| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. (The affected metadata-parser header states "Some portions generated by Copilot (Sonnet 4.6)" — an AI-generated parser with an unchecked on-flash count.) |
| `_nx_icmpv6_validate_options()` scans the option area with `while (length > 2)` (`common/src/nx_icmpv6_validate_options.c:79`). An area whose size leaves a one- or two-byte residue exits the loop with that tail unexamined; the residue is not negative, so the function returns `NX_SUCCESS`. Its zero-length rejection never sees those bytes.
Every consumer then re-walks the same area, reading a two-byte option header at the residue and subtracting `nx_icmpv6_option_length << 3` with no zero check and no remaining-length check. Three outcomes follow, selected by bytes the attacker controls.
**Zero length byte.** The walker subtracts zero and advances zero. All four handlers loop forever — `_nx_icmpv6_process_ra` (`nx_icmpv6_process_ra.c:245, :528`), `_nx_icmpv6_process_ns` (`:251, :329`), `_nx_icmpv6_process_na` (`:147, :156`) and `_nx_icmpv6_process_redirect` (`:247, :350`). The walk runs in the IP thread, which is the highest-priority thread and does not yield inside the loop, so the system stops until a watchdog reset and the frame can be replayed after each one.
**Non-zero length byte on a short residue.** The three unsigned counters underflow — `2 - 8` becomes `0xFFFFFFFA` — and the walk continues past the packet buffer, reading until it faults or meets a zero length byte and freezes. The Router Advertisement counter is signed and exits cleanly in this case.
**One-byte residue.** The walker reads a two-byte option header, over-reading one byte.
During a runaway walk, stray bytes parsing as a link-layer address option are copied into the neighbor cache (`nx_icmpv6_process_ns.c:280, :293`) and subsequently used as the destination MAC for frames to that neighbour, placing off-packet memory on the link. Confirmed by inspection, not reproduced. |
| Two issues in the ThreadX loadable-module loader, reached when a device loads an attacker-controlled module object via `_txm_module_manager_memory_load` / `_txm_module_manager_in_place_load` — APIs that take ONLY a base pointer, no image length, so every size/offset field in `TXM_MODULE_PREAMBLE` is fully attacker-trusted: (1) a heap OOB **read** (`code_size` trusted as the source-image length in the code-copy loop), and (2) a control-flow-integrity / defense-in-depth gap (module entry/start/callback/stop pointers computed as `code_start + preamble_offset` with only a `!= 0` check, and the preamble `checksum` never verified). No controlled OOB write was found (honest — the copy destination is overflow-guarded). |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| IEEE 802.11 protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| Improper neutralization of special elements in data query logic in the GridFS component of the MongoDB Go Driver can cause a caller-supplied structured file identifier to be interpreted as a query condition rather than as a literal identifier. An authenticated user who can influence the identifier passed by an affected application may cause all GridFS file chunks in the affected bucket to be removed, rendering stored file content unreadable. |
| A flaw was found in Keycloak. A remote, unauthenticated attacker can send a specially crafted XML input to the Security Assertion Markup Language (SAML) endpoint. This malicious input can cause high CPU usage and worker thread starvation, leading to a Denial of Service (DoS) where the server becomes unavailable. |
| A flaw was found in Keycloak. Keycloak's Security Assertion Markup Language (SAML) broker endpoint does not properly validate encrypted assertions when the overall SAML response is not signed. An attacker with a valid signed SAML assertion can exploit this by crafting a malicious SAML response. This allows the attacker to inject an encrypted assertion for an arbitrary principal, leading to unauthorized access and potential information disclosure. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
| Net::IDN::Punycode::PP versions before 2.590 for Perl decode a truncated label to a name containing a character it never encoded in decode_punycode.
The pure-Perl decoder reads one digit at a time with four-argument substr and tests the result with defined to detect the end of the input. substr on an exhausted string returns the empty string rather than undef, so decoding continues past the end. The empty string converts to a digit value below the range, reducing the accumulator, and the decoder derives one extra code point and its position from it. The result is deterministic. The XS backend rejects the same label.
Net::IDN::Punycode uses this backend wherever the XS does not build.
The two backends disagree about what such a label means, so a sender can pick a label that one installation resolves to a name and another rejects. |
| Net::IDN::Punycode versions before 2.590 for Perl hang, crash or return a wrong label via unvalidated malformed UTF-8 in encode_punycode.
Neither backend checks that its input is well-formed UTF-8, so a string with the UTF-8 flag set over malformed bytes, as the :utf8 PerlIO layer produces from any malformed input, reaches the encoder unchecked. On perl 5.32 and later the XS backend reports a malformed sequence with a length of `(STRLEN)-1`, so the scan steps back one byte instead of forward and never ends. On earlier perls the XS returns a valid label for a different name. The pure-Perl backend runs a regex over the flagged string. Depending on the bytes, it aborts with SIGBUS on perl 5.28 and later, dies with a panic, or returns a wrong label.
The documented conversion functions match the label against Unicode properties first and that match dies on such a string, so only a direct call to encode_punycode reaches the defect. The decoder is not affected.
A direct caller encoding attacker-supplied bytes hangs, crashes or gets a label for a name the input never held. |
| A vulnerability was determined in Barco ClickShare CX-20 Gen2 up to 02.26.00.0007. Affected by this issue is some unknown functionality of the file /wallpaper of the component Wallpaper Upload. This manipulation of the argument wallpaper causes improper validation of syntactic correctness of input. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.12.0 until 1.20.0, ResolveConfig reads inherited Symbol.toStringTag, append, and getHeaders properties while resolving FormData headers. A separate same-process prototype-pollution flaw supplies an array or non-plain class instance whose inherited properties make it appear FormData-like; plain objects are blocked. The inherited getHeaders function can return attacker-controlled headers that resolveConfig merges into a fetch adapter request. Attacker-controlled headers can alter authorization, cache, metadata-service, or application-specific request behavior. This issue is fixed in version 1.20.0. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.1 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an authenticated user with Owner or Maintainer permissions could have silently disabled protected environment deployment approval requirements, allowing unapproved deployments to reach production, due to improper access control checks performed after the protected resource was modified. |
| `@bsv/wallet-toolbox` provides BRC-100 wallet signing and storage components, while `@bsv/wallet-toolbox-client` and `@bsv/wallet-toolbox-mobile` provide client-focused distributions for standard and mobile applications using wallet storage services. A vulnerability in these packages causes transactions created through a remote `StorageClient` to trust output locking scripts returned by the storage provider without verifying that they match the outputs requested by the caller. A malicious or compromised storage provider can substitute a recipient script or inject an additional output, causing the wallet to sign and broadcast a transaction that redirects funds while the application and user interface continue to display the intended recipient. Source and npm publication history indicate that stable versions `@bsv/wallet-toolbox` and `@bsv/wallet-toolbox-client` from 1.1.47 through 2.3.3, and `@bsv/wallet-toolbox-mobile` from its initial 1.3.21 release through 2.3.3, are affected. All three packages are patched in version 2.4.0. Applications unable to upgrade should avoid remote `StorageClient` providers, use local storage, or independently verify every transaction output’s locking script and value against the original request before signing |
| Nodemailer is a Node.js email-sending library. In versions >= 9.1.0 and < 10.0.9, the address parser (src/addressparser) mishandles addresses whose local-part is a quoted string and that are followed by RFC 5322 comments, allowing trailing comment-separated domain atoms to be retained in the normalized address. For example, the input "user"@example.com(x)evil.com is parsed to the address value '[email protected] evil.com', which contains additional attacker-controlled domain text separated by a literal space. This parsed value is used without further strict recipient validation when the message envelope is built (envelope.to in src/mime-node), so a malformed/ambiguous recipient address can be accepted and placed in the SMTP envelope. Whether this results in delivery to an unintended recipient on real SMTP servers has not been confirmed. The issue is a variant of the RFC 5322 comment parsing problem addressed in GHSA-cc9r-2j5m-2m83, affecting the separate quoted-local-part code path. Version 10.0.9 contains a fix. |
| vLLM versions 0.22.0 through 0.23.0 fail to validate stop_token_ids against vocabulary bounds in Rust HTTP and gRPC frontends, allowing out-of-vocabulary token IDs to reach MinTokensLogitsProcessor. Attackers can submit requests with min_tokens greater than zero and out-of-vocabulary stop_token_ids to trigger CUDA tensor indexing failures that leave EngineCore in a fatal state requiring service restart. |
| A flaw has been found in Trusted Domain Project OpenDMARC up to 1.4.2. Affected by this issue is some unknown functionality of the file policy.c of the component Domain Handler. Executing a manipulation can lead to improper validation of unsafe equivalence in input. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Contrast (Edgeless Systems) through 1.20.0 performs unanchored suffix matching when selecting per-registry configuration in the imagepuller. Config.registryFor strips a single trailing dot and then uses strings.HasSuffix(hostname, fqdn) without requiring a DNS label boundary, so a registry entry such as [registries."ghcr.io."] is also applied to any host whose name merely ends in that byte sequence, including attacker-registered domains such as evilghcr.io. When an image or layer is pulled from such a sibling domain, the imagepuller sends the configured Authorization header (basic auth, registry token, or identity token), trusts the configured custom CA bundle, follows the configured mirror, and honours insecure-skip-verify (disabling TLS verification) for that host. Image integrity is not affected, as image bytes remain pinned by digest in the policy and are validated after the pull. Configurations that use a leading dot (e.g., [registries.".example.registry"]) are unaffected. |
| A vulnerability has been found in Trusted Domain Project OpenDMARC up to 1.4.2. This affects the function opendmarc_policy_parse_dmarc in the library libopendmarc/opendmarc_policy.c. The manipulation of the argument fo/rf/ri/pct/sp/adkim/aspf/rua/ruf leads to handling of exceptional conditions. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
