| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do not include stack ptr register in precision backtracking bookkeeping
Yi Lai reported an issue ([1]) where the following warning appears
in kernel dmesg:
[ 60.643604] verifier backtracking bug
[ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10
[ 60.648428] Modules linked in: bpf_testmod(OE)
[ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full)
[ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10
[ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04
01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ...
[ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246
[ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000
[ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff
[ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a
[ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8
[ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001
[ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000
[ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0
[ 60.691623] Call Trace:
[ 60.692821] <TASK>
[ 60.693960] ? __pfx_verbose+0x10/0x10
[ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10
[ 60.697495] check_cond_jmp_op+0x16f7/0x39b0
[ 60.699237] do_check+0x58fa/0xab10
...
Further analysis shows the warning is at line 4302 as below:
4294 /* static subprog call instruction, which
4295 * means that we are exiting current subprog,
4296 * so only r1-r5 could be still requested as
4297 * precise, r0 and r6-r10 or any stack slot in
4298 * the current frame should be zero by now
4299 */
4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) {
4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt));
4302 WARN_ONCE(1, "verifier backtracking bug");
4303 return -EFAULT;
4304 }
With the below test (also in the next patch):
__used __naked static void __bpf_jmp_r10(void)
{
asm volatile (
"r2 = 2314885393468386424 ll;"
"goto +0;"
"if r2 <= r10 goto +3;"
"if r1 >= -1835016 goto +0;"
"if r2 <= 8 goto +0;"
"if r3 <= 0 goto +0;"
"exit;"
::: __clobber_all);
}
SEC("?raw_tp")
__naked void bpf_jmp_r10(void)
{
asm volatile (
"r3 = 0 ll;"
"call __bpf_jmp_r10;"
"r0 = 0;"
"exit;"
::: __clobber_all);
}
The following is the verifier failure log:
0: (18) r3 = 0x0 ; R3_w=0
2: (85) call pc+2
caller:
R10=fp0
callee:
frame1: R1=ctx() R3_w=0 R10=fp0
5: frame1: R1=ctx() R3_w=0 R10=fp0
; asm volatile (" \ @ verifier_precision.c:184
5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78
7: (05) goto pc+0
8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0
9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx()
10: (b5) if r2 <= 0x8 goto pc+0
mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1
mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0
mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3
mark_preci
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister().
syzbot reported a warning below during atm_dev_register(). [0]
Before creating a new device and procfs/sysfs for it, atm_dev_register()
looks up a duplicated device by __atm_dev_lookup(). These operations are
done under atm_dev_mutex.
However, when removing a device in atm_dev_deregister(), it releases the
mutex just after removing the device from the list that __atm_dev_lookup()
iterates over.
So, there will be a small race window where the device does not exist on
the device list but procfs/sysfs are still not removed, triggering the
splat.
Let's hold the mutex until procfs/sysfs are removed in
atm_dev_deregister().
[0]:
proc_dir_entry 'atm/atmtcp:0' already registered
WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377
Modules linked in:
CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377
Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48
RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248
RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001
RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140
R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444
FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_create_data+0xbe/0x110 fs/proc/generic.c:585
atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361
atm_dev_register+0x46d/0x890 net/atm/resources.c:113
atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369
atmtcp_attach drivers/atm/atmtcp.c:403 [inline]
atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464
do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159
sock_do_ioctl+0x115/0x280 net/socket.c:1190
sock_ioctl+0x227/0x6b0 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f38b3b74459
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459
RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005
RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac
R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf_map_lookup_percpu_elem() helper is also available for sleepable bpf
program. When BPF JIT is disabled or under 32-bit host,
bpf_map_lookup_percpu_elem() will not be inlined. Using it in a
sleepable bpf program will trigger the warning in
bpf_map_lookup_percpu_elem(), because the bpf program only holds
rcu_read_lock_trace lock. Therefore, add the missed check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof()
when resizing hashtable because __GFP_NOWARN is unset.
Similar to:
b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX") |
| In the Linux kernel, the following vulnerability has been resolved:
atm: Revert atm_account_tx() if copy_from_iter_full() fails.
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: Discard stale CPU state when handling SME traps
The logic for handling SME traps manipulates saved FPSIMD/SVE/SME state
incorrectly, and a race with preemption can result in a task having
TIF_SME set and TIF_FOREIGN_FPSTATE clear even though the live CPU state
is stale (e.g. with SME traps enabled). This can result in warnings from
do_sme_acc() where SME traps are not expected while TIF_SME is set:
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
This is very similar to the SVE issue we fixed in commit:
751ecf6afd6568ad ("arm64/sve: Discard stale CPU state when handling SVE traps")
The race can occur when the SME trap handler is preempted before and
after manipulating the saved FPSIMD/SVE/SME state, starting and ending on
the same CPU, e.g.
| void do_sme_acc(unsigned long esr, struct pt_regs *regs)
| {
| // Trap on CPU 0 with TIF_SME clear, SME traps enabled
| // task->fpsimd_cpu is 0.
| // per_cpu_ptr(&fpsimd_last_state, 0) is task.
|
| ...
|
| // Preempted; migrated from CPU 0 to CPU 1.
| // TIF_FOREIGN_FPSTATE is set.
|
| get_cpu_fpsimd_context();
|
| /* With TIF_SME userspace shouldn't generate any traps */
| if (test_and_set_thread_flag(TIF_SME))
| WARN_ON(1);
|
| if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
| unsigned long vq_minus_one =
| sve_vq_from_vl(task_get_sme_vl(current)) - 1;
| sme_set_vq(vq_minus_one);
|
| fpsimd_bind_task_to_cpu();
| }
|
| put_cpu_fpsimd_context();
|
| // Preempted; migrated from CPU 1 to CPU 0.
| // task->fpsimd_cpu is still 0
| // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then:
| // - Stale HW state is reused (with SME traps enabled)
| // - TIF_FOREIGN_FPSTATE is cleared
| // - A return to userspace skips HW state restore
| }
Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set
by calling fpsimd_flush_task_state() to detach from the saved CPU
state. This ensures that a subsequent context switch will not reuse the
stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the
new state to be reloaded from memory prior to a return to userspace.
Note: this was originallly posted as [1].
[ Rutland: rewrite commit message ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm: limit swapping tables for devices with zone write plugs
dm_revalidate_zones() only allowed new or previously unzoned devices to
call blk_revalidate_disk_zones(). If the device was already zoned,
disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones()
returned without doing any work. This would make the zoned settings for
the device not match the new table. If the device had zone write plug
resources, it could run into errors like bdev_zone_is_seq() reading
invalid memory because disk->conv_zones_bitmap was the wrong size.
If the device doesn't have any zone write plug resources, calling
blk_revalidate_disk_zones() will always correctly update device. If
blk_revalidate_disk_zones() fails, it can still overwrite or clear the
current disk->nr_zones value. In this case, DM must restore the previous
value of disk->nr_zones, so that the zoned settings will continue to
match the previous value that it fell back to.
If the device already has zone write plug resources,
blk_revalidate_disk_zones() will not correctly update them, if it is
called for arbitrary zoned device changes. Since there is not much need
for this ability, the easiest solution is to disallow any table reloads
that change the zoned settings, for devices that already have zone plug
resources. Specifically, if a device already has zone plug resources
allocated, it can only switch to another zoned table that also emulates
zone append. Also, it cannot change the device size or the zone size. A
device can switch to an error target. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands
In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed
in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data
(i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes).
Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()'
to do 'skb_put_data()' from an area beyond the one actually passed to
'mgmt_hci_cmd_sync()'. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring EST
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill timer properly at removal
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken
A SCO connection without the proper voice_setting can cause
the controller to lock up. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: don't warn when if there is a FW error
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Check return value from memblock_phys_alloc_range()
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Fix segfault on registration when rseq_cs is non-zero
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix unconditional IO throttle caused by REQ_PREFLUSH
When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().
An example from v5.4, similar problem also exists in upstream:
crash> bt 2091206
PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0"
#0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
#2 [ffff800084a2f880] schedule at ffff800040bfa4b4
#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
#8 [ffff800084a2fa60] generic_make_request at ffff800040570138
#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
#18 [ffff800084a2fe70] kthread at ffff800040118de4
After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.
Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: pktgen: fix access outside of user given buffer in pktgen_thread_write()
Honour the user given buffer size for the strn_len() calls (otherwise
strn_len() will access memory outside of the user given buffer). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Fix system hang during S4 resume with FRED enabled
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: set device_caps for 417
The video_device for the MPEG encoder did not set device_caps.
Add this, otherwise the video device can't be registered (you get a
WARN_ON instead).
Not seen before since currently 417 support is disabled, but I found
this while experimenting with it. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: mctrl_gpio: split disable_ms into sync and no_sync APIs
The following splat has been observed on a SAMA5D27 platform using
atmel_serial:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74
Hardware name: Atmel SAMA5
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __might_resched+0x38c/0x598
__might_resched from disable_irq+0x1c/0x48
disable_irq from mctrl_gpio_disable_ms+0x74/0xc0
mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4
atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8
atmel_set_termios from uart_change_line_settings+0x15c/0x994
uart_change_line_settings from uart_set_termios+0x2b0/0x668
uart_set_termios from tty_set_termios+0x600/0x8ec
tty_set_termios from ttyport_set_flow_control+0x188/0x1e0
ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]
wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]
hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]
hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]
hci_power_on [bluetooth] from process_one_work+0x998/0x1a38
process_one_work from worker_thread+0x6e0/0xfb4
worker_thread from kthread+0x3d4/0x484
kthread from ret_from_fork+0x14/0x28
This warning is emitted when trying to toggle, at the highest level,
some flow control (with serdev_device_set_flow_control) in a device
driver. At the lowest level, the atmel_serial driver is using
serial_mctrl_gpio lib to enable/disable the corresponding IRQs
accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to
disable_irq (called in mctrl_gpio_disable_ms) being possibly called in
some atomic context (some tty drivers perform modem lines configuration
in regions protected by port lock).
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one
and a blocking one. Replace mctrl_gpio_disable_ms calls with the
relevant version depending on whether the call is protected by some port
lock. |
