| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq
WQ into hdev->workqueue WQ which is under draining operation [1], for
commit c8efcc2589464ac7 ("workqueue: allow chained queueing during
destruction") does not allow such operation.
The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work
queue is drained, only queue chained work") was incomplete.
Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because
hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect
the queuing operation with RCU read lock in order to avoid calling
queue_delayed_work() after cancel_delayed_work() completed. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix memory leak in lpfc_create_port()
Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox
command") introduced allocations for the VMID resources in
lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the
VMID allocations, the new code would branch to the 'out' label, which
returns NULL without unwinding anything, thus skipping the call to
scsi_host_put().
Fix the problem by creating a separate label 'out_free_vmid' to unwind the
VMID resources and make the 'out_put_shost' label call only
scsi_host_put(), as was done before the introduction of allocations for
VMID. |
| In the Linux kernel, the following vulnerability has been resolved:
ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()
Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.
The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().
Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
I got the following report while doing fault injection test:
OF: ERROR: memory leak, expected refcount 1 instead of 4,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /i2c/tcpc@60/connector
If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to
avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: pxa: fix null-pointer dereference in filter()
kasprintf() would return NULL pointer when kmalloc() fail to allocate.
Need to check the return pointer before calling strcmp(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr
KASAN reported this Bug:
[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
...
[17619.698934] The buggy address belongs to the variable:
[17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]
There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.
Replacing param_get/set_int to param_get/set_ushort can fix this bug. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: mcb: fix resource leak in mcb_probe()
When probe hook function failed in mcb_probe(), it doesn't put the device.
Compiled test only. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a6xx: Fix kvzalloc vs state_kcalloc usage
adreno_show_object() is a trap! It will re-allocate the pointer it is
passed on first call, when the data is ascii85 encoded, using kvmalloc/
kvfree(). Which means the data *passed* to it must be kvmalloc'd, ie.
we cannot use the state_kcalloc() helper.
This partially reverts commit ec8f1813bf8d ("drm/msm/a6xx: Replace
kcalloc() with kvzalloc()"), but adds the missing kvfree() to fix the
memory leak that was present previously. And adds a warning comment.
Patchwork: https://patchwork.freedesktop.org/patch/507014/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone
If cloning the SKB fails, don't try to use it, but rather return
as if we should pass it.
Coverity CID: 1503456 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix warning in trace_buffered_event_disable()
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
KASAN reports that there's a use-after-free in
hci_remove_adv_monitor(). Trawling through the disassembly, you can
see that the complaint is from the access in bt_dev_dbg() under the
HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because
msft_remove_monitor() can end up freeing the monitor
structure. Specifically:
hci_remove_adv_monitor() ->
msft_remove_monitor() ->
msft_remove_monitor_sync() ->
msft_le_cancel_monitor_advertisement_cb() ->
hci_free_adv_monitor()
Let's fix the problem by just stashing the relevant data when it's
still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: amd - Fix PCI device refcount leak
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the normal and error path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: broadcom: bcm4908_enet: update TX stats after actual transmission
Queueing packets doesn't guarantee their transmission. Update TX stats
after hardware confirms consuming submitted data.
This also fixes a possible race and NULL dereference.
bcm4908_enet_start_xmit() could try to access skb after freeing it in
the bcm4908_enet_poll_tx(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix blktrace debugfs entries leakage
Commit 99d055b4fd4b ("block: remove per-disk debugfs files in
blk_unregister_queue") moves blk_trace_shutdown() from
blk_release_queue() to blk_unregister_queue(), this is safe if blktrace
is created through sysfs, however, there is a regression in corner
case.
blktrace can still be enabled after del_gendisk() through ioctl if
the disk is opened before del_gendisk(), and if blktrace is not shutdown
through ioctl before closing the disk, debugfs entries will be leaked.
Fix this problem by shutdown blktrace in disk_release(), this is safe
because blk_trace_remove() is reentrant. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may
fail and return NULL. devm_ioremap() will use res->start as input, which
may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix memory leak in uvc_gpio_parse
Previously the unit buffer was allocated before checking the IRQ for
privacy GPIO. In case of error, the unit buffer was leaked.
Allocate the unit buffer after the IRQ to avoid it.
Addresses-Coverity-ID: 1474639 ("Resource leak") |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246
[ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900
[ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240
[ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900
[ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738
[ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0
[ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix potential user-after-free
This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix out-of-bounds read
When preparing an AER-CTR request, the driver copies the key provided by
the user into a data structure that is accessible by the firmware.
If the target device is QAT GEN4, the key size is rounded up by 16 since
a rounded up size is expected by the device.
If the key size is rounded up before the copy, the size used for copying
the key might be bigger than the size of the region containing the key,
causing an out-of-bounds read.
Fix by doing the copy first and then update the keylen.
This is to fix the following warning reported by KASAN:
[ 138.150574] BUG: KASAN: global-out-of-bounds in qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.150641] Read of size 32 at addr ffffffff88c402c0 by task cryptomgr_test/2340
[ 138.150651] CPU: 15 PID: 2340 Comm: cryptomgr_test Not tainted 6.2.0-rc1+ #45
[ 138.150659] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0087.D13.2208261706 08/26/2022
[ 138.150663] Call Trace:
[ 138.150668] <TASK>
[ 138.150922] kasan_check_range+0x13a/0x1c0
[ 138.150931] memcpy+0x1f/0x60
[ 138.150940] qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.151006] qat_alg_skcipher_init_sessions+0xc1/0x240 [intel_qat]
[ 138.151073] crypto_skcipher_setkey+0x82/0x160
[ 138.151085] ? prepare_keybuf+0xa2/0xd0
[ 138.151095] test_skcipher_vec_cfg+0x2b8/0x800 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add
While doing smcr_port_add, there maybe linkgroup add into or delete
from smc_lgr_list.list at the same time, which may result kernel crash.
So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in
smcr_port_add.
The crash calltrace show below:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014
Workqueue: events smc_ib_port_event_work [smc]
RIP: 0010:smcr_port_add+0xa6/0xf0 [smc]
RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918
R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4
R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08
FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0
PKRU: 55555554
Call Trace:
smc_ib_port_event_work+0x18f/0x380 [smc]
process_one_work+0x19b/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x114/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x1f/0x30 |
