| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173
tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291
tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325
...
When a lock class is zapped (e.g. during module unload or key
unregistration), zap_class() clears the class's bit in
lock_classes_in_use and removes it from the class hash table.
However, existing lockdep_map instances embedded in data structures
may still retain a pointer to the zapped class in their class_cache[]
array.
When __lock_acquire() subsequently runs on such a lock, it finds
lock->class_cache[subclass] != NULL, skipping register_lock_class()
and assigning hlock->class_idx to the index of the zapped class. When
check_wait_context() or hlock_class() inspects the held_lock, it finds
!test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if
the zapped slot is subsequently re-allocated to an unrelated lock key,
the stale class_cache entry would erroneously match the unrelated
class (ABA issue).
Add lock_class_cache_is_valid() to validate that the cached class is
within lock_classes bounds, still allocated in lock_classes_in_use
(using uninstrumented arch_test_bit() in __always_inline context so it
is safe in noinstr contexts like match_held_lock()), and that
class->key matches the expected subkey (taking lockdep_set_subclass()
overrides into account). Also use READ_ONCE()/WRITE_ONCE() when
accessing class_cache[]. If the entry is invalid or stale, fall back
to register_lock_class() / look_up_lock_class(). |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset(). |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a
possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to
IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an
unusually large MTU.
Steps to reproduce:
1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will
be set to that MTU in ip_setup_cork.
2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be
set to device MTU (cork->fragsize) in __ip_append_data, rather than
to IP_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of
IPv4 header). Device MTU allows it (it's only one byte bigger than
IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward
always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward.
The Fixes tag points at the first commit where I could reproduce the
overflow with IPv4 and IP_PMTUDISC_PROBE. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot for QLAFX00, matching the I/O
accessors used elsewhere on this ring. Other adapters keep the plain
memset() on their DMA-coherent rings. The zero-fill is retained for FX00
because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of
the entry and rely on the unused tail being pre-zeroed. |
| Deserialization of untrusted data vulnerability in Ministry of Justice General Directorate of Information Technology UYAP Document Editor on Windows and Linux and Ministry of Justice General Directorate of Information Technology UYAP Document Editor on MacOS allows Object Injection.
This issue affects UYAP Document Editor: before 5.4.20; UYAP Document Editor: before 5.4.21. |
| Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in Ministry of Justice General Directorate of Information Technology UYAP Document Editor on Windows and Linux and Ministry of Justice General Directorate of Information Technology UYAP Document Editor on iOS allows OS Command Injection.
This issue affects UYAP Document Editor: before 5.4.20; UYAP Document Editor: before 5.4.21. |
| An issue in HTMLy v.3.1.1 allows a remote attacker to escalate privileges via the get_feed function in the admin.php component |
| Frappe ERPNext before 15.111.0 and 16.x before 16.22.0 contains a privilege escalation vulnerability in a record-creation endpoint that takes the record type from the request and inserts the record with permission checks disabled. Any authenticated user, including one holding no operational role, can supply a privileged record type to create privileged accounts and take full control of the site. |
| Frappe ERPNext before 15.112.0 and 16.x before 16.23.0 contains a stored cross-site scripting vulnerability in a public portal form that accepts unauthenticated submissions and stores content later rendered with insufficient neutralisation. Unauthenticated attackers can submit crafted markup that executes in the browser sessions of staff who review the stored record. |
| Frappe ERPNext 16.x before 16.27.0 contains a stored cross-site scripting vulnerability that allows users with edit rights to inject script through a record name rendered without escaping. Attackers can set a malicious record name so the script runs in the browser of any colleague who opens the page. |
| Frappe ERPNext before 15.119.1 and 16.x before 16.32.0 contains a server-side template injection vulnerability because user-controlled message fields are not validated before template rendering, allowing expressions to run in an unrestricted context. Authenticated attackers holding a common operational role can inject template expressions to read and write arbitrary database data, delete documents, send outbound requests from the server, and send mail from the site. |
| Frappe ERPNext before 15.106.0 and 16.x before 16.16.0 contains an SQL injection vulnerability in multiple endpoints caused by missing input validation. Authenticated attackers can send specially crafted requests to these endpoints to manipulate database queries and extract sensitive information from the ERPNext database. |
| Frappe ERPNext before 15.110.0 and 16.x before 16.21.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper authorization checks. Authenticated users can query these endpoints to read data beyond what their assigned role permits. |
| Frappe ERPNext before 16.14.0 contains a missing authorization vulnerability that allows authenticated users to modify master data beyond their permitted role. Attackers can send requests to certain endpoints lacking proper authorization checks to make unauthorized changes to master data records. |
| Frappe ERPNext before 15.121.0 and 16.x before 16.33.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper authorization checks. Authenticated users can call these endpoints directly to read data beyond what their assigned role permits. |
| Frappe ERPNext before 15.120.0 and 16.x before 16.33.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper permission checks. Authenticated low-privileged users can request these endpoints directly to read financial data beyond what their assigned role permits. |
| Frappe ERPNext before 15.121.0 and 16.x before 16.34.0 contains a missing authorization vulnerability in which certain endpoints fail to enforce proper authorization checks. Authenticated users can send requests to the affected endpoints to modify data beyond their permitted role, compromising data integrity. |
| Frappe ERPNext before 15.119.1 and 16.x before 16.32.0 contains an SQL injection vulnerability in some endpoints that lack input validation. Authenticated attackers with low privileges can send specially crafted requests to these endpoints to inject SQL and extract sensitive information from the ERPNext database. |
| Frappe Framework before 15.117.0 and 16.x before 16.30.0 contains an arbitrary file read vulnerability in the handling of attributes in outgoing email HTML. Attackers who can supply outgoing email content can set an attribute value referencing a local file path to expose sensitive server files. |
