| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| stoatchat versions before 0.15.0 fail to block the IPv6 unspecified address (::) in the SSRF blocklist, allowing unauthenticated attackers to bypass protections via the /proxy and /embed endpoints. Attackers can craft requests using IPv6 literal syntax to access services on the loopback interface and retrieve sensitive internal content. |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require.
smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked.
A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token.
Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one.
oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges. |
| sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, group_comments in sqlparse/engine/grouping.py repeatedly rescans comment-only statements before the MAX_GROUPING_TOKENS guard, causing quadratic CPU consumption through sqlparse.parse() and sqlparse.format(sql, strip_comments=True). This issue is fixed in version 0.6.0. |
| The Gallery by BestWebSoft plugin for WordPress is vulnerable to SQL Injection via the '_gallery_order_{post_id}' parameter array keys in all versions up to, and including, 4.7.9. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. The `gllr_save_postdata()` function stores unsanitized array keys from `$_POST` directly into post meta, which are later used in SQL queries without prepared statements. This makes it possible for authenticated attackers, with Editor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A vulnerability has been found in gomarble-ai facebook-ads-mcp-server 0.1.0. The impacted element is the function fetch_pagination_url of the file server.py. Such manipulation leads to server-side request forgery. The attack can be launched remotely. The name of the patch is 4e53875aa22e8991c2fa4a7660d86e1caba66659. Applying a patch is advised to resolve this issue. |
| Lemonldap::NG::Portal versions from 2.0.0 before 2.16.9, from 2.17.0 before 2.21.5, from 2.22.0 before 2.23.3 for Perl allow authentication bypass via an OAuth2 state parameter stored as an SSO session in the GitHub and LinkedIn backends.
Before redirecting to the identity provider, extractFormInfo() creates the state session with the positional call `getApacheSession( undef, 1, 0, 'GitHubState' )`. getApacheSession() takes a session id followed by a named argument hash, so the trailing arguments become that hash, `kind` defaults to SSO, and the state is written to the global session storage as a regular SSO session. Its identifier is handed to the unauthenticated visitor as the state parameter of the redirection URL.
Any visitor who reaches the GitHub or LinkedIn endpoint can replay that identifier as a session cookie and obtain a valid SSO session without authenticating. The session holds neither _user nor authenticationLevel, which the shipped bootstrap configuration accepts because it grants virtual hosts a "default => accept" access rule; deployments whose rules test the user or require an authentication level are less exposed. Only configurations with the GitHub or LinkedIn authentication module enabled are affected. |
| The WP Travel Engine – Tour Booking Plugin – Tour Operator Software plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 6.8.4. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to view private booking billing details — including the victim customer's first name, last name, email address, street address, city, and phone number — rendered as default values in checkout form fields by binding an arbitrary booking ID to the attacker's session. The only access control on the endpoint is a frontend nonce that is publicly emitted to all visitors via the wteL10n global on trip pages, meaning it provides CSRF protection only and does not restrict unauthenticated access. |
| Domoticz versions prior to 2026.3 contains a stored cross-site scripting vulnerability in the mobile dashboard that allows authenticated attackers to inject arbitrary HTML and JavaScript by updating Text or Alert subtype device values through the API. The mobile dashboard renders device data via ng-bind-html with only an nl2br() transform that performs no HTML escaping, allowing attackers to store malicious payloads that execute in any administrator's browser upon viewing the mobile dashboard, enabling session cookie theft and account takeover. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 is vulnerable to buffer overflow in the IXF IMPORT parser. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: validate DFS referral string offsets
parse_dfs_referrals() validates that the response header and referral
array fit in the received buffer, but each referral also contains string
offsets supplied by the server.
Those offsets are used to compute the DfsPath and NetworkAddress string
pointers without checking whether they still point inside the response
buffer. A malformed referral can therefore make the computed pointer
exceed the end of the buffer. The resulting negative max_len is then
passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it
to kstrndup() as a size_t, allowing strnlen() to read out of bounds.
Validate each string offset before deriving the string pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
[email protected] reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Validate NIX maximum LFs correctly
NIX maximum number of LFs can be set via devlink command
but that can be done before assigning any LFs to a PF/VF.
The condition used to check whether any LFs are assigned is
incorrect. This patch fixes that condition. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix xfrm state cache insertion race
The xfrm input state cache insertion code checks the validity of
the state before acquiring the global xfrm_state_lock. Thus it's
possible for someone else to kill the state after it passed the
validity check, and then the insertion will add the dead state
to the cache.
Fix this by moving the validity check inside the lock.
This entire function is called on the input path, where BH must
be off (e.g., the caller of this function xfrm_input acquires
its spinlocks without disabling BH).
So there is no need to disable BH here or take the RCU read lock.
Remove both and replace them with an assertion that trips if BH
is accidentally enabled on some future calling path. |
