| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too. |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, the broker does not enforce a maximum length for pending per-session message queues. When a fast publisher sends messages to a slow subscriber whose in-flight window is full, queued messages can accumulate without bound in memory or persistent storage. Remote clients can use this condition to exhaust broker resources and cause a denial of service. This issue is fixed in version 0.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: rework FDB management on the bridge leave path
On bridge leave, the dpaa2_switch_port_set_fdb() function always
allocates a new FDB for the port which is becoming standalone. In case
no FDB is found, then the port leaving a bridge will continue to use the
current one.
The above logic does not cover the case in which there are multiple
bridges which have ports from the same DPSW instance. In this case, when
the last port leaves bridge #1, it finds an unused FDB to switch to, but
the old FDB is not marked as unused. Since the number of FDBs is equal
to the number of DPSW interfaces, this will eventually lead to multiple
ports sharing the same FDB.
Fix this by changing how we are managing the FDBs on the leave path.
Instead of directly allocating a new FDB, first verify if the current
port is the last one to leave a bridge. If this is the case, then
continue to use the current FDB and only allocate another FDB if there
are other ports remaining in the bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Prevent queuing new commands if xhci is inaccessible
Refuse to queue a new command on the command ring if xHC is marked
inaccessible with the HCD_FLAG_HW_ACCESSIBLE.
HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume.
Also print a warning if xhci is being suspended with commands
still pending on the command ring. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry.
If any subsequent ndr_write_*() call returns error during encoding,
the allocated sd_ndr.data won't be freed and causes memory leak.
Move kfree(sd_ndr.data) into out label to ensure the buffer gets
released on all success and error return paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling
1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data
which only freed n.data, skipping kfree(acl.sd_buf) and leaking
the buffer. Zero-initialize struct xattr_ntacl acl, reorder error
labels to out_free to release acl.sd_buf on all error paths.
2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code
returned success without freeing sd_buf and left stale *pntsd.
Set rc = -EINVAL before jumping to out_free to return error code and
free buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy(). |
| A pre-authentication attacker could leverage type size/count handling to cause excessive allocation leading to potential denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| Docmost is open-source collaborative wiki and documentation software. From 0.21.0 until 0.95.0, any authenticated workspace member with edit rights to a space can upload an archive to the page-import feature whose ZIP extraction routine does not limit total uncompressed size, per-entry size, or entry count. The extractor writes entries to the server temp directory and automatically extracts one nested ZIP, allowing an outer upload within the default 200 MB limit to expand by multiple GB. The resulting disk exhaustion can crash the import worker and degrade or take down the instance for all tenants. This issue is fixed in version 0.95.0. |
| Dell ThinOS 10, versions prior to 2605_10.2616, contain an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Remote Code execution |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| nginx ignition is a user interface for the nginx web server. In versions 2.29.0 through 2.40.0, the gin i18n middleware in nginx-ignition's API server runs in front of every HTTP request and calls `golang.org/x/text/language.ParseAcceptLanguage` on the raw `Accept-Language` header without imposing any size or shape filter. The underlying parser has quadratic-time behaviour on long lists of malformed language tags. The CVE-2022-32149 guard that golang.org/x/text added in v0.3.8 caps the number of `-` characters in the input at 1000, but it does not cap `_` characters even though the parser's internal scanner aliases `_` to `-` before parsing. A single unauthenticated GET request with an `Accept-Language` header built out of `_` separators burns about 2.4 seconds of server CPU on the host running nginx-ignition; ten concurrent attackers saturate a ten-core box for the duration of the attack while consuming ~10 MiB/s of upstream bandwidth. Version 2.40.1 fixes this issue. |
| Plug.Parsers.MULTIPART, the multipart request-body parser used to handle file uploads and multipart forms, does not enforce its :length budget against all consumed resources, allowing an unauthenticated remote attacker to cause denial of service. The parser charges the :length limit only for part body bytes; part header bytes are never counted, and a part with an empty body costs zero.
Because every part whose Content-Disposition carries a non-empty filename creates a fresh temporary file (via Plug.Upload) and retains a Plug.Upload struct for the duration of the request, an attacker can send a single request composed of many empty-body file parts. Such a request stays well under the configured :length limit (8,000,000 bytes by default) while creating one temporary file per part, leading to inode and disk exhaustion and unbounded memory growth. Any application using Plug.Parsers with the :multipart parser is affected, and no authentication is required, only reachability of a multipart endpoint over HTTP.
This vulnerability is associated with program files lib/plug/parsers/multipart.ex and program routines Plug.Parsers.MULTIPART.parse_multipart/2, Plug.Parsers.MULTIPART.parse_multipart_headers/5, Plug.Parsers.MULTIPART.parse_multipart_body/4, and Plug.Parsers.MULTIPART.parse_multipart_file/4.
This issue affects plug: from 1.4.0-rc.0 before 1.16.6, from 1.17.0 before 1.17.4, from 1.18.0 before 1.18.5, from 1.19.1 before 1.19.5, and from 1.20.0 before 1.20.3. |
