| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Autonomic Networking feature of Cisco IOS XE Software could allow an unauthenticated, remote, autonomic node to access the Autonomic Networking infrastructure of an affected system, after the certificate for the autonomic node has been revoked. This vulnerability affected devices that are running Release 16.x of Cisco IOS XE Software and are configured to use Autonomic Networking. This vulnerability does not affect devices that are running an earlier release of Cisco IOS XE Software or devices that are not configured to use Autonomic Networking. More Information: CSCvd22328. Known Affected Releases: 15.5(1)S3.1 Denali-16.2.1. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3. |
| A vulnerability in conditional, verbose debug logging for the IPsec feature of Cisco IOS XE Software could allow an authenticated, local attacker to display sensitive IPsec information in the system log file. The vulnerability is due to incorrect implementation of IPsec conditional, verbose debug logging that causes sensitive information to be written to the log file. This information should be restricted. An attacker who has valid administrative credentials could exploit this vulnerability by authenticating to the device and enabling conditional, verbose debug logging for IPsec and viewing the log file. An exploit could allow the attacker to access sensitive information related to the IPsec configuration. Cisco Bug IDs: CSCvf12081. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| A vulnerability in the access control list (ACL) processing on MPLS interfaces in the ingress direction of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to improper assignment of lookup keys to internal interface contexts. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to access resources behind the affected device that were supposed to be protected by a configured ACL. |
| The Zone-Based Firewall implementation in Cisco IOS 12.4(122)T and earlier does not properly manage session-object structures, which allows remote attackers to cause a denial of service (device reload) via crafted network traffic, aka Bug ID CSCul65003. |
| The Zone-Based Firewall implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers incorrect kernel-timer handling, aka Bug ID CSCuh25672. |
| The IOS Shell in Cisco IOS allows local users to cause a denial of service (device crash) via unspecified commands, aka Bug ID CSCur59696. |
| The ISDN implementation in Cisco IOS 15.3S allows remote attackers to cause a denial of service (device reload) via malformed Q931 SETUP messages, aka Bug ID CSCut37890. |
| The Authentication Proxy feature in Cisco IOS does not properly handle invalid AAA return codes from RADIUS and TACACS+ servers, which allows remote attackers to bypass authentication in opportunistic circumstances via a connection attempt that triggers an invalid code, as demonstrated by a connection attempt with a blank password, aka Bug IDs CSCuo09400 and CSCun16016. |
| Cisco IOS XR 5.1 and earlier allows remote attackers to cause a denial of service (process reload) via a malformed RSVP packet, aka Bug ID CSCuq12031. |
| The Ethernet Connectivity Fault Management (CFM) handling feature in Cisco IOS 12.2(33)SRE9a and earlier and IOS XE 3.13S and earlier allows remote attackers to cause a denial of service (device reload) via malformed CFM packets, aka Bug ID CSCuq93406. |
| Cisco IOS before 15.2(2)E1 on Catalyst switches allows remote attackers to obtain potentially sensitive software-version information via a request to the Network Mobility Services Protocol (NMSP) port, aka Bug ID CSCum62591. |
| Race condition in the Measurement, Aggregation, and Correlation Engine (MACE) implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCul48736. |
| The NTP implementation in Cisco IOS 15.1 and 15.5 and IOS XE 3.2 through 3.17 allows remote attackers to modify the system time via crafted packets, aka Bug ID CSCux46898. |
| The packet-processing microcode in Cisco IOS 15.2(2)EA, 15.2(2)EA1, 15.2(2)EA2, and 15.2(4)EA on Industrial Ethernet 4000 devices and 15.2(2)EB and 15.2(2)EB1 on Industrial Ethernet 5000 devices allows remote attackers to cause a denial of service (packet data corruption) via crafted IPv4 ICMP packets, aka Bug ID CSCuy13431. |
| The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410. |
| Cisco IOS 12.4 and 15.0 through 15.4 and IOS XE 3.1.xS, 3.2.xS, 3.3.xS, 3.4.xS, 3.5.xS, 3.6.xS, and 3.7.xS before 3.7.6S; 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S; and 3.11.xS before 3.12S allow remote attackers to cause a denial of service (device reload) via a crafted SIP message, aka Bug ID CSCul46586. |
