| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NoteGen through 0.38.3 contains an external control of file path vulnerability in chat image analysis that allows attackers to read local image files via unvalidated synced sourceUrl paths. Attackers with write access to the victim's sync target can plant absolute paths or file:// URLs, causing image_inspect to send local images to the AI provider. |
| SimplePie through 1.9.0 contains a local file read vulnerability that allows malicious feed servers to read server files by supplying file:// URLs in redirects or autodiscovery links. Attackers can return a Location header or feed link pointing to a file:// path, causing file_get_contents() to read files accessible to the web server process. |
| The Okta RADIUS Agent Windows installer assigns write permissions to the NT SERVICE\ALL SERVICES and CREATOR OWNER security principals on the directories containing the agent configuration, AES encryption key, and logs. These permissions allow any local service account on the host to read the AES encryption key and the encrypted Okta API token. |
| EnergizeLab station-middleware (NestJS) Docker images 1.6.5 through 1.8.2 allow any registered, low-privilege account to read arbitrary files from the server by supplying an attacker-controlled file path. This exposes middleware files and server secrets. |
| Incorrect DBus policy for lomiri-upload-manager (part of lomiri-download-manager) allows arbitrary user to read arbitrary file as root over DBus |
| Incorrect DBus policy for lomiri-download-manager allows arbitrary user to run arbitrary command as root over DBus |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget
hfsc_classify() applies the "filter may only point downwards" level check
only when the filter result carries no bound class. A filter created with
a flowid gets res.class set once at bind time, so the check never runs for
it during classification. hfsc_adjust_levels() can later raise a class's
level without revalidating existing bindings, leaving two binds that were
each legal at bind time pointing at each other; the classify walk then
bounces between two interior classes forever with the qdisc lock held and
BH disabled — a soft lockup from a single packet. The stuck walk trips
the watchdog:
watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444]
RIP: 0010:u32_classify+0x542/0x17f0
...
tcf_classify+0x66/0xa0
hfsc_enqueue+0x166/0xdf0
Bound the traversal with a budget of non-descending hops, the only way a
configured walk can move without descending the class tree once levels
drift after bind time. The budget is cumulative over the whole walk and
is deliberately not reset on a descending hop: a chain that alternates a
descent with a lateral hop would return the budget every lap and never
trip. Descending hops never decrement it, so legitimately deep trees are
unaffected and a terminating lateral chain still classifies normally.
Drop the packet with a rate-limited warning once the budget is exhausted,
mirroring the merged HTB fix.
This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit
htb_classify inner-class filter hops"), which bounded the same classify
loop on the HTB side but left the HFSC walk unbounded.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Build a cycle with two legal-at-bind-time flowid binds and a level
drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2
(sibling of X) with children 1:20 and 1:200; root u32 filter flowid
1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level
rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping
on the device). Unfixed kernel: classify spins with the qdisc lock
held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN). |
| ConvertX through 0.19.0 contains an arbitrary file read vulnerability that allows authenticated users to read server files because src/converters/pandoc.ts invokes Pandoc without the --sandbox flag. Attackers can upload a reStructuredText document with an include directive naming an absolute path, convert it, and download output containing the referenced file's contents. |
| InnoShop 0.9.2 contains a local file disclosure vulnerability that allows authenticated administrators with files_create permission to read server files by abusing the AI Core MCP file_upload tool's source argument. Attackers can supply file:// or php:// stream wrappers passed to file_get_contents(), storing contents on the public media disk to expose the .env file with APP_KEY and database credentials. |
| Gitea creates server-side Git hook directories and scripts with mode 0777 and relies on the process umask to restrict access. With a permissive umask such as 0000 or 0002, another local user who can reach the repository storage may modify a hook or add an executable to a writable hook directory. A later Git operation can execute that file as the Gitea service account. |
| The AsyncHttpClient library allows Java applications to execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, PropertiesBasedResumableProcessor stores resumable download state at the predictable shared path $java.io.tmpdir/ahc/ResumableAsyncHandler.properties with default permissions and link-following file operations. A local user who can read the shared store can see download URLs, including embedded user information or query tokens. A local user who can write within or pre-create the affected shared store directory can plant a symbolic link that the client follows when saving state, truncating and overwriting a target file writable by the client process. The filesystem path is used when ResumableAsyncHandler decorates another AsyncHandler, while the no-argument constructors use a no-op processor and are unaffected. This issue is fixed in versions 2.16.1 and 3.0.12. |
| Incorrect Permission Assignment for Critical Resource vulnerability in Progress MOVEit Transfer.
This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| FreePBX is an open source IP PBX. Prior to versions 16.0.10 and 17.0.5, a critical vulnerability exists in the sound language upload and conversion functionality that allows an authenticated attacker to perform arbitrary file writes, leading directly to remote code execution (RCE). Authentication with a known username is required. The vulnerability stems from insufficient path sanitization in the file conversion process, enabling path traversal attacks that place malicious PHP files in the web server's root directory. This issue has been patched in versions 16.0.10 and 17.0.5. |
| Backstage is an open framework for building developer portals. Prior to 0.3.25, the @backstage/plugin-scaffolder-backend-module-confluence-to-markdown package is affected by improper input validation in confluence to markdown scaffolder module. Insufficient input validation in the Confluence to Markdown scaffolder module could allow an attacker to influence file write operations during template execution. Exploitation requires a Backstage user to run a template that processes attacker-influenced Confluence content. This issue is fixed in version 0.3.25. |
| Incorrect permission assignment for critical resource in Windows Mobile Broadband allows an authorized attacker to elevate privileges locally. |
| A remote code execution vulnerability in ONLYOFFICE Document Server versions before10.0.0 allows an authenticated attacker with a valid Inbox-compatible JWT to execute arbitrary operating system commands as the ds service account. The Document Builder API improperly processes user-controlled converter XML supplied through the optional third argument of builder.SaveFile(). By injecting a duplicate m_sFileTo element, an attacker can override the server-generated output path and write arbitrary content outside the designated job directory. This allows the attacker to overwrite the runtime.json configuration file, modify the Document Builder executable path and arguments, and execute arbitrary commands when a subsequent Document Builder job is processed. |
| The File Upload to Order WordPress plugin before 1.1.4 does not validate or confine a file path taken from attacker-controlled session data before deleting the file, and the action that performs the deletion is reachable by unauthenticated users, allowing them to delete arbitrary files on the server, including files whose removal leads to full site compromise. |
| Insufficient access control in User Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to escape from a virtual machine guest-to-host via local access. |
| Insufficient access control in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables a privileged user to read device configuration information via local access. |
