| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: skip expectations for confirmed conntrack
nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed
conntrack entry. However, nf_ct_ext_add() can only be called for
!nf_ct_is_confirmed().
[ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack]
[ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack]
[ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00
[ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202
[ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887
[ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440
[ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447
[ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440
[ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20
[ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000
[ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0
[ 1825.352508] Call Trace:
[ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack]
[ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct]
[ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables]
Add the ct helper extension only for unconfirmed conntrack. Skip rule
evaluation if the ct helper extension does not exist. Thus, you can
only create expectations from the first packet.
It should be possible to remove this limitation by adding a new action
to attach a generic ct helper to the first packet. Then, use this ct
helper extension from follow up packets to create the ct expectation.
While at it, add a missing check to skip the template conntrack too
and remove check for IPCT_UNTRACK which is implicit to !ct. |
| Incorrect Permission Assignment in BOSH.Utils.psm1 in BOSH-Ecosystem bosh-windows-stemcell-builder allows low-privilege authenticated users to overwrite C:\bosh\service_wrapper.exe or C:\bosh\bosh-agent.exe and gain NT AUTHORITY\SYSTEM on the next service restart or reboot. This can lead to full host control.
Affected versions: bosh-windows-stemcell-builder versions prior to v2019.98. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A malicious app may be able to gain root privileges. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A malicious app may be able to gain root privileges. |
| An incorrect default permissions vulnerability in Synology Assistant before 7.0.7-50095 allows local users to read or write arbitrary files and conduct denial-of-service during installation. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close. |
| A vulnerability has been identified in Mendix Runtime (All versions). Mendix documentation for access rules does not adequately describe the special behavior of the System.User entity, leaving developers without sufficient guidance to configure access rules securely. This documentation gap may lead application developers to unknowingly apply overly permissive access rules to System.User, resulting in unintended exposure of sensitive user data or privilege escalation within deployed Mendix applications. |
| The security fix for CVE-2025-66518 is incomplete. Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allowlist via unprefixed Spark config aliases.
This issue affects Apache Kyuubi: from 1.6.0 before 1.12.0.
Users are recommended to upgrade to version 1.12.0, which fixes the issue. |
| Incorrect default permissions issue exists in Pupsman versions prior to 3.9.0. An attacker can place a malicious executable in the installation folder, which results in arbitrary code execution with SYSTEM privilege |
| A potential insecure permissions vulnerability was reported in Legion Zone and the Lenovo App Store Windows applications, distributed exclusively in the Chinese market, that when installed on a non‑system partition, could allow a local user to execute arbitrary code. |
| CVE-2026-40952 is a privilege misconfiguration
in the Secure Access installer for the Windows client and server prior to
version 14.55. Attackers with local access to the client or server can use it
to elevate privileges to Administrator when Secure Access is installed in a
non-default location. |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. |
| Overly permissive file permissions in AWS CLI before 1.44.78 (v1) and 2.34.29 (v2) on Unix-like systems where the umask has not been configured to restrict file permissions (the default on most systems) may allow other local users on the same host to read credentials written by certain CLI subcommands (aws codeartifact login, aws iam create-virtual-mfa-device, aws deploy register).
To remediate this issue, users should upgrade to AWS CLI 1.44.78 (v1) or 2.34.29 (v2) or later. |
| Nixpkgs is a collection of software packages that can be installed with the Nix package manager. Prior to the 25.11 and 26.05 channel fixes, the NixOS module for MySQL services.mysql initializes the MySQL database in a way that allows local users, such as unprivileged web or CGI processes on the same host, to log in as the root user without a password when the service is used with mysql or percona-server. This issue is fixed in the 25.11 and 26.05. |
| SurrealDB before 1.0.1 sets default table permissions to FULL instead of NONE, allowing SELECT, CREATE, UPDATE, and DELETE operations on tables without explicit permissions. Attackers with database access or unauthenticated users on publicly exposed instances can perform unrestricted operations on unprotected tables within their authorization scope. |
| Splinterware System Scheduler Pro 5.12 contains an insecure file permissions vulnerability that allows low-privilege users to escalate privileges by modifying service executable files. Attackers can rename the WService.exe file in the installation directory and replace it with a malicious executable that executes with LocalSystem privileges when the service is triggered. |
| ZKTeco ZKBioSecurity 3.0 contains a file path manipulation vulnerability that allows attackers to access arbitrary files by modifying file paths used to retrieve local resources. Attackers can manipulate path parameters to bypass access controls and retrieve sensitive information including configuration files, source code, and protected application resources. |
