| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sandbox escape due to use-after-free in the XPCOM component. This vulnerability was fixed in Firefox 159, Thunderbird 159, Firefox ESR 153.7, and Thunderbird 153.7. |
| Race condition, use-after-free in the DOM: File component. This vulnerability was fixed in Firefox 159, Thunderbird 159, Firefox ESR 153.7, and Thunderbird 153.7. |
| Use-after-free in the JavaScript: GC component. This vulnerability was fixed in Firefox 159, Thunderbird 159, Firefox ESR 153.7, and Thunderbird 153.7. |
| FastNetMon is a high-performance DDoS detector and sensor. In version 1.2.9 and earlier, peer_find_template() in src/netflow_plugin/netflow_collector.cpp and src/netflow_plugin/netflow_v9_collector.cpp returns a pointer into global_netflow9_templates after releasing the cache mutex. On deployments with at least two entries in netflow_ports, concurrent template redefinition and data-flowset processing can let add_update_peer_template() reassign the template and free its records vector while another listener dereferences the escaped pointer. An unauthenticated sender that can reach both NetFlow/IPFIX listener ports can trigger a heap-use-after-free and reliably crash FastNetMon. No fixed release is available as of this review. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does
not reset the length of the largest extent to 0 and update the inode
folio. Since modifications to the extent tree are disallowed afterward,
the cached largest extent may become stale. This can trigger the
following error in xfstests generic/388:
F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix
In the f2fs_drop_inode path, __destroy_extent_node() does not need to
guarantee that et->node_cnt is 0, because concurrency with writeback
is expected in this path, and writeback may update the extent cache.
This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between
extent node destroy and writeback"), and remove the unnecessary zero
check of et->node_cnt. |
| In JetBrains IntelliJ IDEA before 2026.3 code execution was possible in untrusted projects via the Terraform File Watchers |
| In JetBrains IntelliJ IDEA before 2026.3 untrusted projects could trigger changes to GPG agent configuration |
| In JetBrains IntelliJ IDEA before 2026.3 code execution via the document import was possible in untrusted projects |
| In JetBrains IntelliJ IDEA before 2026.3,
2026.2.4 sSRF was possible via annotations.xml files during indexing |
| In JetBrains IntelliJ IDEA before 2026.3 improper checks could enable disabled plugins via external dependency settings |
| In JetBrains IntelliJ IDEA before 2026.3 database connections could be established in untrusted projects |
| In JetBrains IntelliJ IDEA before 2026.3 code execution was possible in Safe Mode via UI Designer form file |
| In JetBrains IntelliJ IDEA before 2026.3,
2026.2.4 code execution was possible in untrusted projects via the Terraform tool path setting |
| In JetBrains IntelliJ IDEA before 2026.3,
2026.2.4,
2026.1.5.1,
2025.3.6.2 code execution was possible in untrusted projects via script engine discovery |
| In JetBrains IntelliJ IDEA before 2026.3 code execution in untrusted projects via a configured ShellCheck path |
| Invalid Pointer Reference in the TimerSettime() system call could allow an attacker with local access to arm a crafted timer event which can cause an information disclosure in the QNX Neutrino kernel. |
| In JetBrains WebStorm before 2026.3,
2026.2.4 code execution was possible in untrusted projects via the Angular CLI schematics loader |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST
matches exact sequence") keeps an established conntrack entry in
ESTABLISHED when an in-window RST does not match the expected sequence
number exactly, so the endpoint can validate the RST with a challenge
ACK.
The timeout selection nevertheless uses the CLOSE timeout for every RST
packet. The bug is that timeout selection is based on the packet type,
not on the state transition result: even when RST validation keeps
new_state in ESTABLISHED, the timeout is still forced to
TCP_CONNTRACK_CLOSE.
Linux TCP independently rate limits challenge ACKs per socket. A second
non-exact RST can therefore arrive after the first challenge ACK has
restored the timeout but before the rate limit expires. The second RST
lowers the timeout to 10 seconds again while the endpoint suppresses the
second challenge ACK, allowing the conntrack entry to expire while both
TCP endpoints remain established.
Using the ESTABLISHED timeout for such RSTs would avoid this short
expiration window, but it could also retain stale entries for the
five-day default because conntrack cannot reliably match the endpoint's
exact TCP state.
Use the UNACK timeout for RST packets that leave the conntrack entry in
TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet
trains still fall through to timeouts[new_state], which preserves the
CLOSE timeout when conntrack accepts the RST as closing the flow.
This avoids the aggressive 10-second expiration window for non-exact
RSTs while preserving the short timeout for RSTs that conntrack accepts
as closing the flow. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: fix use-after-free on lower qdisc drop
The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return
value against NETDEV_TX_OK alone. A slave that consumes the skb but
returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated
as if the skb were still owned, so the loop restores skb->dev and calls
__skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit()
from its ndo_start_xmit() (propagated since cbbef5e18307), and when the
lower qdisc drops the packet that value is NET_XMIT_DROP after the skb
has been freed, giving a use-after-free in teql_master_xmit().
The Fix: test for consumption with dev_xmit_complete(), which accepts
NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that
need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps
the packet counted in tx_packets/tx_bytes and advances the slave; a
consumed result that is neither a success nor NET_XMIT_CN ends the
attempt and is charged to tx_dropped, so lower-qdisc drops are no longer
reported as good transmits. NET_XMIT_CN is counted like success because
it can accompany acceptance of the current packet: pfifo_head_drop drops
the old head, enqueues the current skb and returns NET_XMIT_CN.
Conditions to recreate the bug:
With CONFIG_NET_SCH_TEQL,
CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and
lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0
and a teql0 root on lkrvlan0; bring teql0 up with an address and send one
UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower
qdisc while holding a freed skb. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: Clear prev_fbuf on capture buffer release
A KASAN slab-use-after-free read was reported in submit_audio_out_urb()
when generating an impulse test signal:
BUG: KASAN: slab-use-after-free in create_impulse_test_signal sound/usb/line6/playback.c:76 [inline]
BUG: KASAN: slab-use-after-free in submit_audio_out_urb+0x1848/0x1b20 sound/usb/line6/playback.c:249
Read of size 2 at addr ffff888008d74870 by task syz.2.3214/7785
Allocated by task 11:
kmem_cache_alloc_noprof+0x2f0/0x390 mm/slub.c:4144
line6_buffer_acquire+0x1a1/0x220 sound/usb/line6/pcm.c:158
line6_pcm_acquire+0xb6/0x230 sound/usb/line6/pcm.c:329
line6_startup_work+0x3c/0x50 sound/usb/line6/driver.c:728
Freed by task 7785:
kfree+0xf8/0x390 mm/slub.c:6566
line6_buffer_release sound/usb/line6/pcm.c:176 [inline]
line6_buffer_release+0xa5/0xf0 sound/usb/line6/pcm.c:170
__line6_pcm_release sound/usb/line6/pcm.c:305 [inline]
line6_pcm_release+0x5a/0x80 sound/usb/line6/pcm.c:313
snd_toneport_monitor_put+0x11b/0x190 sound/usb/line6/toneport.c:183
line6pcm->prev_fbuf points into the capture PCM stream buffer
(line6pcm->in.buffer), which is updated during audio_in_callback() to
feed rate synchronization, software monitoring, and impulse test signal
generation on playback side.
When all capture streams are closed, line6_buffer_release() frees
pstr->buffer with kfree(). However, it does not clear line6pcm->prev_fbuf.
If playback is subsequently started (e.g. via impulse test signal
volume control snd_line6_impulse_volume_put()), submit_audio_out_urb()
dereferences the stale pointer line6pcm->prev_fbuf under in.lock,
resulting in a slab-use-after-free read.
Clear prev_fbuf and prev_fsize in line6_buffer_release() when releasing
the capture stream buffer under in.lock, ensuring that no stale buffer
pointer can be accessed by submit_audio_out_urb(). |