| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
signal: Prevent exec() race
Hyunwoo debugged the following KASAN UAF splat:
BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0
Write of size 8 at addr ffff888007ed80c8 by task poc/79
...
Call Trace:
__send_signal_locked+0xb27/0xba0
do_send_sig_info+0xa7/0x160
do_send_specific+0x76/0xa0
__x64_sys_tgkill+0x193/0x270
...
Allocated by task 80:
do_timer_create+0x1a4/0x1030
__x64_sys_timer_create+0x145/0x190
...
Freed by task 12:
kmem_cache_free_bulk+0x1f8/0x4a0
kvfree_rcu_bulk+0x14f/0x1c0
kfree_rcu_work+0x128/0x1a0
...
Last potentially related work creation:
kvfree_call_rcu+0x39/0x390
__flush_itimer_signals+0x211/0x320
flush_itimer_signals+0x47/0x90
begin_new_exec+0xa6b/0x28c0
It turned out that this happens with a non-leader exec() as Hyunwoo
explained:
de_thread() calls exchange_tids() before release_task(leader), so the
struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid
now points to the thread which called execve(). pid_task() returns that
thread and lock_task_sighand() on it succeeds.
If the timer signal is blocked, its sigqueue stays queued on the leader's
task::pending. The next expiry of that timer can then run while
release_task() flushes the queue.
posixtimer_send_sigqueue() checks whether the sigqueue is already queued
with a plain list_empty(), which only reads list_head::next.
list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next
before list_head::prev, so the check can pass in between. list_add_tail()
queues the entry on the task::pending of the live thread, and the
list_head::prev store from the flush then overwrites the list_head::prev
link that list_add_tail() has just set.
__flush_itimer_signals() does not undo that either. With list_head::prev
pointing at the entry itself, its list_del_init() only stores the same
values again, so the entry is not removed from the list. It is still there
after the last reference is dropped and the timer is freed by RCU, and the
list_add_tail() of a later tgkill() follows that list_head::prev into the
freed timer.
This problem surfaced with the recent commit which moved the sigqueue flush
out of the sighand lock held region.
Hyonwoo proposed to fix this by using list_del_init_careful(), but that
just papers over the problem. After some disucssions and various attempts
to solve it, Eric pointed out that there is no reason to flush
task::pending late in release_task() and it should be done in
exit_signals() already.
As nothing can collect and deliver signals which are queued in a dying
task's pending queue, there is no reason to delay it further.
But it has to be ensured that no signals can be queued into it after that
point. exit_signals() sets PF_EXITING in task::flags, which can be used as
an indicator for this.
Cure it by:
- Preventing signal queueing for task private signals (PIDTYPE_PID) when
the task has PF_EXITING set in __send_signal_locked() and in
posixtimer_send_sigqueue().
- Protecting the unlocked setting of PF_EXITING in exit_signals() for the
task group empty and the group exit case with sighand lock
- Flushing task::pending signals right there.
Optimize that by moving the whole pending list to an on-stack list head
under sighand lock and free the signals without the lock held.
There has been quite some discussion about the lockless flush and the
non-leader exec case on weakly ordered systems. The problem is that a third
party which tries to send a posix timer signal relies on the PID lookup to
find the target task and that lookup might result in the new leader when
the signal was originaly directed to the old leader. In case that the
signal was queued on the old leader then the lockless flush raised a
concern over the following situation:
old_leader new_leader third party
A: flush_list() // list_del_in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate absolute native symlink targets before NT fixups
With symlinkroot unset, an absolute target is copied without conversion
to an NT drive path. Later code still assumes an NT prefix is present
when modifying the target and calculating the print name length.
For "/ab", this causes two failures: sym[5] and path[5] are written
past their allocations, and plen -= 2 * poff subtracts an assumed
8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534.
That underflow causes another overflow: memcpy() copies 65534 bytes
into a 24-byte buffer. A user with write access to a mounted share
can trigger these bugs with default settings.
Validate the NT drive prefix, including an ASCII drive letter, before
accessing fixed offsets or subtracting the prefix length. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: hold reference on ct until flow is released
nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe
semantics also allow to refer to the wrong conntrack from the flowtable
datapath. Hold reference on ct until flow is released after rcu grace
period.
Add rcu_barrier() on module exit path, to ensure pending flow entries
are release before module goes away. |
| Oracle VM VirtualBox before 7.2.8 allows guest OS users to cause an out-of-bounds write in the host OS in pcnetReceiveNoSync in DevPCNet.cpp in the PCNet (Am79C970A) network device model. |
| A reachable assertion vulnerability exists in the Matter SDK (connectedhomeip) before 1.4.2, specifically within the Level Control cluster's periodic server tick logic. When a MoveToLevel command is sent and immediately followed by a write of OperationMode=2 (in the Pump Configuration and Control cluster), the server tick function violates the assertion `currentLevel < maxLevel`, resulting in a crash. This can be exploited remotely without authentication to cause denial of service. Affected versions include 1.3 and 1.4 (commit ab3d5ae). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths
Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO
pages") dropped the access permission test from rxe_check_pagefault()
and left only HMM_PFN_VALID. A page faulted in read-only, for example
a page-cache folio behind a PROT_READ file mapping, then satisfies the
check and ODP write operations (RDMA WRITE, RDMA READ response, SEND
payload, atomics) modify it through kmap without ever breaking CoW.
An unprivileged user can register an ODP MR over such a mapping and
have incoming RDMA traffic overwrite the page cache of a file it only
holds O_RDONLY, including /etc/passwd or setuid binaries. This is the
same primitive class as Dirty COW and CVE-2022-2590.
mlx5 has the missing invariant: its ODP path sets the device write bit
only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring
HMM_PFN_WRITE in rxe_check_pagefault() for every operation except
RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one
fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting
forever. For a writable VMA the fault breaks CoW and the write lands
in the private page.
Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never
modifies memory, and the FLUSH access bits do not make the umem
writable, so classifying flushes as writes would make every flush
against a flush-only MR fail. |
| Smarty before 4.5.8 and 5.x before 5.8.5 contains a code injection vulnerability where the top-level nocache_hash is never restored during extends:/multi-component template inheritance, leaving it null. Attackers can supply assigned data containing a forged SmartyNocache marker that is copied verbatim into the regenerated PHP cache file, executing arbitrary PHP on include for remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| Information leak in SVG in Google Chrome prior to 154.0.8037.97 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup
rfcomm_sock_cleanup_listen() closes unaccepted child sockets through
rfcomm_sock_close(), which takes the child socket lock before
rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these
locks in reverse order while handling connections and DLC state changes,
so lockdep reports a possible deadlock.
Close dequeued children without taking their socket lock. The accept queue
owns a reference to each child, and bt_accept_dequeue() locks the child
while unlinking it and clearing its parent pointer.
Dropping the child lock makes it important to prevent a concurrent
rfcomm_connect_ind() from enqueueing a new child after cleanup observes an
empty queue. Set a listening socket to BT_CLOSED while its lock is still
held, before dropping the lock and draining the queue. The state check in
rfcomm_connect_ind() then rejects new children once cleanup starts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| Path traversal vulnerability in the Satel Iberia SenNet Datalogger Serie 200, specifically in the web portal provided by the device, which allows an authenticated user to read any file or list any directory accessible to the system user running the web server. This is possible by modifying the URL to include a path traversal payload. Successful exploitation of this vulnerability could allow an attacker to access critical system files containing confidential information. |
| A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/iser: reject a remote invalidation of an unregistered direction
A write command whose data is sent entirely as immediate data is not
registered. iser_reg_mem_fastreg() takes the DMA key path and leaves
rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has
already set dir[ISER_DIR_OUT].
iser_check_remote_inv() looks at dir[] alone and hands the descriptor to
iser_inv_desc(), which reads desc->sig_protected. A target that answers
such a command with IB_WR_SEND_WITH_INV faults the initiator.
Leaving those commands unregistered is deliberate.
The same function already terminates the connection when a target sends
a remote invalidation the initiator did not ask for. A target that
invalidates a direction that was never registered is in the same class,
so give it the same answer.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: rxe_wq do_work
RIP: 0010:iser_task_rsp+0x6d6/0xec0
Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04
RSP: 0018:ffff88811b008db8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848
RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020
RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0
R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800
R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
__ib_process_cq+0xe1/0x390
ib_poll_handler+0x6e/0x200
irq_poll_softirq+0x1df/0x480
? clockevents_program_event+0x2ba/0x860
? __pfx_irq_poll_softirq+0x10/0x10
handle_softirqs+0x18e/0x590
? __pfx_handle_softirqs+0x10/0x10
? __hrtimer_rearm_deferred+0x156/0x450
do_softirq+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x61/0x70
__alloc_skb+0x732/0x890
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx___alloc_skb+0x10/0x10
? _raw_read_unlock_irqrestore+0x16/0x50
rxe_init_packet+0x16b/0x4f0
prepare_ack_packet+0xb8/0x830
rxe_receiver+0x499/0x9980
? __pfx_rxe_receiver+0x10/0x10
? rxe_completer+0x29e5/0x38c0
? hrtimer_start_range_ns_common+0x75f/0x1730
? hrtimer_start_range_ns+0xa6/0x2c0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_rxe_receiver+0x10/0x10
do_work+0x144/0x470
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| The OMGF | GDPR/DSGVO Compliant, Faster Google Fonts. Easy. plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 's' Search Parameter via comments-atom Feed in all versions up to, and including, 6.3.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the front-end server serves the retained .tmp file without a Content-Type or X-Content-Type-Options header, enabling MIME-sniffing browsers such as Chromium to execute the injected script — a condition present by default on many Apache and nginx/php-fpm deployments. |
| This vulnerability exists in the ERP system due to unsafe deserialization of user controlled data in the affected functionality. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted data to the vulnerable functionality of the targeted system.
Successful exploitation of this vulnerability could allow the attacker to execute arbitrary code, manipulate application data or perform other unintended actions on the targeted system. |
| This vulnerability exists in the ERP system due to insufficient validation and parameterization of user supplied input in an API endpoint. An unauthenticated remote attacker could exploit this vulnerability by supplying specially crafted input to the vulnerable endpoint.
Successful exploitation of this vulnerability could allow the attacker to perform SQL injection attacks on the targeted system. |
