| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 > /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.11, PyEnvCfg.write() writes prompt values verbatim to the line-oriented pyvenv.cfg format while PyEnvCfg._read_values() parses the file with str.splitlines() and accepts the last value for duplicate keys. An attacker who influences --prompt, VIRTUALENV_PROMPT, or configuration input can insert a recognized line boundary and additional keys, including home, causing consumers to use an attacker-selected base interpreter or corrupted environment metadata. The security impact requires prompt input from outside the operator's trust boundary; directly supplied prompt content primarily corrupts the operator's own environment. This issue is fixed in version 21.7.11. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.12, BatchActivator.quote() returns prompt text unchanged before activate.bat inserts it into a cmd.exe set "VAR=value" statement. An attacker who influences --prompt, VIRTUALENV_PROMPT, or the corresponding configuration value can include a double quote that closes the assignment and leaves following cmd.exe operators as executable syntax. When a user activates the generated Windows environment, the injected commands run with that user's privileges. This issue is fixed in version 21.7.12. |
| Unverified ownership in Barman snapshot backup deletion allows a principal who can write the backup catalog to cause Barman to delete unrelated cloud snapshots. When a snapshot backup is deleted, either explicitly or by retention policy enforcement, Barman reads the snapshot identifiers from the backup.info file and passes them to the cloud provider's delete API using Barman's own credentials, without verifying that the snapshots belong to that backup. An attacker who can overwrite backup.info but lacks snapshot delete permissions can substitute the identifiers of other snapshots, causing Barman to delete any snapshot its cloud identity can reach on AWS, Microsoft Azure, or Google Cloud. Exploitation requires a deployment where the principal that writes the backup catalog is separate from the identity Barman uses to delete snapshots. Barman versions from 3.4.0 (Google Cloud), 3.6.0 (Azure), and 3.7.0 (AWS) up to and including 3.20.0 are affected. The issue is fixed in Barman 3.20.1. |
| MongoDB SQL Schema Builder CLI records its startup configuration to standard output and, when file logging is enabled, to a log file on disk. Certain connection settings were written without redaction, so authentication material supplied by the operator could appear in plaintext in that diagnostic output. A local user with read access to the terminal session or the log directory, or anyone with access to a location where those logs are subsequently collected, could obtain those values. |
| An authenticated user with edit permission on one folder can move a library panel into another folder where they only have view permission, through the library elements API or the equivalent App Platform resource. The update path did not check library panel create permission on the destination folder (incorrect authorization). No data from the destination folder is disclosed, and existing content there cannot be changed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: clear txcb->last before writing each descriptor
bcmasp_xmit() only wrote txcb->last = true for the final fragment
of an SKB; non-final fragments left the field untouched. If a
descriptor slot was reused while it still held a stale true from
a previous SKB (possible when tx_spb_ring_full() underreported
fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and
call dev_consume_skb_any() prematurely, freeing the sk_buff while
its remaining fragments were still in flight.
Unconditionally clear txcb->last before the conditional set so every
descriptor slot starts from a known false state regardless of what a
prior transmission left behind. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault into a kernel panic.
Record both tracepoints in raw_tp_null_args[] and mark argument one as
a non-pointer. This preserves scalar access to the cookie while rejecting
direct and helper-mediated pointer use. Merely marking it nullable would
not suffice because SEND_SIG_PRIV is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rolling window of temporary pages is needed when decompressing.
It can save a lot of temporary memory, e.g.
601,960-byte data can be compressed into a 256k LZ4 compressed extent,
which means it needs 146 extra pages per request in the worst case if
rolling decompression is disabled.
However, the upstream LZ4 implementation is not under EROFS' control:
For example, the literal copy memmove() may still **copy long literals
backward** on x86 based on the address comparison even when the source
and destination ranges do not overlap (IOWs, inline decompression
doesn't need to be considered here). That breaks the rolling assumption
and makes the optimization broken.
Disable it for now to make sure the data correctness first since EROFS
is used everywhere now: The rolling window approach can be revived once
we either ensure that the official LZ4 code always copies forward for
non-overlapping ranges or maintain our own LZ4 implementation in EROFS.
The main impact is a higher runtime memory footprint; However, recent
commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression") helps mitigate this when enabled but it's still not
perfect.
[1] https://www.usenix.org/conference/atc19/presentation/gao
§ 3.3 Decompression |
| A path traversal vulnerability (CWE-22) in the embedded VMDK filesystem extractor in Google OSV-SCALIBR versions 0.3.6 through 0.5.0 allows an attacker who controls the scan target to write arbitrary files to the host system. When scanning crafted VMDK images, insufficient validation of archive path entries allows file extractions to escape destination directories. |
| A flaw was found in GDB's STABS debug format parser. The
read_member_functions() function in gdb/stabsread.c contains a linked
list removal bug in the code that separates destructor and non-destructor
member functions of C++ classes. The bug causes the destructor entries to
remain in the main function list while the list length counter is
decremented, resulting in an out-of-bounds write when the function list
is copied to its final allocated array. An attacker can craft an ELF
binary with malicious .stab and .stabstr sections that triggers this
out-of-bounds write when a user opens the file in GDB and performs any
symbol-inspection operation such as setting a breakpoint. The inferior
process does not need to be executed. Under controlled conditions, this
was demonstrated to achieve execution of arbitrary commands within the
GDB process. |
| A stack-based buffer overflow vulnerability exists in the web management interface of TOTOLINK N150RT (NTR150) firmware V3.4.0-B20201030. It is reachable through the route /boafrm/formPortFw (port-forwarding configuration handler) and is triggered by the ip_subnet and fw_ip request parameters during the rule-addition flow. |
| Reflected XSS in Netron versions <=9.1.2 on desktop application through unsanitized node names allows an attacker to hide certain nodes, perform port scanning or abuse a Chrome n-day to achieve Remote Code Execution. |
| Reflected XSS in Netron versions <=9.1.2 on desktop application through unsanitized node names allows an attacker to hide certain nodes, perform port scanning or abuse a Chrome n-day to achieve Remote Code Execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN ->
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally. |
