| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Arc is an open, SQL-native time-series database for telemetry. Versions prior to 26.06.1 register Go's `net/http/pprof` handlers at `/debug/pprof/*` via `app.Use(pprof.New())` in `internal/api/server.go`, and `/debug/pprof` is added to `PublicPrefixes` in `cmd/arc/main.go`. The auth middleware short-circuits before the token check on prefix match, so the endpoints are reachable without any authentication. Version 26.06.1 contains a patch. Some workarounds are available. Block `/debug/pprof*` at a reverse proxy / load balancer in front of Arc, restrict Arc's API port to known-trusted networks via firewall rules, and/or patch the running build: comment out `app.Use(pprof.New())` in `internal/api/server.go` and rebuild. |
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available. |
| The The kk Star Ratings – Rate Post & Collect User Feedbacks plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.4.10.3. This is due to the software allowing users to execute an action that does not properly validate the 'payload' value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. |
| better-npm-audit through 3.11.0, and the 4.0.0-rc.2 prerelease, builds its npm audit command by interpolating the user-supplied --registry option into a command string in src/handlers/handleInput.ts without validation or quoting, then passes that string to child_process.exec() in index.ts, which spawns a shell. A registry value containing shell metacharacters such as a semicolon, pipe, or command substitution executes arbitrary operating system commands with the privileges of the process running the audit. |
| docker-socket-proxy fails to properly gate read endpoints in the /containers Docker API namespace when the CONTAINERS environment variable is set. Attackers can use GET requests to /containers/{id}/archive, /containers/{id}/export, /containers/{id}/logs, and /containers/{id}/top to read arbitrary files and download entire container filesystems as tar archives. |
| justhtml before 1.15.0 contains multiple security issues in URL sanitization helpers (clean_url_value/clean_url_in_js_string), HTML serialization, Markdown passthrough (html_passthrough=True), and several custom sanitization-policy edge cases. Depending on configuration, an attacker can bypass sanitization to inject active HTML and JavaScript — for example via encoded javascript: URLs, backslash-based relative URLs resolved as remote hosts, markup-breaking programmatic element/attribute names or HTML comments, raw </textarea> reintroduction through Markdown passthrough, or preserved <style>/<meta http-equiv=refresh>/<base href> tags in custom policies. Most custom-policy issues do not affect the default sanitize=True configuration; they primarily affect helper APIs, programmatic DOM construction, html_passthrough=True, and custom policies/transform pipelines. |
| justhtml before 1.17.0 contains multiple security issues in sanitization, serialization, and programmatic DOM handling. When custom policies preserve foreign namespaces (SVG/MathML), dangerous content such as HTML integration points (SVG <foreignObject>, MathML <annotation-xml encoding="text/html">) and mutation-XSS parser-differential payloads could survive sanitization and become active HTML after reparse; SVG filter="url(...)" and preserved <style> could leave resource-loading CSS (@import, background-image:url()). Programmatic script/style/Comment nodes could serialize into active markup. Additional hardening fixes address sanitize-pipeline cache mutation and DOM parent/child cycles that could cause infinite loops. Most issues affect advanced or custom configurations rather than the default JustHTML(..., sanitize=True) safe path. |
| justhtml before 1.12.0 (versions <= 1.11.0) contains a mutation cross-site scripting (mXSS) vulnerability in the serialization of raw-text elements such as <style> and <script>. When a DOM tree is processed by sanitize_dom() using a custom policy that keeps these elements, text nodes inside them are serialized literally without escaping, allowing attacker-controlled text containing the matching closing tag sequence to break out of the raw-text context and inject arbitrary HTML into the serialized output. The default sanitization policy is not affected because it drops the contents of style and script. |
| Brave Popup Builder (slug: brave-popup-builder) has a broken access control issue in versions through 0.8.5. Any logged-in user - Subscriber or WooCommerce Customer is enough — can read popup content they shouldn't have access to by passing a post ID in the URL. |
| Brave Popup Builder (brave-popup-builder) up to version 0.8.5 reflects UTM query parameters into popup form HTML without escaping them. |
| The SmilePass Selfie Login WordPress plugin through 1.0.2 does not perform any server-side verification of the identity it is asked to authenticate, allowing unauthenticated users to log in as any registered account, including administrators. |
| The WP Social Media Login WordPress plugin through 1.0.6 does not verify that a social login was actually completed with the identity provider before authenticating a visitor, allowing unauthenticated attackers to log in as any existing user, including administrators, by supplying that user's email address. |
| The Forminator Forms WordPress plugin before 1.57.0.5 does not restrict a network-wide setting to network administrators, allowing an administrator of any single site on a multisite network to execute arbitrary code across the entire network. |
| The Post Grid, Slider & Carousel Ultimate WordPress plugin before 1.8.1 does not sanitise and escape one of its custom post type settings before outputting it in an HTML attribute on the admin edit screen, allowing users with the Contributor role and above to inject JavaScript that executes in the session of any administrator who opens the affected item. |
| Joomla Extension - yootheme.com - Authenticated, privileged SQL injection in YOOtheme Pro 1.0.0-5.0.40 - An SQL injection allowed any contributor-level user to inject own content into SQL queries. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_table_check: skip special zero mappings
page_table_check_set() and page_table_check_clear() account mappings based
on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special
mappings, but page_table_check can still account them as file-backed
pages.
An unprivileged process can populate enough zero mappings to overflow
file_map_count and hit the existing BUG_ON(). The PTE path can do this
with the shared zero page, and the PMD path can do the same with huge zero
mappings.
Skip special zero mappings in the user page-table accounting paths. Keep
the PTE-side pte_special() check, and identify huge zero PMDs from the
mapped folio instead of pmd_special(). That covers architectures where
pmd_special() is a no-op without adding huge_zero_pfn checks to the
generic counter helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ptdump: always stabilise against page table freeing using init_mm
Previous commits have established the invariant that kernel page table
freeing is performed while an mmap read lock on init_mm is held, which
fixes races between ptdump and kernel page table freeing over init_mm.
However, x86 and arm64 can perform a ptdump over an mm other than init_mm
via ptdump_walk_pgd() and since kernel memory ranges are shared across
non-kernel mm's, this means that the race still exists for these cases.
Fix this by acquiring a nested mmap write lock for init_mm in
ptdump_walk_pgd().
This is safe as we take this after mmap write locking the mm, and nothing
acquires the init_mm lock first before locking an arbitrary mm, so no
deadlock is possible.
Also update walk_page_range_debug() to assert that init_mm is write
locked, add a comment explaining why and remove some redundant code, and
eliminate the unnecessary and confusing invocation of
walk_kernel_page_table_range().
We can safely remove the non-NULL check for walk.mm, as the mmap lock
asserts would NULL pointer deref if it was (and of course no callers do
this).
The first point at which ptdump can race kernel page table freeing is
commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page
table"), so we target this in the Fixes tag. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[[email protected]: Fixed whitespace] |
