| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: serialize udp bearer replicast list updates
tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with
list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs
from the encap receive softirq (via tipc_udp_rcast_disc()) without
rtnl_lock(), so it can race the cleanup delete and corrupt the list:
list_del corruption. prev->next should be ffff8880298d7ab8,
but was ffff88802449ad38. (prev=ffff888027e3ec98)
kernel BUG at lib/list_debug.c:62!
RIP: __list_del_entry_valid_or_report+0x17a/0x200
Workqueue: events cleanup_bearer
Call Trace:
cleanup_bearer (net/tipc/udp_media.c:811)
process_one_work (kernel/workqueue.c:3302)
worker_thread (kernel/workqueue.c:3466)
The bearer can be enabled from an unprivileged user namespace, as the
TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM.
Add a spinlock to struct udp_bearer and take it around the list_add_rcu()
in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so
the two writers can no longer corrupt the list.
Reject a duplicate peer under the same lock before allocating, and remove
tipc_udp_is_known_peer(). The old lockless pre-check in
tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer
could both find it absent and add it twice.
cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the
bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add()
and add a peer after cleanup_bearer() has already emptied the list, leaking
that entry when the bearer is freed. Mark the bearer disabled under
rcast_lock once the list is emptied and refuse further additions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: fix error checking of pvr_vm_context_lookup()
Since pvr_vm_context_lookup() returns either NULL or a pointer, then stop
using IS_ERR() for checking the return value.
Using IS_ERR() leads to the kernel oops reported below. It can be
reproduced by passing an invalid VM context handle from userspace to the
DRM_IOCTL_PVR_CREATE_CONTEXT ioctl.
[ 92.733119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000148
[ 92.742042] Mem abort info:
[ 92.744890] ESR = 0x0000000096000004
[ 92.748686] EC = 0x25: DABT (current EL), IL = 32 bits
[ 92.754020] SET = 0, FnV = 0
[ 92.757154] EA = 0, S1PTW = 0
[ 92.760337] FSC = 0x04: level 0 translation fault
[ 92.765243] Data abort info:
[ 92.768129] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 92.773626] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 92.778763] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 92.784098] user pgtable: 4k pages, 48-bit VAs, pgdp=000000088ed23000
[ 92.790550] [0000000000000148] pgd=0000000000000000, p4d=0000000000000000
[ 92.797381] Internal error: Oops: 0000000096000004 [#1] SMP
[ 92.803027] Modules linked in: powervr
[ 92.852533] CPU: 0 UID: 0 PID: 409 Comm: triangle Not tainted 7.1.0-rc5-g98b46e693b91 #1 PREEMPT
[ 92.861385] Hardware name: Texas Instruments AM68 SK (DT)
[ 92.866766] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 92.873709] pc : pvr_vm_get_fw_mem_context+0x0/0xc [powervr]
[ 92.879376] lr : pvr_queue_create+0x26c/0x440 [powervr]
[ 92.884595] sp : ffff8000837fbb00
[ 92.887895] x29: ffff8000837fbb60 x28: 0000000000000000 x27: ffff8000837fbce8
[ 92.895015] x26: ffff000807f61a40 x25: ffff000807f61a00 x24: ffff000807f64400
[ 92.902135] x23: ffff00080a5ab000 x22: ffff800079b24730 x21: ffff000807f61800
[ 92.909254] x20: ffff00080999e680 x19: 0000000000000000 x18: 0000000000000000
[ 92.916373] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 92.923492] x14: 0000000000000000 x13: 0000000000000002 x12: ffff80008145b298
[ 92.930611] x11: ffff8000844e5000 x10: ffff80008165a130 x9 : 0000000000000100
[ 92.937730] x8 : 0000000000000001 x7 : ffff0008076b27e0 x6 : ffff00080ec43b7c
[ 92.944850] x5 : ffff00080ec43b78 x4 : 0000000000000000 x3 : ffff00080999e680
[ 92.951968] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 92.959088] Call trace:
[ 92.961521] pvr_vm_get_fw_mem_context+0x0/0xc [powervr] (P)
[ 92.967173] pvr_context_create+0x190/0x410 [powervr]
[ 92.972218] pvr_ioctl_create_context+0x44/0x8c [powervr]
[ 92.977608] drm_ioctl_kernel+0xbc/0x124 [drm]
[ 92.982127] drm_ioctl+0x1f8/0x4dc [drm]
[ 92.986098] __arm64_sys_ioctl+0xac/0x104
[ 92.990102] invoke_syscall+0x54/0x10c
[ 92.993842] el0_svc_common.constprop.0+0x40/0xe0
[ 92.998532] do_el0_svc+0x1c/0x28
[ 93.001835] el0_svc+0x38/0x11c
[ 93.004969] el0t_64_sync_handler+0xa0/0xe4
[ 93.009139] el0t_64_sync+0x198/0x19c
[ 93.012792] Code: aa1703e0 d2800014 95cb0ba4 17ffffe8 (f940a400)
[ 93.018869] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks
up the bo_va for the buffer object in the caller's VM via
amdgpu_vm_bo_find(), but uses the returned pointer without checking it.
amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM,
which is the normal case for a BO that has never been mapped. The result
is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which
expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and
dereferences bo_va, causing a NULL pointer dereference.
This is reachable by any process able to issue the ioctl (render group)
simply by requesting mapping info for an unmapped BO.
Return -ENOENT when no bo_va is found, jumping to out_exec so the
drm_exec context and GEM object reference are released.
(cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9) |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix deadlock between reset thread and remove
pci_reset_function() acquires device_lock before performing the reset.
pdsc_remove() is called by the PCI core with device_lock already held.
If pdsc_pci_reset_thread() is running when pdsc_remove() is called,
destroy_workqueue() will block waiting for the work to complete, while
the work is blocked waiting for device_lock - deadlock.
Use pci_try_reset_function() which uses pci_dev_trylock() internally.
This acquires both the device lock and the PCI config access lock
without blocking - if either lock is contended, it returns -EAGAIN
immediately. This avoids the deadlock while also ensuring proper
config space access serialization during the reset.
The pci_dev_get/put calls are also removed as they were unnecessary -
the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing
the work completes before remove returns. The PCI core holds its
reference to pci_dev throughout the entire unbind sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht()
mt76_connac_get_eht_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix infinite loop in __tipc_nl_compat_dumpit
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error. |
| Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency. |
| Injection of false emergency or status messages over CPDLC may lead to misallocation of resources, operational confusion, and improper response actions by flight crews, traffic controllers, and ground operations. This type of attack can be carried out remotely over radio frequency. |
| Broadcast control frames can disconnect multiple aircraft simultaneously leading to delayed clearances and air traffic controller overload. This type of attack can be carried out remotely over radio frequency. |
| Unnumbered Disconnect (U DISC) and malformed Aviation Very High Frequency Link Control frames can terminate sessions and lead to a loss of CPDLC functions requiring a reversion to voice communication and increased controller workload. This type of attack can be carried out remotely over radio frequency. |
| Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| A security flaw has been discovered in azer react-analyzer-mcp up to 335f2a3585f265e2e88352b59b10d3b478d678b0. Affected by this vulnerability is the function generateProjectDocs of the file src/index.ts of the component analyze-projec. The manipulation of the argument projectName results in path traversal. The attack is only possible with local access. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was detected in NightTrek Supabase-MCP cc994ab2d2a36b0af6ee7c7f3e6ce8e08cda2170/db03237d92f7dc2f0da0d70a87dba84ebcde5b66. Affected by this issue is some unknown functionality of the component generate_types. The manipulation of the argument schema results in command injection. The attack needs to be approached locally. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in automateyournetwork MCPyATS up to 0.1.4. The affected element is the function processGenerateRequest of the file mcp_servers/mermaid/index.ts of the component generate_mermaid_markdown. The manipulation of the argument folder/name leads to path traversal. The attack must be carried out locally. |
| A flaw has been found in code-projects Task Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/AdminLogin.php. Executing a manipulation of the argument email/password can lead to sql injection. The attack may be performed from remote. The exploit has been published and may be used. |
| A security flaw has been discovered in Shenzhen Aitemi M300 Wi-Fi Repeater r0-ea7890a. Impacted is the function sprintf of the file /protocol.csp?fname=net&opt=smacfilter_conf&function=set&act=add&name=test&enable=1. Performing a manipulation of the argument enable/name/mac results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was found in lock-upme OPMS up to 831440f37a92c1568f2e071d5233bc873a9d8b09. The impacted element is an unknown function of the file controllers/messages/message.go of the component IN Clause Handler. Performing a manipulation of the argument ids results in sql injection. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in nxp-auto-goldvip gvip up to 1.4.0. Affected by this issue is the function SitewiseCustomFunction of the component Lambda Function Handler. Such manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.15.0 can resolve this issue. Upgrading the affected component is advised. The project explains: "The reported IAM permission configuration is a known historical issue that was already addressed in 2024, beginning with GoldVIP version 1.13.0. The permissions were updated in subsequent releases, including version 1.15.0. In addition, we also sent a request to either update or deprecate the older release in the AWS SAR application repository." |
