| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1. |
| GNU Emacs for Android is vulnerable to an integer overflow in sfnt_read_name_table() in src/sfnt.c. The function computes an allocation size using a 32-bit length value from a TrueType font file without overflow checking. On 32-bit targets, a crafted font causes the calculation to wrap, resulting in an undersized heap allocation. A subsequent read() call writes beyond the buffer, causing a heap buffer overflow. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This can lead to heap memory corruption and potential code execution.
This issue was fixed in commit d51a4722316efe0960994d371e1859099894d1ca |
| GNU Emacs for Android is vulnerable to an integer overflow in the sfnt_read_cmap_format_12() function in src/sfnt.c. When processing a crafted TrueType font file, an unguarded addition in the xmalloc allocation call wraps around on 32-bit builds, causing a heap buffer overflow write. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This results in heap memory corruption that can lead to code execution.
This issue was fixed in commit c4e20777c26548722a37b03db93243e83a0d6188 |
| GNU Emacs for Android contains an off-by-one error in the gvar table parser in src/sfnt.c. The shared-coordinate index boundary check in sfnt_vary_simple_glyph() and sfnt_vary_compound_glyph() uses a strict greater-than comparison instead of greater-than-or-equal, allowing a crafted TrueType variable font to bypass the check and trigger a heap-based out-of-bounds read via memcpy. An attacker can deliver a malicious font file via email, EWW (Emacs Web Wowser), or documents with custom faces, causing Emacs to load it. This exposes heap memory contents which can be later used to defeat ASLR.
This issue was fixed in commit 95ab9ef627b212d74d321c5bbb5b56a1be7b9fbe |
| Vulnerability in the Oracle Agile Engineering Data Management product of Oracle Supply Chain (component: Core). The supported version that is affected is 6.2.1. Easily exploitable vulnerability allows low privileged attacker with network access via TCP to compromise Oracle Agile Engineering Data Management. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Agile Engineering Data Management. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| Vulnerability in the Oracle Agile Engineering Data Management product of Oracle Supply Chain (component: Install). The supported version that is affected is 6.2.1. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile Engineering Data Management. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Agile Engineering Data Management. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| SiYuan versions before v3.7.4 fail to enforce publish-access checks on getBlockBreadcrumb, getRefText, and getBlockTreeInfos endpoints, allowing disclosure of protected document content and metadata. Anonymous readers or publish RoleReader accounts can retrieve document titles, ancestor block content snippets, reference text, and path metadata for publish-forbidden or password-protected documents by supplying block IDs. |
| A stored cross-site scripting (XSS) vulnerability in cube-root/directory-serve through 1.3.7 allows an attacker to inject arbitrary JavaScript into the web interface by uploading a file with a crafted filename containing HTML attribute-breaking characters. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task
ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final
ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the
custody update and ops.dequeue() precede it. A task can thus be found on a
DSQ while still SCX_OPSS_DISPATCHING.
The dequeue and core-sched pick paths wait for the state to clear in
ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs
ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed.
The dispatcher's final store then overwrites it with SCX_OPSS_NONE and
finish_dispatch() drops every later dispatch of the task.
Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for
reenqueue, the same way ops_dequeue() does. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the logical key offset from persistent memory
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree->subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Infer zext_dst based on static register liveness analysis
As reported in the thread [1], the verifier's 32-bit operations zero
extension logic is broken. This logic is responsible for correct
semantics of 32-bit operations on s390 architecture.
According to BPF semantics, operation `w1 += 1` is supposed to zero
extend the upper half of the register `r1`. On s390 the JIT relies on
the verifier emitting explicit zero extension before such operations.
The verifier attempts to minimize the amount of zero extensions
inserted by tracking whether upper halves of the 64-bit registers are
ever used. Previously such tracking worked as follows:
- bpf_reg_state->subreg_def field was set by do_check_insn()
for each operation defining lower but not the upper halves
of the register.
- Whenever an operation reading the whole register was verified,
the verifier checked register's subreg_def and set
bpf_insn_aux_data->zext_dst flag as true via a call to
mark_insn_zext() function.
- After the verification was complete, a special pass
bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations
with bpf_insn_aux_data->zext_dst set as true by adding
explicit zero extension.
Note that the logic above relies on bpf_reg_state->subreg_def,
which is a property of a current verifier state.
Before the commit [2] two additional steps happened:
- The verifier tracked upper and lower register halves' liveness as
flags REG_LIVE_READ{32,64} in bpf_reg_state->live.
- The function propagate_liveness() called mark_insn_zext()
in order to transfer the knowledge about which registers have
their upper halves alive (and thus might require zero extension).
The commit [2] removed the two steps described above,
hence making possible a situation like below:
- The register's upper half is set and is used on some verification
path P1 and the register happens not to be marked as precise.
- The checkpoint C is created while processing some instruction
between register initialization and usage.
- On some other verification path P2 the register's upper half is not
initialized and that path ends hitting the checkpoint C.
- In such a case the register's initialization on path P2 would lack
zext_dst mark, making it possible for the program to inject
an arbitrary value in the register's upper half.
This commit replaces subreg_def based logic with computing zext_dst
statically, as a part of the bpf_compute_live_registers() analysis:
- The analysis now tracks usage of upper and lower halves of the
registers separately.
- If some instruction defines a 32-bit subregister, but not the whole
register, *and* the upper half of the register is alive after that
instruction, the instruction is marked as zext_dst.
There is one notable drop in precision: whenever a BPF subprogram is
called, all 64 bits of parameter registers are presumed to be used.
The assumption is that such a drop in precision would not inflict
a noticeable performance penalty.
[1] https://lore.kernel.org/bpf/CAGKGUv=sOuqQtA1Ub-5JXfA4FPosJFYKAQE4B79cK+P1erxqtg@mail.gmail.com/
[2] commit 107e16979905 ("bpf: disable and remove registers chain based liveness") |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix XDR padding calculation in ff_encode_getdeviceinfo
nfsd4_ff_encode_getdeviceinfo() computes the da_addr_body reservation
as 16 + netid_len + addr_len, but the subsequent xdr_encode_opaque()
calls emit 8 + round_up(netid_len, 4) + round_up(addr_len, 4) bytes.
The mismatch means the declared da_addr_body length exceeds the actual
encoded data by 2-8 bytes on every flexfile GETDEVICEINFO reply,
leaking stale reply-page content to the client and mis-aligning the
subsequent version list decode.
Use xdr_align_size() for each string length to match what
xdr_encode_opaque() actually writes. |
| In the Linux kernel, the following vulnerability has been resolved:
llc: fix skb UAF and leaks on llc_mac_hdr_init() failure
In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init()
fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks
the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu),
and double-frees skb when llc_conn_state_process() drops its reference.
In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is
leaked if llc_mac_hdr_init() returns an error.
Free nskb in all three error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: discard the rest of the packet on a stale-cookie error
When an association is in COOKIE-ECHOED state and the peer sends a
bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary
addresses, processing the ERROR chunk takes the non-fatal stale-cookie
retry path sctp_sf_do_5_2_6_stale(), which queues
SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive.
sctp_cmd_del_non_primary() removes every non-primary transport -
including the very transport this packet arrived on, which is still
referenced by the receive lookup and shared by all chunks of the
packet via chunk->transport.
sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from
the removed transport, but right afterwards the bundled DATA chunk
makes sctp_assoc_bh_rcv() re-register
asoc->peer.last_data_from = chunk->transport unconditionally, undoing
the redirection with the just-removed transport.
Once the packet is done, the receive reference is dropped and the
transport is RCU-freed, while the surviving association keeps the
dangling last_data_from. A later FWD-TSN (or the delayed SACK timer)
makes sctp_gen_sack() dereference it (->param_flags and friends), and
sctp_make_sack()/sctp_outq_select_transport() may write to the freed
object and link it into the live transport list. This is a
use-after-free triggerable by any malicious SCTP peer (or a local
unprivileged user acting as one) with no capabilities required:
BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660
Read of size 4 at addr ffff88800e1e356c by task poc/115
Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <-
sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv
Allocated: sctp_transport_new <- sctp_assoc_add_peer <-
sctp_process_init (INIT-ACK processing)
Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core
(call_rcu queued by sctp_transport_put at end of sctp_rcv)
The buggy address is located 364 bytes inside of freed 1024-byte
region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k
Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport
was removed") only covers the window between the receive lookup and
the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog);
here the transport is removed *while* the packet is being processed,
by an earlier chunk of the same packet, so the drop in sctp_inq_push()
does not reach this path. Verified with the bundled [ERROR(Stale
Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still
fires with that commit applied, and is gone with this patch on top.
Fix it by discarding the rest of the packet on this path, as suggested
by Xin. After the stale-cookie ERROR has sent the association back to
COOKIE-WAIT and removed the non-primary transports, the remaining
chunks of the packet can only run against the restarted handshake
while referencing the removed arrival transport through
chunk->transport: besides the last_data_from registration above,
sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also
copy that pointer into association-lifetime state that
sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit
them, in line with what sctp_inq_push() does for chunks whose
transport was removed before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
