| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incorrect implementation of message filtering in xdg-dbus-proxy versions before 0.1.9 allows an attacker to bypass the intended message filtering on the D-Bus session bus by setting a reply serial number on non-reply messages. A malicious or compromised Flatpak app could use this to achieve arbitrary code execution outside its sandbox. |
| Improper OCSP response validation in the Snowflake Python, Go, JDBC, and Node.js drivers allowed a revoked TLS certificate to be accepted as valid, because OCSP responses were not reliably bound to the certificate being validated and definitive verification failures were treated as transient. A man-in-the-middle attacker holding a revoked certificate and its private key for a Snowflake or stage hostname could cause the driver to establish a TLS session to the attacker-controlled endpoint anyway, allowing the attacker to read and modify data transmitted within that connection. Successful exploitation requires that on-path position and the corresponding private key, and impact is limited to data carried within the intercepted connection. The fix is available in Snowflake Connector for Python v4.7.3, Snowflake Go Driver v2.2.0, Snowflake JDBC Driver v4.3.4 (including the snowflake-jdbc-fips and snowflake-jdbc-thin), and Snowflake Node.js Driver v3.3.0. Users must manually upgrade. |
| Contrast before 1.16.0 is susceptible to remote attestation relay attacks. Contrast accepted any TEE attestation report that verified correctly and contained the expected firmware patch levels and software measurements, regardless of which machine produced it, so attestation was not bound to specific, physically trusted hardware. An attacker who can both intercept network traffic between the CLI and the Coordinator (or between the Coordinator and an attested component) and forge reports or extract secrets from any single TEE machine under their physical control can relay such a report to impersonate a Contrast Coordinator or a Contrast workload, defeating identity verification in Contrast's attested TLS (aTLS). |
| wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificate. wolfSSL incorrectly accepted certificates for hostnames they shouldn't be allowed to cover, due to a chain-walking state-machine bug that resets the validation state when encountering an intermediate without NameConstraints, thereby bypassing cryptographic delegation controls. This defect exists in the default build configuration that makes use of certificates where name constraint extensions are used. Thanks to Jack Lloyd, PathDiff, and Ben Smyth for reporting the issue. |
| When an application enables both OCSP and CRL revocation checking on one WOLFSSL_CTX or certificate manager, wolfSSL skips the CRL check for any peer certificate that carries no Authority Information Access OCSP URL, and accepts a certificate the loaded CRL lists as revoked. The soft-fail policy for a missing responder collapses the OCSP result onto success before the code decides whether the CRL fallback is still needed, so "no responder exists" becomes indistinguishable from "the responder answered good". Affected builds define both HAVE_OCSP and HAVE_CRL: --enable-ocsp --enable-crl directly, and implicitly --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-lighty, --enable-wpas, --enable-strongswan, --enable-mosquitto, --enable-jni, --enable-openvpn and --enable-krb. An application is affected only if it calls both wolfSSL_CTX_EnableOCSP() (or wolfSSL_EnableOCSP() / wolfSSL_CertManagerEnableOCSP()) and wolfSSL_CTX_EnableCRL() (or the equivalents) with a CRL loaded; an application that uses OCSP stapling alone through wolfSSL_CTX_EnableOCSPStapling() is not affected, because that sets up a separate OCSP instance. The defect sits in ProcessPeerCerts() and is reachable over TLS 1.0 through TLS 1.3 and DTLS, both on a client verifying a server certificate and on a server verifying a client certificate under mutual or post-handshake authentication. When the skipped check falls on a chain certificate rather than the leaf, the unchecked intermediate is promoted into the certificate manager and stays a trusted signer for every later connection on that context, so an affected long-running process needs its WOLFSSL_CTX torn down and not only its library replaced. All wolfSSL versions from 5.9.2 and earlier are affected; on versions 5.9.1 and 5.9.2 the WOLFSSL_OCSP_CHECKALL configuration fails closed with OCSP_NEED_URL, which leaves wolfSSL_CTX_EnableOCSP() without CHECKALL as the exposed configuration on 5.9.2. |
| MatchTrustedPeer ignores the public key used, leading to forged CA clones passing verification. Affected builds are any that enable the macro WOLFSSL_TRUST_PEER_CERT and load CA certificates with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert(). The peer must know the certificates being loaded to either of those APIs to take advantage of the issue. When OPENSSL_COMPATIBLE_DEFAULTS is also defined this widens the affected API to include all CA certificate loading. Both macros are defined when using autoconf builds such as (nginx, haproxy, stunnel, wpas, apache httpd, hitch, bind, rsyslog, ffmpeg, all, distro). When the certificate is listed as a trusted peer certificate the issue previously allowed for a malicious (D)TLS server to bypass authentication once knowing which CA’s the client would accept. This also affects mutual authentication cases where the client knows which CA’s the server has loaded. If building with any of these configurations and using (D)TLS where the loaded CA’s could be known and authentication of the peer is desired, users should either: update to the latest wolfSSL version, apply the fix patch, or use the configure flag --disable-openssl-compatible-defaults and not load CA’s with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert() to mitigate the issue. |
| A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of wolfSSL with the macros (OPENSSL_EXTRA && !NO_CERTS && !WOLFCRYPT_ONLY) defined or built with --enable-opensslextra and the application is specifically making calls to the X509_verify_cert function. |
| In wolfSSL versions 5.7.2 through 5.9.2 there is a client-side implementation flaw in RFC 6961, multiple OCSP response stapling, which can lead to certificate forgery. When a wolfSSL client enables OCSP stapling with the HAVE_CERTIFICATE_STATUS_REQUEST_V2 feature and calls wolfSSL_UseOCSPStaplingV2(ssl, WOLFSSL_CSR2_OCSP_MULTI, options), the client accepts any certificate in the peer's chain as a certificate authority without verifying that the certificate is actually authorized to act as one. This means that an attacker who possesses any certificate that chains to a CA trusted by the client (along with its private key) can forge certificates for arbitrary identities that will be accepted as valid by the client. The end entity certificate of the server is stored in the persistent trust store, affecting subsequent connections that reuse the context even when OCSP multi usage is not employed. Found by internal wolfSSL testing. |
| A certificate with no dNSName SAN but another SAN type present (e.g. registeredID or iPAddress) bypassed the Subject CN dNSName name-constraint check. The CN-as-DNS fallback was gated on cert->subjectCN != NULL && cert->altNames == NULL && !cert->isCA instead of "no dNSName SAN", so an out-of-scope CN was accepted. This incomplete fix from CVE-2026-6731, leading to the name-constraint check issue, was introduced in wolfSSL version 5.9.2. |
| http4k's Digest authentication module (org.http4k:http4k-security-digest) before versions 6.48.0.0, 5.42.0.0 and 4.51.0.0 defaults the nonceVerifier parameter of ServerFilters.DigestAuth and DigestAuthProvider to { true }, so every nonce is accepted regardless of its value, age, or prior use. Applications relying on this default have no replay protection on Digest authentication: an attacker who can capture a valid 'Authorization: Digest' response (for example by observing network traffic or reading logs) can replay it indefinitely against the same protected resource. |
| Nodemailer versions 5.0.0 through 10.0.1 use a process-global DNS cache that is keyed only by the DNS host, while each cache entry also stores the caller-specific TLS servername. When two direct TLS/SMTPS transports (secure: true) resolve the same non-IP host with different tls.servername values, the first transport's servername is returned on the cache hit and overwrites the second transport's explicitly configured value, so Nodemailer sends the wrong SNI value and validates the peer certificate against the wrong identity. In multi-tenant services or SNI-routed SMTP gateways, an attacker who can prime the cache can cause a victim transport to connect to the attacker's TLS virtual host and accept the attacker's certificate even with rejectUnauthorized: true, disclosing the victim's SMTP credentials. Fixed in 10.0.2. |
| Adobe Connect is affected by an Improper Certificate Validation vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue does not require user interaction. |
| Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, when Zammad checks the digital signature on an incoming S/MIME-signed email, it does not verify that the signing certificate is genuinely trusted, it only checks whether a certificate with a matching name is already stored in the system. An attacker can create their own certificate using the name of a real, previously trusted sender and use it to send a forged email. Zammad will display that email with the same "validly signed" indicator as a genuine message from the real sender, even though the attacker never had access to that sender's actual certificate or private key. This issue is fixed in version 7.1.2. |
| PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certificate carrying a non-matching DNS SAN was still accepted when its CN matched the requested peer_name. A certificate trusted by the client for one name can therefore be used to impersonate another. |
| OpenClaw for iOS versions >= 2026.7.1 and < 2026.8.11 do not enforce saved Gateway TLS pins in the Control UI. While native connections enforced the saved Gateway fingerprint, the authenticated Terminal and session Dashboard WebViews omitted it. If a user had accepted a Gateway fingerprint, an attacker able to redirect the same host and port and present a different certificate that is accepted by iOS system trust can serve a replacement Control UI page; opening the Terminal or a session Dashboard then allows that page to read the injected Gateway token or password. The stolen credential can grant operator access, including reading sensitive Gateway state and invoking host-capable tools. This issue is fixed in 2026.8.11. |
| Zoraxy versions 3.2.3 through 3.3.4 fail to properly parse IPv6 addresses in the RemoteAddr field when setting forwarded headers. Unauthenticated attackers connecting over IPv6 can supply arbitrary X-Forwarded-For values to spoof their source IP and bypass authorization provider IP-based access controls. |
| A flaw was found in EAP's Elytron. An EAP application whose security domain is backed by an Elytron token-realm with oauth2-introspection would allow parameter substitution due to missing URL encoding. |
| Authentication bypass by spoofing in Microsoft Dataverse allows an unauthorized attacker to elevate privileges over a network. |
| Authentication bypass by spoofing in Microsoft Fabric allows an unauthorized attacker to elevate privileges over a network. |
