| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Linux kernel version 3.3-rc1 and later is affected by a vulnerability lies in the processing of incoming L2CAP commands - ConfigRequest, and ConfigResponse messages. This info leak is a result of uninitialized stack variables that may be returned to an attacker in their uninitialized state. By manipulating the code flows that precede the handling of these configuration messages, an attacker can also gain some control over which data will be held in the uninitialized stack variables. This can allow him to bypass KASLR, and stack canaries protection - as both pointers and stack canaries may be leaked in this manner. Combining this vulnerability (for example) with the previously disclosed RCE vulnerability in L2CAP configuration parsing (CVE-2017-1000251) may allow an attacker to exploit the RCE against kernels which were built with the above mitigations. These are the specifics of this vulnerability: In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). |
| Vulnerability in the Oracle WebLogic Server component of Oracle Fusion Middleware (subcomponent: Web Container). Supported versions that are affected are 10.3.6.0.0, 12.1.3.0.0, 12.2.1.1.0 and 12.2.1.2.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle WebLogic Server. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle WebLogic Server accessible data. CVSS 3.0 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Logstash 1.5.x before 1.5.3 and 1.4.x before 1.4.4 allows remote attackers to read communications between Logstash Forwarder agent and Logstash server. |
| Uniscribe in Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, Windows Server 2016, Microsoft Office 2007 SP3, and Microsoft Office 2010 SP2 allows improper disclosure of memory contents, aka "Windows Uniscribe Information Disclosure Vulnerability". This CVE ID is unique from CVE-2017-0282, CVE-2017-0284, and CVE-2017-0285. |
| Default access permissions for Persistent Volumes (PVs) created by the Kubernetes Azure cloud provider in versions 1.6.0 to 1.6.5 are set to "container" which exposes a URI that can be accessed without authentication on the public internet. Access to the URI string requires privileged access to the Kubernetes cluster or authenticated access to the Azure portal. |
| Get requests in JBoss Enterprise Application Platform (EAP) 7 disclose internal IP addresses to remote attackers. |
| Vulnerability in the Oracle Hospitality Suite8 component of Oracle Hospitality Applications (subcomponent: WebConnect). Supported versions that are affected are 8.10.1 and 8.10.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hospitality Suite8. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hospitality Suite8 accessible data. CVSS 3.0 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools component of Oracle PeopleSoft Products (subcomponent: Updates Change Assistant). The supported version that is affected is 8.54. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.0 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| The Management Web Interface in Palo Alto Networks PAN-OS before 6.1.16, 7.0.x before 7.0.13, and 7.1.x before 7.1.8 allows remote authenticated users to read arbitrary files via unspecified vectors. |
| GraphicsMagick 1.3.26 is vulnerable to a memory information disclosure vulnerability found in the DescribeImage function of the magick/describe.c file, because of a heap-based buffer over-read. The portion of the code containing the vulnerability is responsible for printing the IPTC Profile information contained in the image. This vulnerability can be triggered with a specially crafted MIFF file. There is an out-of-bounds buffer dereference because certain increments are never checked. |
| The AT&T U-verse 9.2.2h0d83 firmware for the Arris NVG589, NVG599, and unspecified other devices, when IP Passthrough mode is not used, configures an sbdc.ha WAN TCP service on port 61001 with the bdctest account and the bdctest password, which allows remote attackers to obtain sensitive information (such as the Wi-Fi password) by leveraging knowledge of a hardware identifier, related to the Bulk Data Collection (BDC) mechanism defined in Broadband Forum technical reports. |
| In FreeBSD before 11.1-STABLE, 11.1-RELEASE-p4, 11.0-RELEASE-p15, 10.4-STABLE, 10.4-RELEASE-p3, and 10.3-RELEASE-p24, not all information in the struct ptrace_lwpinfo is relevant for the state of any thread, and the kernel does not fill the irrelevant bytes or short strings. Since the structure filled by the kernel is allocated on the kernel stack and copied to userspace, a leak of information of the kernel stack of the thread is possible from the debugger. As a result, some bytes from the kernel stack of the thread using ptrace (PT_LWPINFO) call can be observed in userspace. |
| BOOK WALKER for Windows Ver.1.2.9 and earlier, BOOK WALKER for Mac Ver.1.2.5 and earlier allow an attacker to access local files via unspecified vectors. |
| The vCPU context-switch implementation in Xen through 4.8.x improperly interacts with the Memory Protection Extensions (MPX) and Protection Key (PKU) features, which makes it easier for guest OS users to defeat ASLR and other protection mechanisms, aka XSA-220. |
| An issue was discovered on LG devices using the MTK chipset with L(5.0/5.1), M(6.0/6.0.1), and N(7.0) software, and RCA Voyager Tablet, BLU Advance 5.0, and BLU R1 HD devices. The MTKLogger app with a package name of com.mediatek.mtklogger has application components that are accessible to any application that resides on the device. Namely, the com.mediatek.mtklogger.framework.LogReceiver and com.mediatek.mtklogger.framework.MTKLoggerService application components are exported since they contain an intent filter, are not protected by a custom permission, and do not explicitly set the android:exported attribute to false. Therefore, these components are exported by default and are thus accessible to any third party application by using android.content.Intent object for communication. These application components can be used to start and stop the logs using Intent objects with embedded data. The available logs are the GPS log, modem log, network log, and mobile log. The base directory that contains the directories for the 4 types of logs is /sdcard/mtklog which makes them accessible to apps that require the READ_EXTERNAL_STORAGE permission. The GPS log contains the GPS coordinates of the user as well as a timestamp for the coordinates. The modem log contains AT commands and their parameters which allow the user's outgoing and incoming calls and text messages to be obtained. The network log is a tcpdump network capture. The mobile log contains the Android log, which is not available to third-party apps as of Android 4.1. The LG ID is LVE-SMP-160019. |
| This vulnerability allows remote attackers to disclose sensitive information on vulnerable installations of Foxit Reader 8.3.1.21155. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the tile index member of SOT markers. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-4978. |
| In Mosquitto through 1.4.12, mosquitto.db (aka the persistence file) is world readable, which allows local users to obtain sensitive MQTT topic information. |
| In android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the ISP Camera driver, the contents of an arbitrary kernel address can be leaked to userspace by the function msm_isp_get_stream_common_data(). |
| This vulnerability allows remote attackers to disclose sensitive information on vulnerable installations of Foxit Reader 8.3.1.21155. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of the yTsiz member of SIZ markers. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated object. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of the current process. Was ZDI-CAN-4977. |
| In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the VIDIOC_G_SDE_ROTATOR_FENCE ioctl command can be used to cause a Use After Free condition. |
