| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: fix deadlock on shared proxy's parent removal
Commit 710abda58055 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation. |
| @fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: fix indefinite fence wait during GPU reset
pre_reset only force-completes fences of MAPPED queues. A queue in any
other state (e.g. mid-eviction) keeps its last_fence pending; after a
GPU reset that fence never signals, so the eviction/suspend worker and
process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and
wedge the machine:
INFO: task kworker/6:28 blocked for more than 120 seconds.
Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
Call Trace:
dma_fence_wait_timeout+0x7e/0x130
amdgpu_userq_evict+0x67/0x140 [amdgpu]
amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu]
process_scheduled_works+0xa6/0x420
Force-complete every queue's fence regardless of state. The unmap and
mark-hung step stays gated on MAPPED, since unmapping a queue that is
not mapped is invalid.
(cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0) |
| In the Linux kernel, the following vulnerability has been resolved:
net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM
Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to
dev->lltx"), NETIF_F_LLTX was set unconditionally in both
__gre_tunnel_init() and ip6gre_tnl_init_features() alongside
GRE_FEATURES:
dev->features |= GRE_FEATURES | NETIF_F_LLTX;
When that commit converted NETIF_F_LLTX to the dev->lltx flag, it
placed 'dev->lltx = true' after the SEQ/CSUM early returns instead
of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or
CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition
around their ndo_start_xmit. Since GRE xmit re-enters the stack via
ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the
underlay device.
CPU0 CPU1
---- ----
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
Fix by moving dev->lltx = true before the early returns in both
functions, restoring the original unconditional behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix ISM dc_lock deadlock during suspend
[Why]
System hang observed during suspend/resume while video is playing.
amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM
delayed work via disable_delayed_work_sync(). The work handlers
themselves take dc_lock, producing an ABBA deadlock when a worker is
in flight at suspend time.
[How]
Split the disable path into two phases with opposite locking
contracts:
1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold
dc_lock.
2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM
back to FULL_POWER_RUNNING, must hold dc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 is vulnerable to a denial of service attack. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix IRQ unsafe locking in gdom allocation
Lockdep complains:
[ 259.410489] =====================================================
[ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
[ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted
[ 259.429718] -----------------------------------------------------
[ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0
[ 259.454485]
and this task is already holding:
[ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60
[ 259.470408] which would create a new lock dependency:
[ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.483615]
but this new dependency connects a HARDIRQ-irq-safe lock:
[ 259.492447] (&domain->lock){-.-.}-{3:3}
[ 259.492449]
... which became HARDIRQ-irq-safe at:
[ 259.503705] lock_acquire+0xb6/0x2e0
[ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60
[ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50
[ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0
[ 259.523534] __iommu_dma_unmap+0xc2/0x140
[ 259.528100] iommu_dma_unmap_phys+0x55/0xc0
[ 259.532863] dma_unmap_phys+0x274/0x2e0
[ 259.537238] dma_unmap_page_attrs+0x17/0x30
[ 259.542000] nvme_unmap_data+0x13e/0x280
[ 259.546473] nvme_pci_complete_batch+0x45/0x70
[ 259.551524] nvme_irq+0x83/0x90
[ 259.555123] __handle_irq_event_percpu+0x92/0x360
[ 259.560466] handle_irq_event+0x39/0x80
[ 259.564841] handle_edge_irq+0xb2/0x1a0
[ 259.569214] __common_interrupt+0x4e/0x130
[ 259.573882] common_interrupt+0x88/0xa0
[ 259.578256] asm_common_interrupt+0x27/0x40
[ 259.583019] cpuidle_enter_state+0x119/0x5d0
[ 259.587877] cpuidle_enter+0x2e/0x50
[ 259.591962] do_idle+0x153/0x2c0
[ 259.595657] cpu_startup_entry+0x29/0x30
[ 259.600128] start_secondary+0x118/0x150
[ 259.604601] common_startup_64+0x13e/0x141
[ 259.609266]
to a HARDIRQ-irq-unsafe lock:
[ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3}
[ 259.615386]
... which became HARDIRQ-irq-unsafe at:
[ 259.627039] ...
[ 259.627039] lock_acquire+0xb6/0x2e0
[ 259.633071] _raw_spin_lock+0x2f/0x50
[ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0
[ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd]
[ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd]
[ 259.654547] __x64_sys_ioctl+0x9d/0xf0
...
Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the
flush, switch the allocation side in gdom_info_load_or_alloc_locked() to
HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue,
so switch that path to HARDIRQ-safe locking as well. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Report dying CPU to RCU in stop_this_cpu()
This is a port of MIPS commit 9f3f3bdc6d9dac1 ("MIPS: smp: report dying
CPU to RCU in stop_this_cpu()"). smp_send_stop() parks all secondary
CPUs in stop_this_cpu(). And the function marks the CPU offline for the
scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps
expecting a quiescent state from CPUs that are now spinning forever with
interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. However, since commit
91840be8f710370 ("irq_work: Fix use-after-free in irq_work_single() on
PREEMPT_RT"), irq_work_sync() calls synchronize_rcu() on architectures
without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt()
returns false. Any irq_work_sync() issued in the reboot/shutdown/halt
path after smp_send_stop() then blocks on a grace period that can never
complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue needs some hacks to reproduce, and it was not noticed on
LoongArch because arch_irq_work_has_interrupt() usually returns true.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring
the generic CPU-hotplug offline path, so RCU stops waiting on the parked
CPUs and grace periods can still complete. LoongArch shuts down all CPUs
here without going through the CPU-hotplug mechanism, so this report is
not otherwise issued. |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. |
| In the Synopsys DesignWare I2C driver (drivers/i2c/i2c_dw.c) operating in target/slave mode, the rx_full interrupt handler gates the write_requested() callback on dw->state != CMD_SEND, and dw->state is only reset to READY on a STOP interrupt. The START_DET interrupt, whose handler in i2c_dw_slave_read_clear_intr_bits() would reset the state on every (re)START, was never added to the enabled interrupt mask in i2c_dw_slave_register(), so that recovery path was dead code.
As a result, if the STOP interrupt is lost (bus glitch/reset, or a concurrent master driving STOP) or the bus master issues a legal WRITE-repeated-START-WRITE sequence with the same direction, the driver remains in CMD_SEND permanently and never invokes write_requested() again for the life of the target.
An I2C master on the same physical bus can deliberately trigger this, causing the I2C target function to malfunction for all subsequent write transactions and desynchronizing consumer framing state (e.g. MCTP-over-I2C), a recoverable-by-reset denial of service of the target peripheral.
The fix unmasks START_DET so the state is reset at every bus (re)START. Impact is availability-only over a local board-level bus; no memory corruption results in the in-tree consumer, whose per-byte buffer write is independently bounds-checked. |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: Balance RCU calls in drbd_adm_dump_devices()
Make drbd_adm_dump_devices() call rcu_read_lock() before
rcu_read_unlock() is called. This has been detected by the Clang
thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix af_unix iter deadlock
bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast
path and the iter prog attempts to update a sockmap. Which ends up spinning
at sock_map_update_elem()'s bh_lock_sock():
WARNING: possible recursive locking detected
test_progs/1393 is trying to acquire lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0
but task is already holding lock:
ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(slock-AF_UNIX);
lock(slock-AF_UNIX);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by test_progs/1393:
#0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0
#1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0
#2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0
#3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00
Call Trace:
dump_stack_lvl+0x5d/0x80
print_deadlock_bug.cold+0xc0/0xce
__lock_acquire+0x130f/0x2590
lock_acquire+0x14e/0x2b0
_raw_spin_lock+0x30/0x40
sock_map_update_elem+0xdb/0x1f0
bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4
bpf_iter_run_prog+0x5b9/0xb00
bpf_iter_unix_seq_show+0x1f7/0x2e0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0x6b/0x3a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| A vulnerability in the management and VPN web servers for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to incomplete error checking when parsing an HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to a targeted web server on a device. A successful exploit could allow the attacker to cause a DoS condition when the device reloads. |
| A vulnerability in ICMPv6 inspection when configured with the Snort 2 detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the CPU of an affected device to spike to 100 percent, which could stop all traffic processing and result in a denial of service (DoS) condition. FTD management traffic is not affected by this vulnerability. This vulnerability is due to improper error checking when parsing fields within the ICMPv6 header. An attacker could exploit this vulnerability by sending a crafted ICMPv6 packet through an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. Note: To recover from the DoS condition, the Snort 2 Detection Engine or the Cisco FTD device may need to be restarted. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired. |
