacks since application doesn’t have captcha implemented. It can lead to various security issues like brute force , automated attacks & account enumeration |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.) |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space). |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: fix UAF in dma_buf_fd() tracepoint
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c90
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely. |
