| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Ack RX overrun interrupt correctly
The RX overrun interrupt is reported in interrupt status register 4, but
gmac_irq() acknowledges it using the RX descriptor error bit from status
register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1
the shift leaves no bit in the 32-bit register.
Acknowledge the same per-port RX overrun bit that was detected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper task state validation in scaffolder backend. An authenticated user with permission to create and access Scaffolder tasks may, under specific timing and deployment conditions, affect files accessible to the Backstage backend. If backend application files are writable, the confidentiality, integrity, and availability of the backend may be compromised. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
| Use after free in WebRTC in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper state validation in DevTools in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset state when starting AP fails
ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail
later, leaving it set forever. Scanning can then attempt to restore
beaconing on such an interface, leading to:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00
Call Trace:
drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160
__ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519
ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538
in hwsim. Also, cfg80211 then allows changing the interface type,
and the off-channel path getgs confused about beaconing as well,
leading to another warning:
WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122
ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline]
__ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882
Reset the state on failures to always have it correct. |
| Information leak in Autofill in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: do not leave stale header offsets after pskb_carve()
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().
Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.")
changed Tarjan's algorithm to update lowlink with lowlink,
which is called lowpoint (unix_vertex.scc_index).
unix_vertex_dead() assumes all vertices in an SCC share the same
lowpoint, but this is not always true if an SCC has two or more
back edges, depending on the order of DFS.
For example, the graph below has two back edges from B to A
and from C to B.
A --> B --> C
^ | ^ |
`----' `----'
If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A),
each index and scc_index will be updated as follows.
A --> B --> C C = (3, 3) (index, scc_index)
B = (2, 2)
A = (1, 1)
A ... B ... C C = (3, 2)<-.
^ | B = (2, 2) -'
`----' A = (1, 1)
A ... B ... C C = (3, 2)
^ | . . B = (2, 1)<-.
`----' .... A = (1, 1) -'
Then, unix_vertex_dead() thinks that B is passed to another
SCC with scc_index 2, and the SCC is not garbage-collected.
This does not happen if DFS walks in a different order below
or starts from B.
1 3
A --> B --> C
^ | ^ |
`----' `----'
2 4
Let's unify scc_index across the SCC when finalising it.
Note that updating v->index was previously done in unix_scc_dead(),
when called from __unix_walk_scc(), just to save one loop. Since
__unix_walk_scc() now iterates over the SCC anyway, the update is
moved back to __unix_walk_scc() and 'fast' argument is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_data()
before touching any of its fields, and when a FUNC_CTRL event turns
out to be the short, header-only form (a plain enable/disable ack
with no status word), decode the result from the header's own flag
byte instead (0 = success, otherwise failure).
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: guard against null kobj name
In the client, if `init_path()` errors, the callee tries to clean up
with `rtrs_clt_close_conns()`. However, this can lead to calling the
event tracing code with `clt_path->kobj->name` being `NULL` and thus
causing a null pointer dereference when trying to copy from it.
This just adds a guard to check that the name is not `NULL` before
copying from it. The server appears to have a similar pattern. |
| Authentication bypass OAuth device authorization flow in Devolutions Server 2026.3.7.0 and earlier allows a remote attacker to take over a user's account via replay of a captured device verification link by an authenticated victim. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fddi: skfp: fix NULL deref when setting the MAC address while down
skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without
checking netif_running(). ResetAdapter() first calls card_stop(), which
sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(),
which walks the two transmit queues:
for (i = QUEUE_S; i <= QUEUE_A0; i++) {
queue = smc->hw.fp.tx[i] ;
...
t = queue->tx_curr_get ;
smc->hw.fp.tx[] is only populated by init_tx(), which is reached from
skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() ->
init_mac() -> init_tx(). The private area is allocated and zeroed by
alloc_fddidev(), so on an interface that has never been brought up both
queue pointers are still NULL. The hw_state test at the top of
mac_drv_clear_tx_queue() does not catch this, because card_stop() has
just set STOPPED; the function proceeds into the loop and dereferences
NULL. ResetAdapter() does call init_smt() itself, but only after the
queues have been cleared.
Setting the MAC address on a down interface therefore oopses:
ip link set dev fddi0 address 02:00:00:00:00:01
BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp]
Read of size 8 at addr 0000000000000010 by task ip/302
Call Trace:
<TASK>
mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
netif_set_mac_address+0x1e4/0x2c0
do_setlink+0x684/0x2680
</TASK>
Address 0x10 is the offset of tx_curr_get, the third pointer in
struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which
ResetAdapter() calls immediately afterwards, dereferences
smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective
hw_state test; the transmit queue merely crashes first. Both are
covered by the guard below.
Skip the adapter reset when the interface is down. dev_addr_set() is
left unconditional, so the new address is still recorded in
dev->dev_addr. Nothing is lost by not resetting the adapter here:
skfp_open() deliberately re-reads the factory address on every open,
read_address(smc, NULL);
eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a);
and the comment above it states this is done to discard exactly such an
address override across a close/open cycle. An address set while the
interface is down could not have survived the following open even
before this change, so the guard removes no working behaviour. Guarding
the hardware side of ndo_set_mac_address() with netif_running() is
established practice; skge_set_mac_address() has done so since commit
2eb3e621c4e0 ("skge: set mac address bonding fix").
Guarding the reset as a whole, rather than NULL-checking the queues, is
also what the rest of the driver expects. After a previous open/close
the queue pointers are stale but non-NULL, so there is no crash, yet
ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable
Board Interrupts") while skfp_close() has already called free_irq() -
the adapter would be brought back online with no handler installed. The
only other ResetAdapter() caller is skfp_interrupt(), which by
construction runs only while the device is open.
Found by automated driver testing against an emulated SysKonnect FDDI
adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires
CAP_NET_ADMIN. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: set timer->private_data before registering the PCM timer
snd_pcm_timer_init() calls snd_device_register() to link the new
struct snd_timer into the global timer list while it still carries
hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop),
and only afterwards sets timer->private_data = substream.
Once the timer is on the list under register_mutex, a concurrent
reader can already reach it through the same mutex and invoke these
callbacks. /proc/asound/timers does this via c_resolution(), and
snd_timer_open()+snd_timer_start() reach start()/stop() the same way.
All three dereference timer->private_data, which for this brief
window is NULL, giving a NULL-pointer dereference:
substream = timer->private_data;
return substream->runtime ? ... // substream is NULL
Move the private_data/private_free assignment before
snd_device_register() so the timer is never visible on the list
without its private_data set. On the snd_device_register() failure
path, private_free() (snd_pcm_timer_free()) can now run, but it only
does substream->timer = NULL, which is already NULL at that point
since substream->timer is set to the new timer just once, after a
successful registration -- so the failure path stays safe. |
