| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: prevent create failure bitmap UAF
llbitmap_create() publishes mddev->bitmap before reading the bitmap
superblock. This is needed because llbitmap_read_sb() can initialize a
new bitmap and flush it through helpers that use mddev->bitmap.
If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex
and freed llbitmap before clearing mddev->bitmap. Readers such as
/proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable
while collecting bitmap stats, so they could observe the stale pointer
after the failed create path released the mutex.
Clear mddev->bitmap while still holding bitmap_info.mutex, then free the
failed llbitmap after dropping the mutex. This makes mutex-protected
readers see either a live bitmap or no bitmap. |
| In the Linux kernel, the following vulnerability has been resolved:
md: wait for behind writes before destroying bitmap
__md_stop() destroyed the bitmap before calling mddev_detach(). That made
mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap
was already disconnected from mddev.
This was still safe for the legacy bitmap because bitmap_destroy() waits
for behind writes itself. llbitmap keeps that wait in its
->wait_behind_writes() operation instead, while ->destroy() tears down the
llbitmap storage. With the old ordering, RAID1 behind-write completions
could still run after llbitmap storage had been freed.
Call mddev_detach() before md_bitmap_destroy() so the common detach path
can wait for behind writes while the bitmap is still alive. Only destroy
the bitmap after those users are gone. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero, and the unbind thread blocks on wait_for_completion(&released).
When the user thread closes the file descriptor, it drops the final
reference, invoking the device release callback release_card_device(),
which calls snd_card_do_free(). snd_card_do_free() performs cleanup and
calls complete(card->release_completion). This wakes up the unbind thread,
which returns from snd_card_free() and __snd_card_release(). The devres
core then immediately frees the memory block containing the snd_card
structure.
Meanwhile, the user thread continues execution in snd_card_do_free() and
evaluates `if (!card->managed)`. It reads the `managed` boolean from the
snd_card structure that was just freed by the unbind thread, triggering a
KASAN use-after-free.
Fix this by caching the value of card->managed in a local variable before
calling complete(). This ensures that the card pointer is not dereferenced
after the unbind thread has been woken up and potentially freed the card.
BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604
[inline]
BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0
sound/core/init.c:153
Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description+0x55/0x1e0 mm/kasan/report.c:378
print_report+0x58/0x70 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
snd_card_do_free sound/core/init.c:604 [inline]
release_card_device+0x1ab/0x1b0 sound/core/init.c:153
device_release+0xc4/0x1f0 drivers/base/core.c:-1
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x222/0x550 lib/kobject.c:737
snd_card_file_remove+0x331/0x390 sound/core/init.c:1125
snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986
__fput+0x418/0xa50 fs/file_table.c:512
fput_close_sync+0x11f/0x240 fs/file_table.c:617
__do_sys_close fs/open.c:1511 [inline]
__se_sys_close fs/open.c:1496 [inline]
__x64_sys_close+0x7e/0x110 fs/open.c:1496
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: release pending child sockets outside the handler lock
smbdirect_socket_destroy() releases the listener's pending/ready child
sockets while still holding the listener's handler lock, the
&id_priv->handler_mutex taken via rdma_lock_handler(), not
sc->listen.lock, and before the listener's own rdma_destroy_id().
That ordering has one real consequence and one cosmetic one.
The real one: smbdirect_socket_release() drops the child's last
reference, which destroys the child's cm_id. Doing that before the
listener's rdma_destroy_id() lets _cma_cancel_listens(), running from
the listener's _destroy_id(), walk an already freed child id_priv,
which KASAN catches as a slab-use-after-free during listener shutdown:
[ 4758.909130] BUG: KASAN: slab-use-after-free in __mutex_lock+0x1469/0x1560
[ 4758.911450] Read of size 1 at addr ffff88821c381db4 by task ksmbd.control/1652
[ 4758.913262] Call Trace:
[ 4758.913267] <TASK>
[ 4758.913299] __mutex_lock+0x1469/0x1560
[ 4758.913408] _cma_cancel_listens+0x312/0x3b0
[ 4758.913413] _destroy_id+0x363/0xee0
[ 4758.913417] smbdirect_socket_destroy_sync+0x17d5/0x2440
[ 4758.913443] smbdirect_socket_release+0x124/0x230
[ 4758.913451] ksmbd_rdma_stop_listening+0x9f/0x190
[ 4758.913457] ksmbd_conn_transport_destroy+0x65/0x3c0
[ 4758.913463] kill_server_store+0x1fb/0x2b0
[ 4758.913501] kernfs_fop_write_iter+0x349/0x4d0
[ 4758.913507] vfs_write+0x5e7/0xc70
[ 4758.913528] ksys_write+0x12a/0x210
[ 4758.913541] do_syscall_64+0x135/0x460
[ 4758.913555] entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cosmetic one: releasing a child recurses into
smbdirect_socket_destroy(), which takes the child's own
rdma_lock_handler() lock nested under the listener's. The listener's
and the child's cm_id are always different instances, so this cannot
deadlock for real; the CM core itself nests a new connection id's
handler_mutex under the listening id's in cma_ib_req_handler(). But
lockdep only sees one lock class, reports possible recursive locking,
and then disables itself, hiding real locking bugs for the rest of the
run:
[ 2424.579653] WARNING: possible recursive locking detected
[ 2424.581180] 7.1.0-next-20260623+ #89 Not tainted
[ 2424.582548] --------------------------------------------
[ 2424.584500] ksmbd.control/8854 is trying to acquire lock:
[ 2424.586817] ffff888102303c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440
[ 2424.590590]
[ 2424.590590] but task is already holding lock:
[ 2424.591601] ffff888102046c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440
[ 2424.594178]
[ 2424.594178] other info that might help us debug this:
[ 2424.596634] Possible unsafe locking scenario:
[ 2424.596634]
[ 2424.598841] CPU0
[ 2424.599765] ----
[ 2424.600695] lock(&id_priv->handler_mutex);
[ 2424.601836] lock(&id_priv->handler_mutex);
[ 2424.602590]
[ 2424.602590] *** DEADLOCK ***
[ 2424.602590]
[ 2424.604512] May be due to missing lock nesting notation
Splice the pending/ready children onto a local list under the
listener's listen.lock, while the handler lock is held so a concurrent
CM CONNECT_REQUEST cannot add more, but defer the actual
smbdirect_socket_release() calls until after the listener's cm_id has
been destroyed and its handler lock dropped. The children are
independent sockets whose teardown needs neither the listener's
handler lock nor its cm_id.
Found with ksmbdzzer [2], a KSMBD fuzzer that drives libFuzzer with a
kcov-dataflow [1] coverage vector: it folds each instrumented
comparison/argument's runtime operand value together with its PC (the
default arm mixes them as pc⊕val) so that a new operand value at a known
site counts as new coverage.
[1] https://lwn.net/Articles/1077606/
[2] https://github.com/yskzalloc/kcov-dataflow |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: update queue NAPI association on queue reset
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mtpav: shut down output timer before card teardown
snd_mtpav_output_timer() rearms chip->timer while holding
chip->spinlock and accesses the card-private mtpav state.
snd_mtpav_free() currently takes the same lock and calls
timer_delete() when the timer is active. This only removes a
pending timer; it does not wait for a callback that is already
running and does not prevent the callback from rearming the timer.
A callback running on another CPU can therefore continue after
snd_mtpav_free() releases the lock and access the card-private
state while the card is being torn down. It can also rearm the
timer after timer_delete() has returned.
Call timer_shutdown_sync() without holding chip->spinlock. This
waits for any running callback to finish and prevents further
rearming before the card-private mtpav state is released. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path. |
| A heap-use-after-free vulnerability exists in H5T__conv_f_f() in src/H5Tconv.c in HDF5 before 1.14.2. When converting a compound datatype containing floating-point members during a dataset read, a temporary buffer allocated with calloc() is freed and subsequently read from within the same conversion routine. An attacker who can supply a crafted HDF5 file containing a specially constructed compound datatype can trigger the use-after-free when the file is parsed by an application that reads the affected dataset, such as h5dump. This can result in a crash and, depending on heap layout and allocator behavior, may be exploitable for further memory corruption up to remote code execution. |
| A vulnerability was identified in GPAC 26.08-DEV. The impacted element is the function gf_sg_command_del of the file src/scenegraph/commands.c of the component BIFS Handler. The manipulation leads to use after free. The attack needs to be performed locally. The exploit is publicly available and might be used. Upgrading to version abi-16.24 is sufficient to resolve this issue. The identifier of the patch is e34f4ba349d55cd1849f0bcf4cf46552732e2db7. It is suggested to upgrade the affected component. |
| Use After Free in GitHub repository vim/vim prior to 9.0.1840. |
| Use after free in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| An issue was discovered in l2cap_sock_release in net/bluetooth/l2cap_sock.c in the Linux kernel before 6.4.10. There is a use-after-free because the children of an sk are mishandled. |
| A flaw use after free in the Linux kernel integrated infrared receiver/transceiver driver was found in the way user detaching rc device. A local user could use this flaw to crash the system or potentially escalate their privileges on the system. |
| Use after free in Internals in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Use-after-free in the DOM: Streams component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Use-after-free in the Networking component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
| Use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 156, Firefox ESR 115.41, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. |
