| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libalpm, as used in pacman 5.0.1, allows remote attackers to cause a denial of service (infinite loop or out-of-bounds read) via a crafted signature file. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| The dynamicGetbuf function in the GD Graphics Library (aka libgd) before 2.2.4 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted TIFF image. |
| Candlepin allows remote attackers to obtain sensitive information by obtaining Java exception statements as a result of excessive web traffic. |
| MACsec feature on Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series does not report errors when a secure link can not be established. It falls back to an unencrypted link. This can happen when MACsec is configured on ports that are not capable of MACsec or when a secure link can not be established. This can mislead customers into believing that a link is secure. On SRX 300 series devices, prior to 15.1X49-D100, MACsec was only supported on control and fabric ports of SRX340 and SRX345 devices. SRX300 and and SRX320 did not have any MACsec capable ports. Configuring MACsec on ports that were not MACsec capable would have resulted in this issue. Affected releases are Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series. |
| A Denial of Service Vulnerability in 802.11 ingress packet processing of the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause the connection table to be full of invalid connections and be unable to process new incoming requests. More Information: CSCvb66659. Known Affected Releases: 8.2(130.0). Known Fixed Releases: 8.2(131.10) 8.2(131.6) 8.2(141.0) 8.3(104.56) 8.4(1.88) 8.4(1.91). |
| The Googlemaps plugin 3.2 and earlier for Joomla! allows remote attackers with control of a sub-domain belonging to a victim domain to cause a denial of service via the 'url' parameter to plugin_googlemap3_kmlprxy.php. NOTE: this vulnerability exists because of an incomplete fix for CVE-2013-7428. |
| The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list. |
| Apache Traffic Server 6.0.0 to 6.2.0 are affected by an HPACK Bomb Attack. |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| node 0.3.2 and URONode before 1.0.5r3 allows remote attackers to cause a denial of service (bandwidth consumption). |
| Incorrect error handling in the set_mempolicy and mbind compat syscalls in mm/mempolicy.c in the Linux kernel through 4.10.9 allows local users to obtain sensitive information from uninitialized stack data by triggering failure of a certain bitmap operation. |
| The ssl-proxy-openssl.c function in Dovecot before 2.2.17, when SSLv3 is disabled, allow remote attackers to cause a denial of service (login process crash) via vectors related to handshake failures. |
| Memory leak in ImageMagick allows remote attackers to cause a denial of service (memory consumption). |
| OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected. |
| The check_allocations function in libass/ass_shaper.c in libass before 0.13.4 allows remote attackers to cause a denial of service (memory allocation failure) via unspecified vectors. |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. |
| The bzread function in ext/bz2/bz2.c in PHP before 5.5.38, 5.6.x before 5.6.24, and 7.x before 7.0.9 allows remote attackers to cause a denial of service (out-of-bounds write) or execute arbitrary code via a crafted bz2 archive. |
| mod_ns in Red Hat Enterprise Linux Desktop 7, Red Hat Enterprise Linux HPC Node 7, Red Hat Enterprise Linux Server 7, and Red Hat Enterprise Linux Workstation 7 allows remote attackers to force the use of ciphers that were not intended to be enabled. |
| Memory leak in the __res_vinit function in the IPv6 name server management code in libresolv in GNU C Library (aka glibc or libc6) before 2.24 allows remote attackers to cause a denial of service (memory consumption) by leveraging partial initialization of internal resolver data structures. |
