| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| veraPDF is an open source PDF/A validation library. Executing policy checks using custom schematron files via the CLI invokes an XSL transformation that may theoretically lead to a remote code execution (RCE) vulnerability. This doesn't affect the standard validation and policy checks functionality, veraPDF's common use cases. Most veraPDF users don't insert any custom XSLT code into policy profiles, which are based on Schematron syntax rather than direct XSL transforms. For users who do, only load custom policy files from sources you trust. This issue has not yet been patched. Users are advised to be cautious of XSLT code until a patch is available. |
| Insecure handling of ssh keys used to bootstrap clients allows local attackers to potentially gain access to the keys |
| Improper locking vulnerability in Softing Industrial Automation GmbH gateways allows infected memory and/or resource leak exposure.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| The NASA’s Interplanetary Overlay Network (ION) is an implementation of Delay/Disruption Tolerant Networking (DTN). A vulnerability exists in the version ION-DTN BPv7 implementation version 4.1.3 when receiving a bundle with an improper reference to the imc scheme with valid Service-Specific Part (SSP) in their Previous Node Block. The vulnerability can cause ION to become unresponsive. This vulnerability is fixed in 4.1.3s. |
| rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows an attacker to trigger rpgp crashes by providing crafted data. This vulnerability is fixed in 0.14.1. |
| Using Codex CLI in workspace-write mode inside a malicious context (repo, directory, etc) could lead to arbitrary file overwrite and potentially remote code execution due to symlinks being followed outside the allowed current working directory. |
| Ibexa is a composable end-to-end DXP (Digital Experience Platform). Versions 5.0.0-beta1 through 5.0.3 do not have password validation. During the transition from v4 to v5 an error was introduced into validation code which causes the validation of the previous password not to run as expected. This makes it possible for a logged in user to change their password in the back office without knowing the previous password. For example, if a user logs into their account and walks away without locking their workstation, an attacker could access the unattended session and change the password, therefore locking the legitimate user out. This issue is fixed in version 5.0.4. |
| Protection mechanism failure in the Intel(R) Graphics Driver for the Intel(R) Arc(TM) B-Series graphics before version 32.0.101.6737 may allow an authenticated user to potentially enable denial of service via local access. |
| An Insecure Direct Object Reference (IDOR) vulnerability exists in the vehicleId parameter, allowing unauthorized access to sensitive information of other users’ vehicles. Exploiting this issue enables an attacker to retrieve data such as GPS coordinates, encryption keys, initialization vectors, model numbers, and fuel statistics belonging to other users, instead of being limited to their own vehicle data. The fix for this vulnerability is a server-side authorization fix. |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. |
| astral-tokio-tar is a tar archive reading/writing library for async Rust. In versions 0.5.3 and earlier of astral-tokio-tar, tar archives may extract outside of their intended destination directory when using the Entry::unpack_in_raw API. Additionally, the Entry::allow_external_symlinks control (which defaults to true) could be bypassed via a pair of symlinks that individually point within the destination but combine to point outside of it. These behaviors could be used individually or combined to bypass the intended security control of limiting extraction to the given directory. This in turn would allow an attacker with a malicious tar archive to perform an arbitrary file write and potentially pivot into code execution. This issue has been patched in version 0.5.4. There is no workaround other than upgrading. |
| A vulnerability has been found in Freshwork up to 1.2.3. This impacts an unknown function of the file /api/v2/logout. Such manipulation of the argument post_logout_redirect_uri leads to open redirect. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.2.3 will fix this issue. You should upgrade the affected component. The vendor was contacted early about this disclosure but did not respond in any way. |
| Insufficient control flow management in the Alias Checking Trusted Module for some Intel(R) Xeon(R) 6 processor E-Cores firmware may allow a privileged user to potentially enable escalation of privilege via local access. |
| The Payment Plugins Braintree For WooCommerce plugin for WordPress is vulnerable to authorization bypass due to a missing capability check on the wc-braintree/v1/3ds/vaulted_nonce REST API endpoint in all versions up to, and including, 3.2.78. This is due to the endpoint being registered with permission_callback set to __return_true and processing user-supplied token IDs without verifying ownership or authentication. This makes it possible for unauthenticated attackers to retrieve payment method nonces for any stored payment token in the system, which can be used to create fraudulent transactions, charge customer credit cards, or attach payment methods to other subscriptions. |
| It is possible for a user in a different organization from the owner of a snapshot to bypass authorization and delete a snapshot by issuing a DELETE request to /api/snapshots/<key> using its view key. This functionality is intended to only be available to individuals with the permission to write/edit to the snapshot in question, but due to a bug in the authorization logic, deletion requests issued by an unprivileged user in a different organization than the snapshot owner are treated as authorized.
Grafana Labs would like to thank Ravid Mazon and Jay Chen of Palo
Alto Research for discovering and disclosing this vulnerability.
This issue affects Grafana: from 9.5.0 before 9.5.18, from 10.0.0 before 10.0.13, from 10.1.0 before 10.1.9, from 10.2.0 before 10.2.6, from 10.3.0 before 10.3.5. |
| A vulnerability in the web services interface of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system.
This vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected system. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could cause the system to reload, resulting in a denial of service (DoS) condition. |
| Improper Isolation or Compartmentalization in the stream cache mechanism for some Intel(R) Processors may allow an authenticated user to potentially enable escalation of privilege via local access. |
| LDAP Account Manager (LAM) is a php webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. In affected versions LAM does not properly sanitize configuration values, that are set via `mainmanage.php` and `confmain.php`. This allows setting arbitrary config values and thus effectively bypassing `mitigation` of CVE-2024-23333/GHSA-fm9w-7m7v-wxqv. Configuration values for the main config or server profiles are set via `mainmanage.php` and `confmain.php`.
The values are written to `config.cfg` or `serverprofile.conf` in the format of `settingsName: settingsValue` line-by-line.
An attacker can smuggle arbitrary config values in a config file, by inserting a newline into certain config fields, followed by the value. This vulnerability has been addressed in version 9.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: free copynotify stateid in nfs4_free_ol_stateid()
Typically copynotify stateid is freed either when parent's stateid
is being close/freed or in nfsd4_laundromat if the stateid hasn't
been used in a lease period.
However, in case when the server got an OPEN (which created
a parent stateid), followed by a COPY_NOTIFY using that stateid,
followed by a client reboot. New client instance while doing
CREATE_SESSION would force expire previous state of this client.
It leads to the open state being freed thru release_openowner->
nfs4_free_ol_stateid() and it finds that it still has copynotify
stateid associated with it. We currently print a warning and is
triggerred
WARNING: CPU: 1 PID: 8858 at fs/nfsd/nfs4state.c:1550 nfs4_free_ol_stateid+0xb0/0x100 [nfsd]
This patch, instead, frees the associated copynotify stateid here.
If the parent stateid is freed (without freeing the copynotify
stateids associated with it), it leads to the list corruption
when laundromat ends up freeing the copynotify state later.
[ 1626.839430] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 1626.842828] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth cfg80211 rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd nfs_acl lockd grace nfs_localio ext4 crc16 mbcache jbd2 overlay uinput snd_seq_dummy snd_hrtimer qrtr rfkill vfat fat uvcvideo snd_hda_codec_generic videobuf2_vmalloc videobuf2_memops snd_hda_intel uvc snd_intel_dspcfg videobuf2_v4l2 videobuf2_common snd_hda_codec snd_hda_core videodev snd_hwdep snd_seq mc snd_seq_device snd_pcm snd_timer snd soundcore sg loop auth_rpcgss vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs 8021q garp stp llc mrp nvme ghash_ce e1000e nvme_core sr_mod nvme_keyring nvme_auth cdrom vmwgfx drm_ttm_helper ttm sunrpc dm_mirror dm_region_hash dm_log iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse dm_multipath dm_mod nfnetlink
[ 1626.855594] CPU: 2 UID: 0 PID: 199 Comm: kworker/u24:33 Kdump: loaded Tainted: G B W 6.17.0-rc7+ #22 PREEMPT(voluntary)
[ 1626.857075] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 1626.857573] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024
[ 1626.858724] Workqueue: nfsd4 laundromat_main [nfsd]
[ 1626.859304] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 1626.860010] pc : __list_del_entry_valid_or_report+0x148/0x200
[ 1626.860601] lr : __list_del_entry_valid_or_report+0x148/0x200
[ 1626.861182] sp : ffff8000881d7a40
[ 1626.861521] x29: ffff8000881d7a40 x28: 0000000000000018 x27: ffff0000c2a98200
[ 1626.862260] x26: 0000000000000600 x25: 0000000000000000 x24: ffff8000881d7b20
[ 1626.862986] x23: ffff0000c2a981e8 x22: 1fffe00012410e7d x21: ffff0000920873e8
[ 1626.863701] x20: ffff0000920873e8 x19: ffff000086f22998 x18: 0000000000000000
[ 1626.864421] x17: 20747562202c3839 x16: 3932326636383030 x15: 3030666666662065
[ 1626.865092] x14: 6220646c756f6873 x13: 0000000000000001 x12: ffff60004fd9e4a3
[ 1626.865713] x11: 1fffe0004fd9e4a2 x10: ffff60004fd9e4a2 x9 : dfff800000000000
[ 1626.866320] x8 : 00009fffb0261b5e x7 : ffff00027ecf2513 x6 : 0000000000000001
[ 1626.866938] x5 : ffff00027ecf2510 x4 : ffff60004fd9e4a3 x3 : 0000000000000000
[ 1626.867553] x2 : 0000000000000000 x1 : ffff000096069640 x0 : 000000000000006d
[ 1626.868167] Call trace:
[ 1626.868382] __list_del_entry_valid_or_report+0x148/0x200 (P)
[ 1626.868876] _free_cpntf_state_locked+0xd0/0x268 [nfsd]
[ 1626.869368] nfs4_laundromat+0x6f8/0x1058 [nfsd]
[ 1626.869813] laundromat_main+0x24/0x60 [nfsd]
[ 1626.870231] process_one_work+0x584/0x1050
[ 1626.870595] worker_thread+0x4c4/0xc60
[ 1626.870893] kthread+0x2f8/0x398
[ 1626.871146] ret_from_fork+0x10/0x20
[ 1626.871422] Code: aa1303e1 aa1403e3 910e8000 97bc55d7 (d4210000)
[ 1626.871892] SMP: stopping secondary CPUs |
| Rclone is a command-line program to sync files and directories to and from different cloud storage providers. Insecure handling of symlinks with --links and --metadata in rclone while copying to local disk allows unprivileged users to indirectly modify ownership and permissions on symlink target files when a superuser or privileged process performs a copy. This vulnerability could enable privilege escalation and unauthorized access to critical system files, compromising system integrity, confidentiality, and availability. This vulnerability is fixed in 1.68.2. |
