| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in nutzam NutzBoot up to 2.6.0-SNAPSHOT. The impacted element is an unknown function of the file nutzboot-demo/nutzboot-demo-simple/nutzboot-demo-simple-web3j/src/main/java/io/nutz/demo/simple/module/EthModule.java of the component Ethereum Wallet Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode='3', versionName='2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the "system" user, allowing it to interact with the baseband processor and perform various other sensitive actions. |
| Lack of access control in ChallengeSolves (/api/v1/challenges/<challenge id>/solves) of CTFd v2.0.0 - v3.7.2 allows authenticated users to retrieve a list of users who have solved the challenge, regardless of the Account Visibility settings. The issue is fixed in v3.7.3+. |
| The MongoDB Windows installation MSI may leave ACLs unset on custom installation directories allowing a local attacker to introduce executable code to MongoDB's process via DLL hijacking. This issue affects MongoDB Server v6.0 version prior to 6.0.25, MongoDB Server v7.0 version prior to 7.0.21 and MongoDB Server v8.0 version prior to 8.0.5 |
| Improper access control for some Edge Orchestrator software for Intel(R) Tiber™ Edge Platform may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access. |
| A valid, authenticated user with sufficient privileges and who is aware of Continuous Compliance’s internal database configurations can leverage the application’s built-in Connector functionality to access Continuous Compliance’s internal database. This allows the user to explore the internal database schema and export its data, including the properties of Connecters and Rule Sets. |
| The Related Posts, Inline Related Posts, Contextual Related Posts, Related Content By PickPlugins plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.0.58 via the wp_ajax_nopriv_related_post_ajax_get_post_ids AJAX action. This makes it possible for unauthenticated attackers to extract sensitive data including titles of posts in draft status. |
| Insecure permissions in the Bluetooth Low Energy (BLE) component of Fire-Boltt Artillery Smart Watch NJ-R6E-10.3 allow attackers to cause a Denial of Service (DoS). |
| Northern.tech Mender 3.3.x before 3.3.2, 3.5.x before 3.5.0, and 3.6.x before 3.6.0 has Incorrect Access Control and allows users to change their roles and could allow privilege escalation from a low-privileged read-only user to a high-privileged user. |
| A vulnerability classified as critical was found in Xiongmai AHB7804R-MH-V2, AHB8004T-GL, AHB8008T-GL, AHB7004T-GS-V3, AHB7004T-MHV2, AHB8032F-LME and XM530_R80X30-PQ_8M. Affected by this vulnerability is an unknown functionality of the component Sofia Service. The manipulation with the input ff00000000000000000000000000f103250000007b202252657422203a203130302c202253657373696f6e494422203a202230783022207d0a leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-260605 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| conda-forge infrastructure holds common configurations and settings for key pieces of the conda-forge infrastructure.
Between 2025-02-10 and 2025-04-01, conda-forge infrastructure used the wrong token for Azure's cf-staging access. This bug meant that any feedstock maintainer could upload a package to the conda-forge channel, bypassing our feedstock-token + upload process. The security logs on anaconda.org were check for any packages that were not copied from the cf-staging to the conda-forge channel and none were found. |
| A vulnerability, which was classified as critical, has been found in veal98 小牛肉 Echo 开源社区系统 4.2. This issue affects the function uploadMdPic of the file /discuss/uploadMdPic. The manipulation of the argument editormd-image-file leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in ProudMuBai GoFilm 1.0.0/1.0.1. Impacted is the function SingleUpload of the file /server/controller/FileController.go. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Password Protected – Ultimate Plugin to Password Protect Your WordPress Content with Ease plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.6.6 via the API. This makes it possible for authenticated attackers, with subscriber access or higher, to extract post titles and content, thus bypassing the plugin's password protection. |
| An issue was discovered in SonarSource SonarQube before 9.9.5 LTA and 10.x before 10.5. A SonarQube user with the Administrator role can modify an existing configuration of a GitHub integration to exfiltrate a pre-signed JWT. |
| Improper access control validation in firmware of some Solidigm DC Products may allow an attacker with physical access to gain unauthorized access or an attacker with local access to potentially enable denial of service. |
| Improper access removal handling in firmware of some Solidigm DC Products may allow an attacker with physical access to gain unauthorized access. |
| An issue was discovered on IROAD Dashcam V devices. It uses an unregistered public domain name as an internal domain, creating a security risk. During analysis, it was found that this domain was not owned by IROAD, allowing an attacker to register it and potentially intercept sensitive device traffic. If the dashcam or related services attempt to resolve this domain over the public Internet instead of locally, it could lead to data exfiltration or man-in-the-middle attacks. |
| A vulnerability was found in Projeqtor up to 12.0.2. It has been rated as critical. Affected by this issue is some unknown functionality of the file /tool/saveAttachment.php. The manipulation of the argument attachmentFiles leads to unrestricted upload. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 12.0.3 is able to address this issue. It is recommended to upgrade the affected component. The vendor explains, that "this vulnerability can be exploited only on not securely installed instances, as it is adviced during product install: attachment directory should be out of web reach, so that even if executable file can be uploaded, it cannot be executed through the web." |
| A vulnerability in the management interface access control list (ACL) processing feature in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass configured ACLs for the SSH, NetConf, and gRPC features.
This vulnerability exists because management interface ACLs have not been supported on Cisco IOS XR Software Packet I/O infrastructure platforms for Linux-handled features such as SSH, NetConf, or gRPC. An attacker could exploit this vulnerability by attempting to send traffic to an affected device. A successful exploit could allow the attacker to bypass an ingress ACL that is applied on the management interface of the affected device. |
