Export limit exceeded: 401114 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401114 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80926 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in oplock break notification smb2_oplock_break_noti() reads opinfo->conn without any lock and dereferences it after two allocations which may sleep. When the durable handle owning the oplock is disconnected, session_fd_check() clears opinfo->conn and drops its conn reference under ci->m_lock, and the last ksmbd_conn_put() frees the connection. A break triggered by another connection that races with the teardown can then resurrect the freed connection: ksmbd_conn_get() is a plain atomic_inc, and the queued break work later dereferences the stale conn via ksmbd_conn_write(), a use-after-free reachable by any authenticated client holding a durable batch oplock. Thread the caller's inode into the notification path instead of taking a new reference on it. Every caller of oplock_break() already holds a live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference, in the parent lease break paths) on the inode that owns the break target's oplock list, so ci cannot be freed during the call, and its lock can be taken without dereferencing opinfo->o_fp, which a concurrent close may free. Select and pin the connection under ci->m_lock, the same lock session_fd_check() and ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent detach either loses the race to the clear or keeps the connection alive until the notification work releases it. Transfer the reference to the work item and release it on allocation failures. | ||||
| CVE-2026-80925 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vlan: fix skb_under_panic and races when toggling HW VLAN offload Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(), which dynamically changed vlandev->hard_header_len. This causes two issues: 1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2) read dev->hard_header_len without holding RTNL lock. Mutating hard_header_len dynamically under RTNL creates a data race where upper layers reserve insufficient headroom based on a stale hard_header_len, resulting in skb_under_panic when vlan_dev_hard_header() is called. 2. In addition, vlan_transfer_features() updated hard_header_len without updating header_ops, causing a mismatch between allocated headroom and header creation. Always setting dev->hard_header_len = real_dev->hard_header_len and dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally ensures: - dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len, eliminating all dynamic runtime updates and data races on hard_header_len. - Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len + real_dev->needed_headroom + VLAN_HLEN). - vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV requirements are honored. - AF_PACKET SOCK_RAW network header offsets remain correctly aligned at real_dev->hard_header_len. - vlan_header_ops is used unconditionally. Note to stable teams: Make sure to backport these commits: e16e960d55a4 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev") cef51860becd ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev") | ||||
| CVE-2026-80861 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal. | ||||
| CVE-2026-80851 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gtp: serialize PDP context updates PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp] RBP: dead000000000122 The second deletion dereferenced the poisoned hlist pprev pointer. Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a shared mutex. Keep the mutex held until the final use of a PDP context in the NEWPDP path, and keep the RCU read-side section around the complete PDP context use in the DELPDP path. | ||||
| CVE-2026-80841 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: defer vmalloc TX_RING free until skbs finish AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb page references preserve page-backed ring blocks after pg_vec is freed, but they do not preserve a vmalloc mapping. tpacket_destruct_skb() currently drops the pending reference before writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the decrement after those stores. The smp_wmb() in __packet_set_status() orders the frame stores before the decrement. Also recheck pending TX frames under pg_vec_lock before non-closing ring replacement, so a racing send cannot add a pending skb between the initial check and the ring swap. Ring allocation can produce a mixture of page-backed and vmalloc-backed blocks. Allocate deferred-work storage during TX ring setup when the first vmalloc-backed block is encountered, and keep its pointer in the pg_vec allocation header. If allocation fails, return -ENOMEM from ring setup. On socket close, a non-NULL pointer identifies a vmalloc-backed vector without a scan. If TX skbs remain, defer the whole vector to system_long_wq. After pg_vec is detached, a late destructor can skip the pending decrement. Use socket write-memory accounting as the deferred lifetime gate instead: an skb remains charged through its final sock_wfree(), after all ring-frame accesses. The delayed work retains a socket reference and reschedules itself until no TX skbs remain. Move pending_refcnt release to packet_sock_destruct() so late skb destructors and deferred cleanup can safely use it after packet_release(). Page-backed teardown remains synchronous, and no lock is added to the TX completion hot path. | ||||
| CVE-2026-80837 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't queue packet path object notifications All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same lines apply. nft_obj_notify() is exported and reached from the packet path. Its only in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68), which notifies with GFP_ATOMIC while evaluating a rule for a transiting packet, holding no mutex. Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple notifications into one skbuff") that notification is no longer sent immediately. __nft_obj_notify() queues it onto nft_net->notify_list via nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare list_add_tail(). notify_list has no lock of its own (include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex: the six other enqueue sites all run inside a netlink transaction, and the drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held. Sending packets through a chain that references a depleted quota object therefore races an unlocked list_add_tail() against list_del() + kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add() then stores through an sk_buff that has already been freed: BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0 Write of size 8 at addr ff110001047183c0 by task poc/76 CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4 Call Trace: <IRQ> __nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191 net/netfilter/nf_tables_api.c:1211 net/netfilter/nf_tables_api.c:8743) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain_inet nf_hook_slow __ip_local_out ip_push_pending_frames udp_send_skb udp_sendmsg __x64_sys_sendto Allocated by task 77: __alloc_skb (net/core/skbuff.c:704) __nft_obj_notify (include/net/netlink.h:1055 net/netfilter/nf_tables_api.c:8731) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain Freed by task 79: nf_tables_commit (include/linux/skbuff.h:1332 net/netfilter/nf_tables_api.c:10759 net/netfilter/nf_tables_api.c:11185) nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574) netlink_unicast netlink_sendmsg The buggy address belongs to the cache skbuff_head_cache of size 232 Queueing from the packet path is wrong even leaving the race aside: notify_list is only drained by nft_commit_notify() from nf_tables_commit() (:11185), so a notification enqueued outside a transaction is not sent until some later netlink batch commits, if one ever does. The gfp argument that nft_obj_notify() still takes is a leftover of the pre-67cc570edaa0 behaviour, where this path called nfnetlink_send() directly. Restore that: split the message construction out into nft_obj_notify_alloc() and let each caller decide what to do with the skb. nft_obj_notify(), the exported one reached from the packet path, sends it straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps queueing it, so transaction notifications are still coalesced. | ||||
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-80834 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Remove crypto_rng interface Since the crypto_rng interface for hardware PRNGs is unused and is redundant with hwrng and the actual Linux RNG, it's being phased out. Most drivers for it were already removed. Go ahead and remove the sun8i-ce support which is one of the only remaining ones. Note that the sun8i-ce support for hwrng remains in place. That is the interface that actually matters. As usual for crypto_rng, this driver was also buggy: its ->generate() function had a use-after-free vulnerability due to using wait_for_completion_interruptible_timeout() without handling shutting down the DMA operation if a signal is sent. There's no point in fixing this separately only to remove the code anyway, so this commit is marked with Fixes and Cc stable. | ||||
| CVE-2026-80833 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Remove crypto_rng interface Since the crypto_rng interface for hardware PRNGs is unused and is redundant with hwrng and the actual Linux RNG, it's being phased out. Most drivers for it were already removed. Go ahead and remove the sun8i-ss support which is one of the only remaining ones. As usual for crypto_rng, this driver was also buggy: its ->generate() function had a use-after-free vulnerability due to using wait_for_completion_interruptible_timeout() without handling shutting down the DMA operation if a signal is sent. Also, it had a buffer overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'. There's no point in fixing these bugs separately only to remove the code anyway, so this commit is marked with Fixes and Cc stable. | ||||
| CVE-2026-80726 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-80521 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge(). | ||||
| CVE-2026-74743 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: inherit needed_headroom and needed_tailroom from lowerdev macvlan devices inherit hard_header_len from lowerdev during macvlan_init(), but leave needed_headroom and needed_tailroom set to 0. When the underlying lowerdev requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space. This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header() prepends header data or when lower devices append tailroom. Fix this by: 1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init(). 2. Propagating needed_headroom and needed_tailroom updates to attached macvlans in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. | ||||
| CVE-2026-74521 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes. | ||||
| CVE-2026-74496 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74294 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. | ||||
| CVE-2026-74291 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: topology: Check PCM and DAI name strings before use Topology objects store several PCM and DAI names in fixed-size UAPI arrays. Other topology parser paths validate these fields with bounded strnlen() checks before using them as C strings, but the PCM and DAI paths still pass some fixed-size arrays directly to strlen(), devm_kstrdup(), DAI lookup, and diagnostic prints. A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream capability name can therefore make the parser read past the end of the fixed-size field. Reject unterminated PCM and DAI name fields before consuming them as C strings. | ||||
| CVE-2026-74289 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/[email protected]/ | ||||