| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate DFS referral PathConsumed
parse_dfs_referrals() validates that the response contains the fixed
referral entry array and, on for-next, the per-referral string offsets.
However, the response also contains a PathConsumed value that is later
used for DFS path parsing.
If a malformed response provides a PathConsumed value larger than the
search name, later DFS parsing can advance beyond the end of the path.
Validate PathConsumed against the search name length before storing it in
the parsed referral. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Clear memdump state on invalid dump size
qca_controller_memdump() allocates qca->qca_memdump before processing
the first dump packet. For a sequence-zero packet it then disables IBS,
marks memdump collection active, and reads the advertised dump size.
If the controller reports a zero dump size, the error path frees the
local qca_memdump object and returns without clearing qca->qca_memdump
or undoing the collection state. A later memdump work item initializes
its local pointer from qca->qca_memdump and skips allocation when that
pointer is non-NULL, so it can operate on freed memory. The stale
collection and IBS-disabled flags can also leave waiters or later
transmit handling blocked behind an aborted dump.
Clear the saved pointer and memdump state before returning from the
invalid-size path, matching the cleanup used when hci_devcd_init() fails.
A static analysis checker reported the stale memdump state, and manual
source review confirmed the invalid-size failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix memory leak in helper_firmware_cb()
helper_firmware_cb() neglects to free the single-stage firmware image
after a successful async load, leading to a memory leak in the USB
firmware-download path.
Fix this memory leak by calling release_firmware() immediately after
lbs_fw_loaded() returns.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
the current wireless tree.
An x86_64 allyesconfig build showed no new warnings. As we do not have
compatible Libertas USB hardware for exercising this firmware-download
path, no runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix stale skb->prev after async crypto steals a GSO segment
skb_gso_segment() leaves the segment list head with ->prev pointing at
the last segment, an invariant validate_xmit_skb_list() relies on when
it sets its tail pointer (tail = skb->prev).
When validate_xmit_xfrm() walks a GSO list and some segments are stolen
by async crypto (->xmit() returns -EINPROGRESS), those segments are
unlinked from the list but the head ->prev is never updated. If the
last segment is the one stolen, the returned head still has ->prev
pointing at it, even though it is now owned by the crypto engine and may
be freed. validate_xmit_skb_list() later does tail->next = skb, writing
through that stale pointer -- a use-after-free.
Repoint skb->prev at the last retained segment before returning. |
| Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's `/$result` endpoint allows a caller who can obtain any valid async export job ID to supply `file` parameter values containing path traversal sequences. The handler verifies only the supplied `job` and never normalises or confines the requested `file` path to that job's `jobs/<jobId>` directory before opening it as a filesystem resource. Because async export scratch space lives under the same warehouse database root as persisted resource tables, an attacker can use their own export job to read other files from the warehouse. This is fixed in Pathling Server 2.0.0. As an interim mitigation, disable the async export operations (`pathling.operations.exportEnabled`, `patientExportEnabled`, `groupExportEnabled`, `bulkSubmitEnabled`) or enable authentication and restrict export capability to trusted callers. |
| A security vulnerability has been detected in HKUDS nanobot up to 0.2.1. Impacted is the function ExecTool._guard_command/ExecTool._spawn of the file nanobot/agent/tools/shell.py of the component Shell Allowlist Handler. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.3.0 is recommended to address this issue. The name of the patch is 4562. It is advisable to upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "These five reports are variants of the same root cause: validation of shell commands containing multiple segments, wrappers, comments, or chained commands. The issue was fixed by validating every executable shell segment against the configured allowlist". |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bound the early ACPI HID map
The ivrs_acpihid command-line parser appends entries to a fixed
four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET
parsers, it does not reject a fifth entry before incrementing the map size.
Check the capacity at the common found label before parsing the HID and
UID or writing the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: port: Deattach Type-C connector on component unbind
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: take a reference on the socket found in afiucv_hs_rcv()
afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock,
drops the lock, and then passes the socket to the afiucv_hs_callback_*()
handlers without holding a reference. AF_IUCV sockets are not
RCU-protected and are freed synchronously by iucv_sock_kill() ->
sock_put(), so a concurrent close can free the socket in the window
between read_unlock() and the handler, which then dereferences freed
memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()).
Take a reference with sock_hold() while the socket is still on the list
and release it with sock_put() once the handler has run. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit()
Sashiko (locally) reports multiple out-of-bound issues in
ffa_setup_and_transmit:
1) Writing ep_mem_access->reserved can write out of bounds for FFA
versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case
while reserved has an offset of 24.
Instead of zeroing fields, memset the struct to zero first based on
the FFA version.
2) Make sure there is enough size to write constituents.
While at it, convert the only sizeof() in the driver that uses a
type instead of variable. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: bound element ID read when checking non-inheritance
cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: reject optional IPTFS templates in outbound policies
syzbot reported a stack-out-of-bounds read in xfrm_state_find()
which flows from xfrm_tmpl_resolve_one().
Commit 3d776e31c841 ("xfrm: Reject optional tunnel/BEET mode
templates in outbound policies") disallowed optional tunnel and
BEET in outbound policies to prevent this. Later when IPTFS
added, it was not covered by that fix and can still trigger
the out-of-bounds read;
Extend the check to disallow optional IPTFS in outbound policies
as well. IPTFS should be identical to tunnel mode.
IN and FWD policies are not affected: xfrm_tmpl_resolve_one()
is only reachable via the outbound path.
Reproducer, before:
ip link add dummy0 type dummy
ip link set dummy0 up
ip addr add 10.1.1.1/24 dev dummy0
ip xfrm policy add src 10.1.1.1/32 dst 10.1.1.2/32 dir out tmpl
src fc00::dead:1 dst fc00::dead:2 proto esp reqid 1 mode iptfs
level use tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid
2 mode transport
ping -W 1 -c 1 10.1.1.2
PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data.
[ 64.168420] ==================================================================
[ 64.169977] BUG: KASAN: stack-out-of-bounds in __xfrm6_addr_hash+0x11e/0x170
[ 64.169977] Read of size 4 at addr ffff88800e1ffd20 by task ping/2844
[ 64.169977] CPU: 2 UID: 0 PID: 2844 Comm: ping Not tainted 7.1.0-rc7-00180-geb23b588430a #98 PREEMPT(full)
[ 64.169977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 64.169977] Call Trace:
[ 64.169977] <TASK>
[ 64.169977] dump_stack_lvl+0x47/0x70
[ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170
[ 64.169977] print_report+0x152/0x4b0
[ 64.169977] ? ksys_mmap_pgoff+0x6d/0xa0
[ 64.169977] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 64.169977] ? rcu_read_unlock_sched+0xa/0x20
[ 64.169977] ? __virt_addr_valid+0x21b/0x230
[ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170
[ 64.169977] kasan_report+0xa8/0xd0
[ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170
[ 64.169977] __xfrm6_addr_hash+0x11e/0x170
[ 64.169977] __xfrm_dst_hash+0x24/0xc0
[ 64.169977] xfrm_state_find+0xa2d/0x2f90
[ 64.169977] ? __pfx_xfrm_state_find+0x10/0x10
[ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10
[ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10
[ 64.169977] xfrm_tmpl_resolve_one+0x210/0x570
[ 64.169977] ? __pfx_xfrm_tmpl_resolve_one+0x10/0x10
[ 64.169977] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 64.169977] ? kernel_text_address+0x5b/0x80
[ 64.169977] ? __kernel_text_address+0xe/0x30
[ 64.169977] ? unwind_get_return_address+0x5e/0x90
[ 64.169977] ? arch_stack_walk+0x8c/0xe0
[ 64.169977] xfrm_tmpl_resolve+0x130/0x200
[ 64.169977] ? __pfx_xfrm_tmpl_resolve+0x10/0x10
[ 64.169977] ? __pfx_xfrm_policy_inexact_lookup_rcu+0x10/0x10
[ 64.169977] ? __refcount_add_not_zero.constprop.0+0xb2/0x110
[ 64.169977] ? __pfx___refcount_add_not_zero.constprop.0+0x10/0x10
[ 64.169977] xfrm_resolve_and_create_bundle+0xd5/0x310
[ 64.169977] ? __pfx_xfrm_resolve_and_create_bundle+0x10/0x10
[ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10
[ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10
[ 64.169977] xfrm_lookup_with_ifid+0x3d8/0xb80
[ 64.169977] ? __pfx_xfrm_lookup_with_ifid+0x10/0x10
[ 64.169977] ? ip_route_output_key_hash+0xc6/0x110
[ 64.169977] ? kasan_save_track+0x10/0x30
[ 64.169977] xfrm_lookup_route+0x18/0xe0
[ 64.169977] ip4_datagram_release_cb+0x4c9/0x530
[ 64.169977] ? __pfx_ip4_datagram_release_cb+0x10/0x10
[ 64.169977] ? do_raw_spin_lock+0x71/0xc0
[ 64.169977] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 64.169977] release_sock+0xb0/0x170
[ 64.169977] udp_connect+0x43/0x50
[ 64.169977] __sys_connect+0xa6/0x100
[ 64.169977] ? alloc_fd+0x2e9/0x300
[ 64.169977] ? __pfx___sys_connect+0x10/0x10
[ 64.169977] ? preempt_latency
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx()
put_prev_task_scx() warns when a runnable task drops to a lower sched_class
without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have
kept it running. Core scheduling breaks that: a forced-idle SMT sibling
reschedules through the core_pick fast path in pick_next_task(), which skips
pick_task_scx() and thus balance_one(), so a runnable task can drop to idle
with ENQ_LAST unset.
Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core
scheduling forced the idle, while a match (or core scheduling off) still
catches a genuine missing-ENQ_LAST drop. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mad: Drop unmatched RMPP responses before reassembly
Kernel-handled RMPP receive processing starts reassembly for active
DATA responses before the response is matched to an outstanding send.
The normal match happens later, after ib_process_rmpp_recv_wc() has
either assembled a complete message or consumed the segment.
That ordering lets an unsolicited response that routes to a kernel
RMPP agent by the high TID bits allocate or extend RMPP receive state
before the full TID and source address are checked against a real
request. A reordered burst can therefore reach the receive-side
insertion path even though the response would not match any send.
For kernel-handled RMPP DATA responses, require the existing
ib_find_send_mad() match before entering RMPP reassembly. The matcher
already checks the full TID, management class and source address/GID
against the agent wait, backlog and in-flight send lists. If there is
no match, drop the response without creating RMPP state.
This leaves the RMPP window behavior unchanged and only rejects
responses that have no corresponding request. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix use-after-free in host1x_bo_clear_cached_mappings
__host1x_bo_unpin() drops the last reference to the mapping and frees
it, so we can't dereference mapping afterwards. The cache itself
outlives the mapping, so use the cache local variable instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: defer link RX stats percpu free to RCU
sta_remove_link() frees a removed MLO link's RX stats percpu buffer right
away, but defers only the link container to RCU:
sta_info_free_link(&alloc->info);
kfree_rcu(alloc, rcu_head);
The RX fast path reads link_sta under rcu_read_lock and writes the percpu
stats. A reader that resolved link_sta before the removal keeps the
pointer. The container stays alive from the kfree_rcu, so the read still
works. But the percpu block it points to is already freed. This needs
uses_rss. That is when pcpu_rx_stats exists.
The full STA teardown frees the deflink stats only after
synchronize_net(). The link removal path had no such barrier. The race is
hard to win in practice, but the free should still wait for RCU.
Free the link together with its data from a single RCU callback, so the
percpu block is reclaimed only after readers drain. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan()
If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks.
Use the existing error handling path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one()
The memory allocated in the ipw2100_alloc_device() function is not freed
in some of the error paths in ipw2100_pci_init_one(). Fix that by
converting the direct return into a goto to the error path return.
The error path when pci_enable_device() fails cannot jump to fail, since
at this point priv is not set, so perform error handling inline. |
