| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm_crb: Check ACPI_COMPANION() against NULL during probe
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
tpm_crb driver. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack slot index in nospec checks
check_stack_write_fixed_off() computes the byte slot for a fixed-offset
stack write as -off - 1, and records each written byte in slot_type[] with
(slot - i) % BPF_REG_SIZE.
The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a
4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the
pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates
bytes 7..4. That can leave the second half-slot write without nospec_result
even though the bytes being overwritten still require sanitization.
Use the same slot index in the sanitization pre-check that the write path uses
when updating slot_type[]. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: msc313: fix NULL deref in shared IRQ handler at probe
msc313_rtc_probe() calls devm_request_irq() with IRQF_SHARED and
&pdev->dev as the cookie, but platform_set_drvdata() is only called
later after the clock setup. With a shared IRQ line, another device
on the same line can trigger the handler in that window. The
handler does dev_get_drvdata() on the cookie, gets NULL, and
dereferences priv->rtc_base in interrupt context.
Pass priv as the cookie directly so the handler reads it from
dev_id without the lookup, removing the dependency on probe order. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: FCP: Fix NULL pointer dereference in interface lookup
A malformed USB device can provide a vendor-specific interface without
any endpoint descriptors. fcp_find_fc_interface() currently selects the
first vendor-specific interface and reads endpoint 0 from it, without
checking whether the interface actually has any endpoints.
When bNumEndpoints is zero, no endpoint array is allocated for the parsed
alternate setting, so get_endpoint(..., 0) yields an invalid endpoint
descriptor pointer. Dereferencing it through usb_endpoint_num() then
triggers a NULL pointer dereference.
Skip vendor-specific interfaces that do not have any endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix insn_aux_data leak on verifier err_free_env path
When bpf_check() allocates env->insn_aux_data successfully but later
fails to allocate env->succ, it jumps directly to err_free_env.
The existing vfree(env->insn_aux_data) sits before the err_free_env
label, so that direct jump bypasses it and leaks insn_aux_data.
Move vfree(env->insn_aux_data) into err_free_env so all early and late
exit paths release it consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix potential invalid pointer deref in group_process_tiler_oom()
If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid
pointer. Make sure we set it to NULL in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints
Regular AFS files correctly use afs_file_aops which have release_folio
set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them
when fscache is enabled (set via afs_vnode_set_cache()).
Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide
a release_folio callback. However, afs_apply_status() unconditionally
calls mapping_set_release_always() for these.
In such case when memory management code attempts to release folios,
filemap_release_folio() checks folio_needs_release() which
returns true due to AS_RELEASE_ALWAYS being set. Since there is no
release_folio callback, it falls through to try_to_free_buffers(),
which at present expects buffer_heads to be not null. For symlinks
and mountpoints without buffer_heads, this causes pointer dereference.
[dh: Added more bits that were missed] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: fix NPD in bo_meminfo()
When a buffer object is purged, its ttm.resource is set to NULL via the
TTM pipeline gutting flow. However, the BO remains in the client's
object list until userspace explicitly closes the GEM handle. If memory
stats are queried during this time, accessing bo->ttm.resource->mem_type
will result in a NULL pointer dereference.
Fix this by safely skipping purged BOs in bo_meminfo, as they no longer
consume any memory.
User is getting NPD on device resume, and possible theory is that in
bo_move(), if we need to evict something to SYSTEM to save the CCS state,
but the BO is marked as dontneed, this won't trigger a move but will
nuke the pages, leaving us with a NULL bo resource. And the meminfo()
doesn't look ready to handle a NULL resource.
v2 (Sashiko):
- There could potentially be other cases where we might end up with a
NULL resource, so make this a general NULL check for now.
(cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix tx ident leak for commands without a response
Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding
TX ident") changed ident allocation to use an IDA, releasing idents in
l2cap_put_ident() when the matching response command is received.
But identifiers allocated for commands that have no response defined
are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for
the lifetime of an LE CoC channel, so a peer streaming data to the
host exhausts the 1-255 ident range after 254 credit packets. From
then on l2cap_get_ident() fails:
kernel: Bluetooth: Unable to allocate ident: -28
and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0,
which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling
identifier 0x00 is an invalid identifier and shall never be used in
any command"). Remote stacks that validate the ident drop these
commands, never receive new credits, and the channel stalls
permanently. With default socket buffers this happens after roughly 0.5 MB
of received data (the exact amount depends on the socket receive buffer):
< ACL Data TX: Handle 2048 flags 0x00 dlen 12
LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4
Source CID: 64
Credits: 1
Release the ident immediately after sending L2CAP_LE_CREDITS since no
response will ever release it. Use a local variable instead of
chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on
(e.g. a pending reconfigure) is not overwritten by a credit packet.
Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so
idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released
when the response arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Reject invalid indirect BO handle in indirect CSD setup
v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object
from a userspace-supplied handle but never checks the result. A bogus
or stale handle makes drm_gem_object_lookup() return NULL, which is
then stored in info->indirect and only dereferenced later when the
indirect CSD job runs, turning a userspace mistake into a NULL pointer
dereference in the kernel.
Bail out with -ENOENT as soon as the lookup fails, so the bad handle is
rejected at submission time. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cake: reject overhead values that underflow length
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/core: Avoid enabling BRS from the SVM reload path
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: free generic chips on unbind
irq_alloc_domain_generic_chips() allocates generic chip data that must
be freed via irq_domain_remove_generic_chips(). The devres action
mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which
only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set.
Call irq_domain_remove_generic_chips() explicitly before
irq_domain_remove() instead. |
