Search Results (571 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-64054 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: shaper: reject duplicate leaves in GROUP request net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES entries. When userspace supplies the same leaf handle twice, the same old-parent pointer lands twice in old_nodes[]. The cleanup loop double frees the parent. Of course the same parent may still be in old_nodes[] twice if we are moving multiple of its leaves. Note that this patch also implicitly fixes the fact that the i >= leaves_count path forgets to set ret.
CVE-2026-53294 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs.
CVE-2026-46189 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path Sashiko points out that pvrdma_uar_free() is already called within pvrdma_dealloc_ucontext(), so calling it before triggers a double free.
CVE-2026-46162 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ice: fix double free in ice_sf_eth_activate() error path When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit().
CVE-2026-43276 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] <TASK> [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026] </TASK>
CVE-2026-31759 1 Linux 1 Linux Kernel 2026-11-06 7.8 High
In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface().
CVE-2026-6843 2 Gnu, Redhat 6 Nano, Enterprise Linux, Nano and 3 more 2026-11-05 5.5 Medium
A flaw was found in nano. A local user could exploit a format string vulnerability in the `statusline()` function. By creating a directory with a name containing `printf` specifiers, the application attempts to display this name, leading to a segmentation fault (SEGV). This results in a Denial of Service (DoS) for the `nano` application.
CVE-2026-6390 1 Redhat 4 Enterprise Linux, Openshift, Openshift Container Platform and 1 more 2026-11-05 6.8 Medium
A flaw was found in GNU nano's multi-buffer error message handling. When a user opens multiple files at startup and one triggers an ALERT-level error, a specially crafted filename containing printf format specifiers can be reinterpreted. This format string vulnerability may allow an attacker to achieve stack information disclosure, cause a denial of service (crash), or potentially perform arbitrary memory writes.
CVE-2025-37933 1 Linux 1 Linux Kernel 2026-11-05 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix host hang issue during device reboot When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called.
CVE-2026-121956 1 Freerdp 1 Freerdp 2026-11-05 7.5 High
FreeRDP before 3.32.2 contains a double free in the WinPR Kerberos SSPI retrieveSomeTgt function, which installs the krb5 default realm into a target principal that has an empty realm without taking ownership of it. Unauthenticated remote clients can send a crafted NLA/CredSSP u2u TGT request whose server-name component contains '@' to corrupt the heap and crash the server process.
CVE-2026-88812 1 X.org 3 Xorg-server, Xorg-x11-server, Xwayland 2026-11-04 7.8 High
A double free in XKB SetGeometryin X.Org X Server before 21.1.25 and X Wayland before 24.1.14 could be used by attached clients to cause a crash or potentially code in the x server context.
CVE-2026-63201 1 Cesnet 1 Netopeer2 2026-11-03 N/A
Netopeer2 is a server for implementing network configuration management based on the `NETCONF` Protocol. In affected versions, a low-privileged authenticated `NETCONF` user can remotely crash `netopeer2-server` by sending a `get RPC` with an invalid `subtree filter` whose text contains format specifiers. In `src/netconf.c`, `np2srv_rpc_get_cb()` sends the invalid value through `ERR()` to `np2log_printf()`, where `vsnprintf()` first formats the message safely. In `src/log.c`, that already formatted buffer is subsequently passed to `np2log()` as the format string itself, causing `vsyslog()` to interpret attacker-controlled percent sequences and read invalid pointer arguments. The reported denial of service was confirmed on version 2.8.7 using `NETCONF`-over-SSH and AddressSanitizer; reliable remote code execution was not confirmed. `The advisory identifies 2.8.8 as patched`; repository comparisons verify the fix in public release 2.8.21. The affected/fixed boundary remains unresolved because no public 2.8.8 tag was located, which does not establish the status of an untagged 2.8.8 build.
CVE-2023-25815 3 Fedoraproject, Git For Windows Project, Redhat 7 Fedora, Git For Windows, Enterprise Linux and 4 more 2026-11-02 3.3 Low
In Git for Windows, the Windows port of Git, no localized messages are shipped with the installer. As a consequence, Git is expected not to localize messages at all, and skips the gettext initialization. However, due to a change in MINGW-packages, the `gettext()` function's implicit initialization no longer uses the runtime prefix but uses the hard-coded path `C:\mingw64\share\locale` to look for localized messages. And since any authenticated user has the permission to create folders in `C:\` (and since `C:\mingw64` does not typically exist), it is possible for low-privilege users to place fake messages in that location where `git.exe` will pick them up in version 2.40.1. This vulnerability is relatively hard to exploit and requires social engineering. For example, a legitimate message at the end of a clone could be maliciously modified to ask the user to direct their web browser to a malicious website, and the user might think that the message comes from Git and is legitimate. It does require local write access by the attacker, though, which makes this attack vector less likely. Version 2.40.1 contains a patch for this issue. Some workarounds are available. Do not work on a Windows machine with shared accounts, or alternatively create a `C:\mingw64` folder and leave it empty. Users who have administrative rights may remove the permission to create folders in `C:\`.
CVE-2026-120059 1 Postgresql 1 Psqlodbc 2026-11-02 6.8 Medium
For an updatable cursor over a table without OIDs that has an auto-increment int4 column, psqlODBC places that column's name, as reported by the server, into a printf-style format string. It later expands that string with one argument while it builds the WHERE clause of its positioned SELECT, UPDATE, and DELETE statements. A column name that contains format directives makes the driver read unrelated memory, which can crash the application or copy client memory into query text sent to the server. The name can come from a server not trusted under current SSL settings, or from any database user who can create a table that the application reads with an updatable cursor. Versions before psqlODBC 18.00.0006 are affected.
CVE-2026-15809 1 Redhat 4 Confidential Compute Attestation, Openshift, Openshift Container Platform and 1 more 2026-11-02 7.8 High
A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable.
CVE-2026-116260 1 Libimobiledevice 1 Libimobiledevice 2026-10-31 7.3 High
A weakness has been identified in libimobiledevice up to 1.4.0. This issue affects the function service_receive of the file src/afc.c of the component AFC Service. Executing a manipulation can lead to double free. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-63907 1 Linux 1 Linux Kernel 2026-10-30 7.8 High
In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label.
CVE-2026-63911 1 Linux 1 Linux Kernel 2026-10-30 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: reset runtime state when cloning SAs iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This copies runtime objects which must not be shared with the original SA, including the embedded sk_buff_head, hrtimers, spinlock, and in-flight reassembly/reorder state. If xfrm_state_migrate() fails after clone_state() but before the later init_state() call has reinitialized those fields, the cloned state can be destroyed by xfrm_state_gc_task() with list and timer state copied from the original SA. With queued packets this lets the clone splice and free skbs owned by the original IPTFS queue, leading to use-after-free and double-free reports in iptfs_destroy_state() and skb release paths. Reinitialize the clone's runtime state before publishing it through x->mode_data. Because clone_state() now publishes a destroyable mode_data object before init_state(), take the mode callback module reference there. Avoid taking it again from __iptfs_init_state() for the same object.
CVE-2026-99206 1 Linux 2 Linux, Linux Kernel 2026-10-30 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix race in discovery auth updates Separate configfs opens can concurrently update the discovery AuthMethod parameter. Both callers may free the same value in iscsi_update_param_value(), causing a double-free. Protect the lookup and replacement with the discovery TPG access lock, as used by the other TPG configfs parameter updates.
CVE-2026-98855 1 Linux 1 Linux Kernel 2026-10-30 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references.