| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
| Russh is a Rust SSH client and server library. Prior to 0.63.2, an authenticated remote peer can send SSH_MSG_KEXINIT without the required SSH_MSG_KEX_ECDH_INIT and then flood SSH_MSG_CHANNEL_OPEN messages while SessionKexState::InProgress prevents priority_receiver in russh/src/server/session.rs from being drained. The server continues processing network input and enqueues a ChannelOpenReply for each request on an unbounded channel, allowing one connection to grow memory until the process is terminated. This issue is fixed in version 0.63.2. |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, a connection configured to permit mac=none can negotiate it with a MAC-requiring CTR or CBC block cipher because the selection logic validates needs_mac() only when MAC selection fails. A remote peer can then send a packet with a decrypted length of zero, causing russh/src/cipher/mod.rs to shrink the previously read block before indexing buffer.buffer[16..], which panics and terminates the connection task. This issue is fixed in version 0.63.1. |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, client_read_authenticated in russh/src/client/encrypted.rs forwards CHANNEL_DATA, CHANNEL_EXTENDED_DATA, CHANNEL_EOF, CHANNEL_CLOSE, CHANNEL_OPEN_FAILURE, CHANNEL_SUCCESS, CHANNEL_FAILURE, and CHANNEL_REQUEST subtypes exit-status, exit-signal, and xon-xoff to public client::Handler callbacks without confirming that the ChannelId belongs to a channel the client opened and established. A malicious SSH server can send lifecycle events for predicted, unopened, unconfirmed, or released channel identifiers, causing application panics or corrupting command completion and exit-code tracking. This issue is fixed in version 0.63.1. |
| Russh is a Rust SSH client and server library. Prior to 0.63.0, the hybrid ML-KEM 768 and X25519 implementation in russh/src/kex/hybrid_mlkem.rs accepts an all-zero 32-byte peer X25519 public key in both server_dh and compute_shared_secret, forcing the X25519 contribution to the combined shared secret to zero. A malicious SSH peer can therefore make the combined secret depend only on ML-KEM, defeating the hybrid exchange's intended fallback protection if ML-KEM is later weakened. This issue is fixed in version 0.63.0. |
| Russh is a Rust SSH client and server library. Prior to 0.62.6, the USERAUTH_REQUEST path reached from server::run_stream in russh/src/server/encrypted.rs increments self.common.auth_attempts but never compares it with server::Config.max_auth_attempts. An unauthenticated remote client can continue submitting authentication requests on one connection beyond the configured cap, bypassing the deployment's attempt-limiting policy and increasing online guessing opportunity and backend authentication workload. This issue is fixed in version 0.62.6. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. From 3.15.0 until 4.0.1, the default blockUnsafeOperationsPlugin does not classify trailer.<token>.cmd as unsafe configuration. An application that passes attacker-controlled values through SimpleGitOptions.config or inline -c arguments can therefore allow Git to invoke an attacker-selected shell command when git interpret-trailers processes the configured trailer. The command executes with the operating-system identity and permissions of the Node.js process. This issue is fixed in 4.0.1. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 2.0.1 of the argv-parser package, parseEnv omits VISUAL from GitEnvKeys, so prepareEnv drops the value before vulnerabilityCheck can classify it as allowUnsafeEditor. A consuming application that forwards attacker-influenced environment values can therefore allow Git to invoke an attacker-selected editor during operations such as commit amendment or interactive rebase when no higher-priority editor setting overrides VISUAL and Git's terminal prerequisites are met. The executable runs with the privileges of the Node.js process. This issue is fixed in argv-parser 2.0.1. |
| U-Boot before 2026.10-rc5 contains out-of-bounds memory access in dhcp6_parse_options() that fails to validate SERVERID and CLIENTID option lengths from DHCPv6 packets. Attackers on the local network can send crafted DHCPv6 ADVERTISE or REPLY packets during netboot to corrupt memory and crash the bootloader. |
| U-Boot before 2026.10-rc5 contains a use-after-free vulnerability in the httpc_recv_cb() function within the lwIP wget implementation. When HTTP data storage fails, the callback frees the connection PCB but returns ERR_BUF instead of ERR_ABRT, causing the TCP input path to access released memory and crash the bootloader. |
| U-Boot before 2026.10-rc5 contains a buffer overflow in nfs_readlink_reply() function in net/nfs-common.c when processing NFS server responses. A malicious NFS server can send crafted READLINK replies with negative or oversized symlink length values to corrupt memory and crash the bootloader. |
| U-Boot before 2026.10-rc5 contains a buffer overflow in nfs_read_reply() function in net/nfs-common.c that allows attackers to corrupt memory by supplying crafted NFS READ reply lengths. A malicious NFS server can exploit signed integer handling to bypass length validation and write far past the destination buffer, crashing the bootloader or corrupting memory. |
| U-Boot before 2026.10-rc4 contains an integer overflow vulnerability in sqfs_read_directory_table() function when allocating the directory table buffer. Attackers can supply a crafted SquashFS image with an attacker-controlled superblock metablks_count value that causes heap buffer under-allocation and out-of-bounds writes, corrupting heap memory and crashing the bootloader. |
| U-Boot before 2026.10-rc3 with CONFIG_IP_DEFRAG enabled contains an out-of-bounds write vulnerability in the __net_defragment() function in net/net.c. Remote attackers can send a crafted IP fragment with non-zero offset and More-Fragments flag set during netboot to corrupt adjacent memory and crash the bootloader. |
| The "supplier_no" parameter used in the business allocation search feature is vulnerable to time-based blind SQL injection. |
| The TMS file upload endpoint fails to enforce server-side file type restrictions, allowing an attacker to upload and execute arbitrary PHP files on the web server. |
