| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service. |
| A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary. |
| A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang. |
| The SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. In 4.19.2 and 4.20.2, the library permits attacker-controlled XPath transforms while processing XML signatures in specially crafted SAML messages. XPath evaluation can consume uncontrolled processing resources, allowing a remote unauthenticated attacker to deny service to any entity relying on SimpleSAMLphp or directly on the SAML2 library. The mitigation limits the number of transforms, permits only transform algorithms identified by the SAML 2.0 Core specification, and specifically rejects XPath transforms. This issue is fixed in versions 4.19.3 and 4.20.3. |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7748. |
| In ccci, there is a possible out of bounds read due to a missing bounds check. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10981532; Issue ID: MSV-7660. |
| In display, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11009963; Issue ID: MSV-7658. |
| Formie is a Craft CMS plugin for creating forms. Prior to 3.1.27, Formie can pass request-derived Hidden field defaults such as HTTP User Agent, Referer URL, Current URL, Current URL without Query String, Query Parameter, and Cookie Value to Craft's Twig rendering layer during front-end form rendering. An unauthenticated attacker can place Twig syntax in one of these request-controlled inputs when a public form contains an affected Hidden field. Hidden::getFrontEndInputOptions() then assigns the value to defaultValue and calls renderString, causing server-side template evaluation rather than treating the request data as a plain string. Depending on the Craft site configuration and available Twig capabilities, exploitation can disclose sensitive information, modify application state, or achieve remote code execution. This issue is fixed in version 3.1.27. |
| BBOT's unarchive module rejects archives containing symlink entries before extraction, but for zip and 7z archives it failed to detect symlinks whose listing carries a DOS-attribute prefix before the unix mode, as produced by legacy versions of p7zip. Such an archive, downloaded and extracted during a scan (for example via filedownload), bypassed the guard and caused an attacker-controlled symlink to be written into the extraction directory. The effect is limited to planting the symlink (its target is not written through), and only hosts using such a legacy p7zip build are affected; current mainline 7-Zip is not. |
| BBOT's `github_workflows` module could be induced to write a downloaded artifact outside its configured output directory: its path-containment check did not resolve `..`, so a crafted `CODE_REPOSITORY` URL could traverse out of the intended folder. The write is bounded to two directory levels above the output location and its target is determined by the operator's configuration, not the attacker. |
| Use-after-free in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: fix out-of-bounds read in keyring_get_key_chunk()
For description-level chunks keyring_get_key_chunk() advances the read
pointer by level * sizeof(long) past the inline prefix but only
bounds-checks the prefix, so a long enough key description is read past
its kmemdup(desc, desc_len + 1) allocation. Compute the full byte
offset and bounds-check the description against it before reading.
The walk only reaches a description-level chunk when two keys collide
through the hash, x, type and domain_tag chunks, so this is reached from
an unprivileged add_key(2) with a crafted pair of same-type keys whose
index hashes collide; KASAN reports a slab-out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
Unlike NCT6106, NCT6116 only has three temperature registers, and with
it only three temperature source and temperature source configuration
registers. The register addresses match those of NCT6106 and can be
re-used.
The code used a separate array to list the temperature source registers
for NCT6116, but used the size of the NCT6106 register array to set
the number of registers. The NCT6106 register array provides six addresses,
while the temperature source register array for NCT6116 only provides three
addresses. This causes a KASAN report.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775]
Read of size 2 at addr ffffffffc19561a6 by task modprobe/954
...
Call Trace:
dump_stack+0x7d/0xa7
print_address_description.constprop.0+0x1c/0x220
? __kasan_kmalloc.constprop.0+0xc9/0xd0
? __kmalloc_node_track_caller+0x194/0x5b0
? nct6775_probe+0x936/0x46f0 [nct6775]
? nct6775_probe+0x936/0x46f0 [nct6775]
...
Fix the problem by hard-coding the number of temperature and temperature
configuration registers to three for NCT6116. Drop the unnecessary
NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-smart2) DMA-align output buffer
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for this violation.
Any operation that triggers send_output_report() (like setting a fan speed
or updating the interval) causes the USB DMA mapping. On systems with
non-coherent caches, this structural bug causes immediate and deterministic
memory corruption.
Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower limit of the clamp_val in
auto_update_interval_store() from 0 to 500 milliseconds. This guarantees
a reasonable minimum sleep window between sensor updates, protecting the
system from intentional or accidental I2C bus denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device. |
