| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: USB: Fix wrong-direction WARNING in plusb.c
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
The BOS descriptor defines a root descriptor and is the base descriptor for
accessing a family of related descriptors.
Function 'usb_get_bos_descriptor()' encounters an iteration issue when
skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in
the same descriptor being read repeatedly.
To address this issue, a 'goto' statement is introduced to ensure that the
pointer and the amount read is updated correctly. This ensures that the
function iterates to the next descriptor instead of reading the same
descriptor repeatedly. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()
In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in
C") kvm_start_guest() became idle_kvm_start_guest(). The old code
allocated a stack frame on the emergency stack, but didn't use the
frame to store anything, and also didn't store anything in its caller's
frame.
idle_kvm_start_guest() on the other hand is written more like a normal C
function, it creates a frame on entry, and also stores CR/LR into its
callers frame (per the ABI). The problem is that there is no caller
frame on the emergency stack.
The emergency stack for a given CPU is allocated with:
paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;
So emergency_sp actually points to the first address above the emergency
stack allocation for a given CPU, we must not store above it without
first decrementing it to create a frame. This is different to the
regular kernel stack, paca->kstack, which is initialised to point at an
initial frame that is ready to use.
idle_kvm_start_guest() stores the backchain, CR and LR all of which
write outside the allocation for the emergency stack. It then creates a
stack frame and saves the non-volatile registers. Unfortunately the
frame it creates is not large enough to fit the non-volatiles, and so
the saving of the non-volatile registers also writes outside the
emergency stack allocation.
The end result is that we corrupt whatever is at 0-24 bytes, and 112-248
bytes above the emergency stack allocation.
In practice this has gone unnoticed because the memory immediately above
the emergency stack happens to be used for other stack allocations,
either another CPUs mc_emergency_sp or an IRQ stack. See the order of
calls to irqstack_early_init() and emergency_stack_init().
The low addresses of another stack are the top of that stack, and so are
only used if that stack is under extreme pressue, which essentially
never happens in practice - and if it did there's a high likelyhood we'd
crash due to that stack overflowing.
Still, we shouldn't be corrupting someone else's stack, and it is purely
luck that we aren't corrupting something else.
To fix it we save CR/LR into the caller's frame using the existing r1 on
entry, we then create a SWITCH_FRAME_SIZE frame (which has space for
pt_regs) on the emergency stack with the backchain pointing to the
existing stack, and then finally we switch to the new frame on the
emergency stack. |
| VisiCut 2.1 allows stack consumption via an XML document with nested set elements, as demonstrated by a java.util.HashMap StackOverflowError when reference='../../../set/set[2]' is used, aka an "insecure deserialization" issue. |
| An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file. |
| An issue in the anchors subparser of Showdownjs versions <= 2.1.0 could allow a remote attacker to cause denial of service conditions.
|
| orjson.loads in orjson before 3.9.15 does not limit recursion for deeply nested JSON documents. |
| MongoDB Server may allow upsert operations retried within a transaction to violate unique index constraints, potentially causing an invariant failure and server crash during commit. This issue may be triggered by improper WriteUnitOfWork state management. This issue affects MongoDB Server v6.0 versions prior to 6.0.25, MongoDB Server v7.0 versions prior to 7.0.22 and MongoDB Server v8.0 versions prior to 8.0.12 |
| MongoDB Server may be susceptible to stack overflow due to JSON parsing mechanism, where specifically crafted JSON inputs may induce unwarranted levels of recursion, resulting in excessive stack space consumption. Such inputs can lead to a stack overflow that causes the server to crash which could occur pre-authorisation. This issue affects MongoDB Server v7.0 versions prior to 7.0.17 and MongoDB Server v8.0 versions prior to 8.0.5.
The same issue affects MongoDB Server v6.0 versions prior to 6.0.21, but an attacker can only induce denial of service after authenticating. |
| XGrammar is an open-source library for efficient, flexible, and portable structured generation. Prior to version 0.1.21, XGrammar has an infinite recursion issue in the grammar. This issue has been resolved in version 0.1.21. |
| Wasmtime is a runtime for WebAssembly. Prior to versions 24.0.4, 33.0.2, and 34.0.2, a bug in Wasmtime's implementation of the WASIp1 set of import functions can lead to a WebAssembly guest inducing a panic in the host (embedder). The specific bug is triggered by calling `path_open` after calling `fd_renumber` with either two equal argument values or a second argument being equal to a previously-closed file descriptor number value. The corrupt state introduced in `fd_renumber` will lead to the subsequent opening of a file descriptor to panic. This panic cannot introduce memory unsafety or allow WebAssembly to break outside of its sandbox, however. There is no possible heap corruption or memory unsafety from this panic. This bug is in the implementation of Wasmtime's `wasmtime-wasi` crate which provides an implementation of WASIp1. The bug requires a specially crafted call to `fd_renumber` in addition to the ability to open a subsequent file descriptor. Opening a second file descriptor is only possible when a preopened directory was provided to the guest, and this is common amongst embeddings. A panic in the host is considered a denial-of-service vector for WebAssembly embedders and is thus a security issue in Wasmtime. This bug does not affect WASIp2 and embedders using components. In accordance with Wasmtime's release process, patch releases are available as 24.0.4, 33.0.2, and 34.0.2. Users of other release of Wasmtime are recommended to move to a supported release of Wasmtime. Embedders who are using components or are not providing guest access to create more file descriptors (e.g. via a preopened filesystem directory) are not affected by this issue. Otherwise, there is no workaround at this time, and affected embeddings are recommended to update to a patched version which will not cause a panic in the host. |
| Wasmtime is a fast and secure runtime for WebAssembly. Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript digits, and through them gain access peripheral devices connected to the computer, or network resources mapped to those devices. This can include modems, printers, network printers, and any other device connected to a serial or parallel port, including emulated USB serial ports. Patch releases for Wasmtime have been issued as 24.0.2, 25.0.3, and 26.0.1. Users of Wasmtime 23.0.x and prior are recommended to upgrade to one of these patched versions. There are no known workarounds for this issue. Affected Windows users are recommended to upgrade. |
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions envoy does not properly handle http 1.1 non-101 1xx responses. This can lead to downstream failures in networked devices. This issue has been addressed in versions 1.31.5 and 1.32.3. Users are advised to upgrade. There are no known workarounds for this issue. |
| Envoy is a cloud-native high-performance edge/middle/service proxy. In affected versions `sendOverloadError` is going to assume the active request exists when `envoy.load_shed_points.http1_server_abort_dispatch` is configured. If `active_request` is nullptr, only onMessageBeginImpl() is called. However, the `onMessageBeginImpl` will directly return ok status if the stream is already reset leading to the nullptr reference. The downstream reset can actually happen during the H/2 upstream reset. As a result envoy may crash. This issue has been addressed in releases 1.32.3, 1.31.5, 1.30.9, and 1.29.12. Users are advised to upgrade. Users unable to upgrade may disable `http1_server_abort_dispatch` load shed point and/or use a high threshold. |
| Helm is a package manager for Charts for Kubernetes. A JSON Schema file within a chart can be crafted with a deeply nested chain of references, leading to parser recursion that can exceed the stack size limit and trigger a stack overflow. This issue has been resolved in Helm v3.17.3. |
| KaTeX is a JavaScript library for TeX math rendering on the web. KaTeX users who render untrusted mathematical expressions could encounter malicious input using `\def` or `\newcommand` that causes a near-infinite loop, despite setting `maxExpand` to avoid such loops. KaTeX supports an option named maxExpand which aims to prevent infinitely recursive macros from consuming all available memory and/or triggering a stack overflow error. Unfortunately, support for "Unicode (sub|super)script characters" allows an attacker to bypass this limit. Each sub/superscript group instantiated a separate Parser with its own limit on macro executions, without inheriting the current count of macro executions from its parent. This has been corrected in KaTeX v0.16.10. |
| Envoy is a cloud-native high-performance edge/middle/service proxy. When additional address are not ip addresses, then the Happy Eyeballs sorting algorithm will crash in data plane. This issue has been addressed in releases 1.32.2, 1.31.4, and 1.30.8. Users are advised to upgrade. Users unable to upgrade may disable Happy Eyeballs and/or change the IP configuration. |
| Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1.
|
| Directus is a real-time API and App dashboard for managing SQL database content. Starting in version 10.10.0 and prior to version 11.5.0, a suspended user can use the token generated in session auth mode to access the API despite their status. This happens because there is a check missing in `verifySessionJWT` to verify that a user is actually still active and allowed to access the API. One can extract the session token obtained by, e.g. login in to the app while still active and then, after the user has been suspended continue to use that token until it expires. Version 11.5.0 patches the issue. |
| btcd is an alternative full node bitcoin implementation written in Go (golang). The btcd Bitcoin client (versions 0.10 to 0.24) did not correctly re-implement Bitcoin Core's "FindAndDelete()" functionality. This logic is consensus-critical: the difference in behavior with the other Bitcoin clients can lead to btcd clients accepting an invalid Bitcoin block (or rejecting a valid one). This consensus failure can be leveraged to cause a chain split (accepting an invalid Bitcoin block) or be exploited to DoS the btcd nodes (rejecting a valid Bitcoin block). An attacker can create a standard transaction where FindAndDelete doesn't return a match but removeOpCodeByData does making btcd get a different sighash, leading to a chain split. Importantly, this vulnerability can be exploited remotely by any Bitcoin user and does not require any hash power. This is because the difference in behavior can be triggered by a "standard" Bitcoin transaction, that is a transaction which gets relayed through the P2P network before it gets included in a Bitcoin block. `removeOpcodeByData(script []byte, dataToRemove []byte)` removes any data pushes from `script` that contain `dataToRemove`. However, `FindAndDelete` only removes exact matches. So for example, with `script = "<data> <data||foo>"` and `dataToRemove = "data"` btcd will remove both data pushes but Bitcoin Core's `FindAndDelete` only removes the first `<data>` push. This has been patched in btcd version v0.24.2. Users are advised to upgrade. There are no known workarounds for this issue. |
