| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: Avoid divide by zero in table status in Inline mode
In Inline mode, the journal is unused, and journal_sectors is zero.
Calculating the journal watermark requires dividing by journal_sectors,
which should be done only if the journal is configured.
Otherwise, a simple table query (dmsetup table) can cause OOPS.
This bug did not show on some systems, perhaps only due to
compiler optimization.
On my 32-bit testing machine, this reliably crashes with the following:
: Oops: divide error: 0000 [#1] PREEMPT SMP
: CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959
: EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity]
... |
| In the Linux kernel, the following vulnerability has been resolved:
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Disable KASAN report during patching via temporary mm
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b42 ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: avoid holding freeze_mutex during mmap operation
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/[email protected]
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports. |
| In the Linux kernel, the following vulnerability has been resolved:
block: mark GFP_NOIO around sysfs ->store()
sysfs ->store is called with queue freezed, meantime we have several
->store() callbacks(update_nr_requests, wbt, scheduler) to allocate
memory with GFP_KERNEL which may run into direct reclaim code path,
then potential deadlock can be caused.
Fix the issue by marking NOIO around sysfs ->store() |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: Ensure info->enable callback is always set
The ioctl and sysfs handlers unconditionally call the ->enable callback.
Not all drivers implement that callback, leading to NULL dereferences.
Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c.
Instead use a dummy callback if no better was specified by the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix queue freeze vs limits lock order in sysfs store methods
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal) |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: hub: Ignore non-compliant devices with too many configs or interfaces
Robert Morris created a test program which can cause
usb_hub_to_struct_hub() to dereference a NULL or inappropriate
pointer:
Oops: general protection fault, probably for non-canonical address
0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14
Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110
...
Call Trace:
<TASK>
? die_addr+0x31/0x80
? exc_general_protection+0x1b4/0x3c0
? asm_exc_general_protection+0x26/0x30
? usb_hub_adjust_deviceremovable+0x78/0x110
hub_probe+0x7c7/0xab0
usb_probe_interface+0x14b/0x350
really_probe+0xd0/0x2d0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x6e/0x110
driver_probe_device+0x1a/0x90
__device_attach_driver+0x7e/0xc0
bus_for_each_drv+0x7f/0xd0
__device_attach+0xaa/0x1a0
bus_probe_device+0x8b/0xa0
device_add+0x62e/0x810
usb_set_configuration+0x65d/0x990
usb_generic_driver_probe+0x4b/0x70
usb_probe_device+0x36/0xd0
The cause of this error is that the device has two interfaces, and the
hub driver binds to interface 1 instead of interface 0, which is where
usb_hub_to_struct_hub() looks.
We can prevent the problem from occurring by refusing to accept hub
devices that violate the USB spec by having more than one
configuration or interface. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels
Some lwtunnels have a dst cache for post-transformation dst.
If the packet destination did not change we may end up recording
a reference to the lwtunnel in its own cache, and the lwtunnel
state will never be freed.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks. I'm not sure if rpl and seg6
can actually hit this, but in principle I don't see why not. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Check the return value of of_property_read_string_index()
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix resetting of tracepoints
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
This patch addresses a race condition for an ODP MR that can result in a
CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
[1] From dmesg:
infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error
cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2
WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
[..]
Call Trace:
<TASK>
mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib]
mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x1e1/0x240
zap_page_range_single+0xf1/0x1a0
madvise_vma_behavior+0x677/0x6e0
do_madvise+0x1a2/0x4b0
__x64_sys_madvise+0x25/0x30
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index()
Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index()
where shifting the constant "1" (of type int) by bitmap->mapped.pgshift
(an unsigned long value) could result in undefined behavior.
The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds
31 (e.g., pgshift = 63) the shift operation overflows, as the result
cannot be represented in a 32-bit type.
To resolve this, the constant is updated to "1UL", promoting it to an
unsigned long type to match the operand's type. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: rtl8150: enable basic endpoint checking
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware. |
