Export limit exceeded: 372509 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (7222 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-59094 | 1 Pathwaycom | 1 Pathway | 2026-07-06 | 7.5 High |
| Pathway through 0.31.1, fixed in commit d09722e, document store applies a caller-supplied glob pattern to indexed document paths using a hand-written recursive matcher that branches two ways on each ** token without memoization, giving exponential worst-case complexity. The filepath_globpattern value is taken from the body of the unauthenticated HTTP endpoints /v1/retrieve, /v1/inputs and /v2/answer and compiled into a filter evaluated once per indexed document, with no length or **-count limit. A remote unauthenticated attacker can submit a short pattern containing many ** tokens to consume CPU for tens of seconds per request, and a small number of requests denies service. | ||||
| CVE-2026-14790 | 1 Gpac | 1 Gpac | 2026-07-06 | 3.3 Low |
| A flaw has been found in GPAC 26.02.0. This affects the function nhmldump_send_frame of the file src/filters/write_nhml.c of the component Media File Handler. Executing a manipulation can lead to null pointer dereference. The attack requires local access. The exploit has been published and may be used. This patch is called bd1d94e70e3bef364c07c5a1d94eca5c9f56e160. A patch should be applied to remediate this issue. The project explains: "I would consider most of these more as bugs than vulns but anyway they're good to fix". | ||||
| CVE-2026-14623 | 1 Omec-project | 1 Amf | 2026-07-06 | 4.3 Medium |
| A vulnerability was determined in omec-project amf up to 2.1.1. This issue affects the function RRCInactiveTransitionReport of the component NGAP Message Handler. Executing a manipulation can lead to denial of service. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This patch is called 34bc6724acc97dba1f8691e586da95b042cb612d. A patch should be applied to remediate this issue. | ||||
| CVE-2026-14629 | 1 Rt-thread | 1 Rt-thread | 2026-07-06 | 4.3 Medium |
| A flaw has been found in RT-Thread up to 5.2.2. Affected is the function read/write/sys_ioctl of the file components/lwp/lwp_syscall.c of the component Parameter Handler. Executing a manipulation can lead to divide by zero. The attack may be launched remotely. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-24012 | 1 Apache | 1 Iotdb | 2026-07-06 | 7.5 High |
| Uncontrolled Resource Consumption vulnerability in Apache IoTDB. Some interface fails to impose reasonable limits on the time span and aggregation interval of the query. An attacker can construct a request with extreme parameters (e.g., a very large time range combined with a minimal interval). This forces the DataNode to build an enormous result set in memory, which exhausts the Java heap and causes the DataNode process to crash. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue. | ||||
| CVE-2026-14801 | 1 Gpac | 1 Gpac | 2026-07-06 | 3.3 Low |
| A security vulnerability has been detected in GPAC 26.03-DEV-rev342-g80071f700-master. The impacted element is the function txtin_probe_duration of the file src/filters/load_text.c of the component TeXML File Handler. Such manipulation of the argument txml_timescale leads to divide by zero. An attack has to be approached locally. The name of the patch is 86a5191f2e750c767253e27ed6cfd6d547afebc2. A patch should be applied to remediate this issue. | ||||
| CVE-2026-58226 | 1 Elixir-mint | 1 Hpax | 2026-07-06 | N/A |
| Inefficient Algorithmic Complexity vulnerability in elixir-mint hpax allows unauthenticated denial-of-service via unbounded HPACK integer decoding. hpax decodes HPACK variable-length integers with no upper bound on the decoded value or the number of continuation octets. 'Elixir.HPAX.Types':decode_remaining_integer/3 accumulates the integer as int + (value <<< m), shifting by 7 more bits for each continuation octet and stopping only on a terminating octet or truncated input, never because the integer grew too large. Because BEAM integers are arbitrary precision, a run of N continuation octets builds an O(N)-bit bignum and re-adds into an ever-larger bignum on each step, so the total decoding cost is superlinear (about O(N^2)). An unauthenticated attacker who can send an HTTP/2 header block to a server using this decoder (reached through the 'Elixir.HPAX':decode/2 entry point) can supply a small header block that forces a large, attacker-controlled amount of CPU (and transient memory), a denial-of-service amplification. This issue affects hpax from 0.1.1 before 1.0.4. | ||||
| CVE-2026-36478 | 1 Technitium | 1 Dns Server | 2026-07-05 | 7.5 High |
| An issue in Technitium DNS Server v.14.3 and before allows a remote attacker to cause a denial of service via the DnsServerApp.exe, DnsServerApp.dll, TechnitiumLibrary.Net/Dns/DnsClient.cs components | ||||
| CVE-2026-43355 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails. | ||||
| CVE-2026-31732 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: Fix resource leaks on errors in gpiochip_add_data_with_key() Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1. | ||||
| CVE-2022-49803 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: Fix memory leak of nsim_dev->fa_cookie kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). | ||||
| CVE-2026-47262 | 2 Containerd, Redhat | 2 Containerd, Hummingbird | 2026-07-03 | 6.5 Medium |
| containerd is an open-source container runtime. Versions prior to 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2, contain a vulnerability that allows a maliciously crafted image to cause a Denial of Service (DoS) condition. When creating a container from this image, memory exhaustion occurs, leading to an Out Of Memory (OOM) kill of the containerd process. This renders the container runtime API unavailable and can disrupt clients such as the Docker Engine or Kubernetes control-plane components. This issue has been fixed in versions 1.7.33, 2.0.10, 2.1.9, 2.2.5 and 2.3.2. | ||||
| CVE-2026-9563 | 1 Eclipse | 1 Parsson | 2026-07-03 | 7.5 High |
| In Eclipse Parsson published Maven Central artifacts before version 1.1.8, the JSON parser did not enforce a default maximum on the number of characters consumed while parsing a single JSON document. Applications that parse attacker- controlled JSON can be forced to consume excessive CPU and memory by processing very large documents, including large arrays, objects, strings, numbers, whitespace, or nested structures, resulting in a denial of service. Eclipse Parsson 1.1.8 introduces a configurable maximum parsing limit with a default limit of 15 million parser-consumed characters. | ||||
| CVE-2026-54260 | 1 Wagtail | 1 Wagtail | 2026-07-02 | 4.3 Medium |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, an authenticated admin user can trigger expensive rendition processing with purposefully crafted filter specs resulting in potentially service degradation. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. | ||||
| CVE-2026-54712 | 1 Opentelemetry | 1 Opentelemetry-java-instrumentation | 2026-07-02 | 5.3 Medium |
| OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.27.0, the RMI context propagation payload reader limits the number of context entries but does not limit the aggregate size of the strings read from the stream. An attacker who can reach an RMI endpoint on an instrumented JVM can send an oversized context propagation payload. This can cause excessive memory allocation while the JVM reads the payload, potentially leading to denial of service. The issue affects only deployments where RMI instrumentation is enabled and an RMI endpoint is network-reachable. This issue has been fixed in version 2.27.0. | ||||
| CVE-2026-55594 | 1 Imagemagick | 1 Imagemagick | 2026-07-02 | 5.3 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-51 and 7.1.2-26, a missing depth check in the MVG decoder will result in a stack overflow when a crafted image is provided. This issue has been fixed in versions 6.9.13-51 and 7.1.2-26. | ||||
| CVE-2026-56371 | 1 Imagemagick | 1 Imagemagick | 2026-07-02 | 5.3 Medium |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a memory leak in coders/txt.c when processing TXT files with texture attributes: the texture object allocated via ReadImage is not released when GetTypeMetrics fails, leaking memory each time a crafted TXT file with a texture attribute is processed. | ||||
| CVE-2026-55595 | 1 Imagemagick | 1 Imagemagick | 2026-07-02 | 4.7 Medium |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-51 and 7.1.2-26, when providing invalid arguments to the connected-components option an infinite loop will occur. This issue has been fixed in versions 6.9.13-51 and 7.1.2-26. | ||||
| CVE-2026-49090 | 1 Elastic | 1 Elasticsearch | 2026-07-01 | 6.5 Medium |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to a denial of service via Excessive Allocation (CAPEC-130). An authenticated user can submit a specially crafted bulk request that causes sustained high CPU consumption, which can render the affected node unable to process requests. | ||||
| CVE-2026-35505 | 1 Offis Dicom | 1 Dcmtk Toolkit | 2026-07-01 | 7.5 High |
| An unauthenticated remote attacker can repeatedly send crafted connection requests to leak memory. In single-process deployments the memory grows until the service is killed and the port stops responding until restart. | ||||