| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS()
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix Rx queue stall on alloc failure
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: detect_link_and_local_sink: DP alt mode timeout path leaks prev_sink reference
prev_sink is unconditionally retained via dc_sink_retain at function
entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT
returns false without releasing prev_sink. All other return paths in the
function correctly call dc_sink_release(prev_sink), making this the only
missing cleanup.
(cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: Avoid possible truncation with calculating visible size
Calculating the visible size of the system framebuffer can result in
truncation of the result. The calculation uses 32-bit arithmetics,
which can overflow if the values for height and stride are large. Fix
the issue by multiplying with mul_u32_u32(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in
amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and
BO_HANDLES chunk types.
The CP_GFX_SHADOW case previously shared a bare break with the dependency
and syncobj chunk types, which do not dereference a fixed-size struct. When
userspace submits this chunk with length_dw == 0, vmemdup_array_user() is
called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR()
check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct
drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the
ZERO_SIZE_PTR and causing a NULL-pointer dereference.
This is reachable by an unprivileged process in the render group. Reject
undersized chunks with -EINVAL during pass1 so the bad submission is
rejected before pass2 ever dereferences the data.
(cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657) |
| Logs contain replayable JWT tokens in Apache Ranger versions <= 2.8.0
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| Vulnerability in tapestry-core in Apache Tapestry 5.5.0+ on all platforms allows attackers to download clsspath assets via specially crafted URLs.
Users are recommended to upgrade to version 5.9.1, which fixes this issue. |
| An LDAP Injection vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to retrieve sensitive information from a connected LDAP authentication server through an exposed authentication or management web interface. This vulnerability may also allow a remote attacker to authenticate as an LDAP user with a partial identifier if they additionally have that user's valid passphrase. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Use sender devcom for MPV master-up
After PCIe DPC recovery, mlx5 reloads the affected functions and
replays multiport affiliation events. In the reported failure, the
first relevant device error was:
pcieport 0000:10:01.1: DPC: containment event
pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal)
pcieport 0000:10:01.1: [ 5] SDES (First)
mlx5 recovered the PCI functions and resumed 0000:11:00.1. During
that resume, RDMA multiport binding replayed
MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent
MPV_DEVCOM_MASTER_UP. The host then panicked with:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
RDI: 0000000000000000
Call trace included:
mlx5_devcom_comp_set_ready
mlx5e_devcom_event_mpv
mlx5_devcom_send_event
mlx5_ib_bind_slave_port
mlx5r_mp_probe
mlx5_pci_resume
MPV devcom registration publishes mlx5e private data to the component
peer list before mlx5e_devcom_init_mpv() stores the returned component
device in priv->devcom. A concurrent master-up event can therefore
reach a peer whose private data is visible but whose priv->devcom
backpointer is still NULL.
MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private
data as event_data. The ready bit is stored on the shared devcom
component, not on an individual peer. Use the sender devcom when
marking the MPV component ready.
This preserves the readiness transition while avoiding a NULL
dereference of the peer devcom pointer during affiliation replay after
PCI error recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
phonet: pep: fix use-after-free in pep_get_sb()
pep_get_sb() doesn't consider that pskb_may_pull() might have relocated
the skb data, and continue to access the older pointer, causing UAF.
Reproduced under KASAN:
BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0
Read of size 1 at addr ff11000105510f50 by task repro/157
pep_get_sb+0x234/0x3b0
pipe_handler_do_rcv+0x5f7/0xa10
pep_do_rcv+0x203/0x410
__sk_receive_skb+0x471/0x4a0
phonet_rcv+0x5b3/0x6c0
__netif_receive_skb+0xcc/0x1d0
Refetch the header with skb_header_pointer() after pskb_may_pull(), so
the possibly stale pointer is no longer dereferenced. There are better
ways to solve this, but, this is the less instrusive one. |
| A flaw was found in multicluster-global-hub. During a ManagedClusterMigration, the system incorrectly grants all managed hubs read access to a shared communication topic. This allows a compromised managed hub to intercept and collect sensitive bootstrap kubeconfigs, which contain API server tokens intended for other hubs. These tokens have an extended validity of approximately 9.86 years, significantly increasing the risk of unauthorized access and information disclosure to other managed clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: don't re-enter an instance callback that is still running
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/bios: range check LFP Data Block panel_type2
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Hold a dma-buf reference for imported BOs
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
(cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) |
| The Admin Safety Guard — Login Security, Limit Logins, 2FA & Brute Force Protection WordPress plugin before 1.4.0 does not perform any capability check on one of its REST API endpoints, allowing unauthenticated attackers to retrieve the full list of registered users including their usernames, email addresses, roles, and two-factor authentication enrollment status. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to retrieve stored contact messages and associated user data belonging to other users. |
| The WPC Order Tip for WooCommerce WordPress plugin before 3.3.1 does not perform authorisation or nonce checks in one of its reporting features, allowing unauthenticated attackers to retrieve sensitive order data belonging to any customer of the store, such as billing names, order IDs and statuses, fee amounts and order dates. |
