| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, header signature verification counts the unused padding bits of the PubKeysBitmap toward the two-thirds validator quorum. These padding bits do not correspond to any validator and are ignored by the actual BLS aggregate-signature check, so a malicious or compromised block producer can set them to reach the required quorum while gathering fewer genuine validator signatures than the protocol demands. As a result, nodes that import or intercept the header accept it as correctly signed without a real two-thirds quorum, weakening consensus safety and undermining finality. This issue is fixed in version 1.7.20. |
| The Estatik Real Estate Plugin WordPress plugin before 4.3.4 does not validate the same recipient list that it later uses to address the message sent by its property request form, allowing unauthenticated users to send emails to arbitrary recipients with arbitrary subject, body and Reply-To on sites where the form is configured to route to a custom address. |
| A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 20.3.27, 21.2.19, and 22.0.2, HttpTransferCache comma-joins repeated request parameters, allowing semantically distinct HttpClient requests to use the same transfer-cache key and reuse a wrong backend response. This issue is fixed in versions 20.3.27, 21.2.19, and 22.0.2. |
| Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, the `$import-pnp` operation in Pathling Server accepts a caller-supplied `exportUrl` and uses it as the remote FHIR Bulk Export endpoint without constraining it to a trusted source. When PNP credentials are configured, Pathling builds a credentialed bulk-export client targeting the caller-chosen host, downloads manifest-selected files, and then reclassifies those staged files as trusted local `file://` imports - bypassing the configured `allowableSources` allowlist that protects the ordinary `$import` operation. This is fixed in Pathling Server 2.0.0. As a workaround, disable the `$import-pnp` operation (`pathling.operations.importPnpEnabled=false`) or do not configure PNP credentials. |
| The Formidable Forms WordPress plugin before 6.32.1 does not properly validate the status of a PayPal subscription payment before marking it complete, allowing unauthenticated users to bypass payment and trigger paid form actions — such as digital content access, license delivery, and membership activation — without being charged. |
| The Simple Membership WordPress plugin before 4.7.7 does not verify that a PayPal payment notification was sent to the site's own configured merchant account before activating a membership, allowing unauthenticated users to activate or extend a membership using a payment made to an arbitrary PayPal account they control. |
| The Simple CAPTCHA with Cloudflare Turnstile WordPress plugin before 1.42.0 does not bind its Turnstile validation cache to the single-use challenge token in its Forminator integration, instead keying it to an attacker-controlled, reusable request value, allowing unauthenticated attackers to solve one challenge and then replay token-less form submissions for a short window, defeating the anti-abuse protection the plugin provides. |
| The Subscriptions for WooCommerce WordPress plugin before 2.0.1 does not validate the payment amount or bind the PayPal order token to the order being completed on the WooCommerce order-received flow: it captures a client-supplied token and marks the order paid whenever the capture status is COMPLETED, without comparing the captured amount to the order total. This allows an attacker (unauthenticated where guest checkout is enabled) to substitute an approved, uncaptured PayPal order token and have an expensive order marked paid without paying its price. |
| The WP Events Manager WordPress plugin before 2.2.5 does not verify that an incoming payment notification originates from the site's configured merchant account, nor that the paid amount matches the booking total, allowing unauthenticated users to mark any booking as paid without a legitimate payment reaching the merchant, including other users' bookings. |
| The RegistrationMagic WordPress plugin before 6.0.9.5 does not compare the verified PayPal capture's amount, currency, payee, or prior use against the registration it is finalising: its server-side check only confirms the capture status is COMPLETED. An unauthenticated attacker can therefore finalise an expensive paid registration with any genuinely-completed low-value capture, and replay a single capture across unlimited registrations because captures are not de-duplicated. |
| The WP Hotel Booking WordPress plugin before 2.3.2 does not verify that a payment notification corresponds to a payment made to the site's own merchant account, nor that the paid amount matches the booking total, allowing unauthenticated users to have their bookings marked as fully paid without any payment reaching the site owner. |
| An issue in the billing and license activation subsystem allows remote attackers to bypass payment authorization workflows. By exploiting insufficient cryptographic validation or lack of server-side state verification on promotional/lifetime-deal (LTD) redemption codes, an unauthenticated attacker can forge valid redemption tokens or replay existing single-use codes to activate permanent, tier-highest paid subscriptions without a financial transaction. |
| Insufficient verification of data authenticity in Caliptra Core ROM and Core Firmware (validate_debug_unlock_token()) in subsystem mode allows an attacker with access to the integrator's debug unlock signing service to unlock production debug on an unintended device by presenting a valid token issued for a different device sharing the same debug unlock key hash. The 384-bit challenge nonce continues to prevent replay of previously issued tokens. Practical impact is limited to loss of per-device scope enforcement within a set of devices that share the same unlock authority by design; it does not enable debug unlock on devices outside that set.
This issue affects Core ROM: 2.0.0 through 2.0.2, 2.1.0 through 2.1.1; Core Firmware: 2.0.0 through 2.0.1, 2.1.0. |
| A flaw was found in openshift/oauth-proxy. On paths configured to bypass authentication (skip-auth-regex), the proxy forwards client-supplied identity headers (X-Forwarded-User, X-Forwarded-Email, X-Forwarded-Access-Token) to the upstream application without stripping them. An unauthenticated attacker can inject forged identity headers on whitelisted paths. |
| Apache CXF's JwtRequestCodeFilter copies all claims from a signed request JWT into the authorization parameter map without excluding security-sensitive parameters. A client that can produce a validly-signed request JWT (e.g., one whose client_secret is known or compromised) can thereby substitute the code_challenge, code_challenge_method, nonce, and state values that were set in the outer HTTP request, undermining PKCE integrity and OpenID Connect replay protection. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| Apache CXF’s OIDC relying-party token validation could accept self-issued ID tokens without enforcing required claim checks (issuer/subject/audience/time and sub_jwk binding), enabling authentication bypass with crafted tokens. However, note that self-issued ID tokens are not accepted by default in the validator. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fixes this issue. |
| Baileys is a cocket-based TS/JavaScript API for WhatsApp Web. In versions prior to both 6.7.22 and 7.0.0-rc12, any Baileys session can be sent a malicious payload via the placeholderResendMessage and trigger a fake messages.upsert event with a fake message key and payload. This allows anyone to spoof messages. The same exploit also allows an attacker to corrupt the app state sync system by sending fake key shares, and also allows for history sync spoofing which also serves the same problem, injecting fake previous context or "on-demand" sync. This issue has been fixed in versions 6.7.22 and 7.0.0-rc12. |
| Improper link resolution before file access ('link following') in .NET allows an authorized attacker to perform tampering locally. |
| Vulnerability in the Oracle Production Scheduling product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Production Scheduling. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Production Scheduling accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N). |
