| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| There is a buffer overflow vulnerability in the underlying Utility daemon that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba's access point management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.
|
| Horner Automation Cscape contains a memory corruption vulnerability, which
could allow an attacker to disclose information and execute arbitrary
code. |
| A flaw was found in the OpenJPEG project. A heap buffer overflow condition may be triggered when certain options are specified while using the opj_decompress utility. This can lead to an application crash or other undefined behavior. |
| KV Studio versions 12.23 and prior contain a stack-based buffer overflow vulnerability. If the product uses a specially crafted file, arbitrary code may be executed on the affected product. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| Out-of-bounds Read in Shelly Pro 3EM (before v1.4.4) allows Overread Buffers. |
| Johnson Controls iSTAR Configuration Utility (ICU) has Stack-based Buffer Overflow vulnerability. This issue affects iSTAR Configuration Utility (ICU) version 6.9.7 and prior. Successful exploitation of this vulnerability could result in failure within the operating system of the machine hosting the ICU tool. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix out of bounds memory read error in symlink repair
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that. |
| The webserver is vulnerable to a denial of service condition. An unauthenticated remote attacker can craft a special GET request with an over-long content-length to trigger the issue without affecting the core functionality. |
| Buffer Overflow vulnerability in CDATA FD614GS3-R850 V3.2.7_P161006 (Build.0333.250211) allows an attacker to execute arbitrary code via the node_mac, node_opt, opt_param, and domainblk parameters of the mesh_node_config and domiainblk_config modules |
| DPA countermeasures are unavailable for ECDH key agreement and EdDSA signing operations on Curve25519 and Curve448 on all Series 2 modules and SoCs due to a lack of hardware and software support. A successful DPA attack may result in exposure of confidential information. The best practice is to use the impacted crypto curves and operations with ephemeral keys to reduce the number of DPA traces that can be collected. |
| mmstu.c in VideoLAN VLC media player before 3.0.22 allows an out-of-bounds read and denial of service via a crafted 0x01 response from an MMS server. |
| Buffer Overflow vulnerability in osrg gobgp commit 419c50dfac578daa4d11256904d0dc182f1a9b22 allows a remote attacker to cause a denial of service via the handlingError function in pkg/server/fsm.go. |
| Digital Music Pad v8.2.3.3.4 contains a stack-based buffer overflow vulnerability in its playlist file parser. When opening a .pls file containing an excessively long string in the File1 field, the application fails to properly validate input length, resulting in corruption of the Structured Exception Handler (SEH) on the stack. This flaw may allow an attacker to control execution flow when the file is opened, potentially leading to arbitrary code execution. |
|
RoboDK v5.5.4
is vulnerable to heap-based buffer overflow while processing a specific project file. The resulting memory corruption may crash the application.
|
| FTPPad <= 1.2.0 contains a stack-based buffer overflow vulnerability in its FTP directory listing parser. When the client connects to an FTP server and receives a crafted response to a LIST command containing an excessively long directory and filename, the application fails to properly validate input length. This results in a buffer overflow that overwrites the saved Extended Instruction Pointer (EIP), allowing remote attackers to execute arbitrary code. |
| Insufficient input validation in the ABL may allow a privileged
attacker with access to the BIOS menu or UEFI shell to tamper with the
structure headers in SPI ROM causing an out of bounds memory read and write,
potentially resulting in memory corruption or denial of service. |
| Frigate Professional 3.36.0.9 contains a local buffer overflow vulnerability in the 'Find Computer' feature that allows attackers to execute arbitrary code by overflowing the computer name input field. Attackers can craft a malicious payload that triggers a buffer overflow, enabling code execution and launching calculator as a proof of concept. |
| LeapFTP < 3.1.x contains a stack-based buffer overflow vulnerability in its FTP client parser. When the client receives a directory listing containing a filename longer than 528 bytes, the application fails to properly bound-check the input and overwrites the Structured Exception Handler (SEH) chain. This allows an attacker operating a malicious FTP server to execute arbitrary code on the victim’s machine when the file is listed or downloaded. |
| FileWrangler <= 5.30 suffers from a stack-based buffer overflow vulnerability when parsing directory listings from an FTP server. A malicious server can send an overlong folder name in response to a LIST command, triggering memory corruption during client-side rendering. Exploitation requires passive user interaction—simply connecting to the server—without further input. Successful exploitation may lead to arbitrary code execution. |
