Export limit exceeded: 20855 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390784 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90507 | 1 Vvbbnn00 | 1 Warp-clash-api | 2026-09-13 | 6.3 Medium |
| A vulnerability was identified in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. Affected is the function get_surge_subscription of the file services/subscription.py of the component Subscription Handler. Such manipulation of the argument key leads to improper access controls. The attack may be launched remotely. The exploit is publicly available and might be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-90506 | 1 Vvbbnn00 | 1 Warp-clash-api | 2026-09-13 | 5 Medium |
| A vulnerability was determined in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. This impacts an unknown function of the component Save Account Job. This manipulation causes race condition. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is said to be difficult. The exploit has been publicly disclosed and may be utilized. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-81003 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sockets - Fabric noise on the IQD fabric, where bogus replies are sent - killing established connections Third, all AF_IUCV sockets live in init_net, as iucv_sock_alloc() calls sk_alloc(&init_net, ...). But even frames arriving on netdev devices in a namespace can be delivered to an IUCV socket. So a process in an unprivileged user and network namespace holding only the CAP_NET_RAW capability valid within that namespace can send a raw ETH_P_AF_IUCV frame on its own lo device and have it matched against init_net sockets. Fix all three by skipping any socket whose hs_dev does not match the ingress device. A classic z/VM IUCV socket has hs_dev == NULL; the ingress dev is never NULL, so classic sockets are skipped automatically. An unbound HIPER socket also has hs_dev == NULL and is skipped. A bound HIPER socket is only reachable from the exact IQD device it was bound to. Because hs_dev is always a device in init_net (iucv_sock_bind() scans for_each_netdev_rcu(&init_net, ...) exclusively), a frame whose ingress device belongs to another namespace never matches any socket. Note that AF_IUCV over HiperSockets provides no per-connection authentication: no sequence numbers, no TLS, no nonce. The four name fields identifying a connection are exchanged in plaintext on the shared HiperSockets segment (VCHID). Any host on the same HiperSockets segment could spoof any frame type against an existing connection. That is a protocol-level property unchanged by this patch. The fix reduces the attack surface to peers present on the same HiperSockets segment. | ||||
| CVE-2026-90505 | 1 Vvbbnn00 | 1 Warp-clash-api | 2026-09-13 | 5 Medium |
| A vulnerability was found in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. This affects the function doUpdateLicenseKey. The manipulation results in race condition. The attack can be launched remotely. The attack requires a high level of complexity. The exploitability is reported as difficult. The exploit has been made public and could be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-90448 | 2026-09-13 | N/A | ||
| A deployment mode intended to expose only read access to stored data proxies a set of application programming interface routes without restricting which request methods are allowed. One such route accepts a request that creates or overwrites a stored record, including an attacker-chosen identifier, using the application's own elevated backend credentials. This allows an authenticated user on a deployment intended to be read-only to forge or overwrite stored records that should not be modifiable in that deployment mode. | ||||
| CVE-2026-90504 | 1 Vvbbnn00 | 1 Warp-clash-api | 2026-09-13 | 7.3 High |
| A vulnerability has been found in vvbbnn00 WARP-Clash-API up to c7bf2360073959861219b422e51ae86411051b46. The impacted element is the function authorized. The manipulation of the argument SECRET_KEY leads to missing authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2026-81005 | 1 Linux | 1 Linux Kernel | 2026-09-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this failed-registration rollback path. Therefore, the asynchronous redo_bmc_reg work item can still retry BMC device-id probing after the lower driver has already cleared its SI state machine data. In the observed case, that retry path reached start_next_msg(), which passed the NULL smi_info->si_sm pointer to the selected KCS state machine handler: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 Workqueue: events redo_bmc_reg [ipmi_msghandler] RIP: start_kcs_transaction+0x2c/0x190 [ipmi_si] Call Trace: start_next_msg+0x50/0x80 [ipmi_si] check_start_timer_thread.part.9+0x3b/0x50 [ipmi_si] sender+0x69/0x80 [ipmi_si] i_ipmi_request+0x2ac/0x9d0 [ipmi_msghandler] __get_device_id.isra.29+0xaa/0x180 [ipmi_msghandler] __bmc_get_device_id+0xef/0x950 [ipmi_msghandler] redo_bmc_reg+0x52/0x60 [ipmi_msghandler] process_one_work+0x1a7/0x360 Set intf->in_shutdown on the out_err_started path before invoking the lower driver's shutdown callback. This prevents later redo_bmc_reg retries from using an interface whose lower driver state has been cleaned up, and applies the same shutdown state to other IPMI interfaces as well. | ||||
| CVE-2026-90503 | 1 Chengdu Qilu Technology | 1 Ludashi | 2026-09-13 | 2.3 Low |
| A flaw has been found in Chengdu Qilu Technology Ludashi 6.1026.4715.714. The affected element is the function sub_11008 in the library ComputerZ_x64.sys. Executing a manipulation of the argument PhysicalAddress can lead to information disclosure. The attack needs to be launched locally. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-89448 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu(). | ||||
| CVE-2026-89562 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumulates the lower device's hardware header length into dev->hard_header_len whenever header_ops is set. This is incorrect for both users of header_ops. ip6gretap and ip6erspan have a fixed Ethernet hardware header length. For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header, the optional FOU or GUE header, and the outer IPv6 header. The lower device header is headroom needed later, not part of the tunnel device's hardware header. Keep the lower device header in needed_headroom. Set hard_header_len to the tunnel header length only for ARPHRD_IP6GRE devices with header_ops, and leave the fixed Ethernet header length unchanged for tap and erspan devices. | ||||
| CVE-2026-90460 | 1 Openstack | 1 Keystone | 2026-09-13 | N/A |
| An issue was discovered in OpenStack Keystone before 29.0.3. Tokens obtained via delegated authentication methods (EC2 credentials, application credentials, OAuth1 access tokens, and trusts) are not blocked from creating, modifying, or deleting credentials via the /v3/credentials API. EC2-derived tokens can additionally read credential blobs, exposing TOTP MFA seeds and other secrets. Also, PATCH /v3/credentials does not validate the requested post-update project_id, allowing any delegated token to move a credential to an unauthorized project. All Keystone deployments using delegated authentication are affected. | ||||
| CVE-2026-90445 | 2026-09-13 | N/A | ||
| An interface that accepts file uploads from authenticated users extracts the contents of uploaded archives without validating that extracted file paths remain within the intended destination directory. This allows an authenticated attacker to craft an archive whose entries traverse outside the destination directory, causing the extraction process to write files to arbitrary locations with the privileges of that process. This could allow an attacker to inject fabricated records into the system's stored data or tamper with application configuration. | ||||
| CVE-2026-90457 | 2026-09-13 | N/A | ||
| The administrative password is hashed using a comparatively weak, fast algorithm for the credential store backing one authentication path, and the file containing that hash is written with permissions allowing it to be read by any local user. This is inconsistent with a separate, stronger hashing algorithm used for the same password on another authentication path. A party able to read this file, including a local user or a party with access to a configuration backup, could feasibly recover the underlying password through offline computation, compromising the administrative credential across every path that accepts it. | ||||
| CVE-2026-16482 | 2 Rtcamp, Wordpress | 2 Rtmedia For Wordpress, Buddypress And Bbpress, Wordpress | 2026-09-13 | 7.5 High |
| The rtMedia for WordPress, BuddyPress and bbPress plugin for WordPress is vulnerable to time-based blind SQL Injection via the 'compare' parameter in all versions up to, and including, 4.7.11 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This is exploitable on any public page containing an rtMedia shortcode (e.g., [rtmedia_gallery]) when the rtmedia_shortcode GET parameter is set, because RTMediaQuery::query() merges $_REQUEST into the internal query while only validating top-level array keys, allowing the nested 'compare' subvalue to reach the vulnerable sink without authentication. | ||||
| CVE-2026-90474 | 1 Samanhappy | 1 Mcphub | 2026-09-13 | 6.8 Medium |
| MCPHub before 1.0.32 contains an authentication bypass vulnerability in its embedded OAuth 2.0 authorization server where client authentication is disabled by default and PKCE enforcement is optional. Attackers who obtain an authorization code through interception can redeem it for access tokens without providing a client secret or PKCE verifier, gaining access to victim accounts and their privileges. | ||||
| CVE-2026-90502 | 1 Stilleshan | 1 Serverstatus | 2026-09-13 | 3.5 Low |
| A vulnerability was detected in stilleshan ServerStatus 1.0/2.0. Impacted is an unknown function of the file server/src/main.cpp of the component Stats Generation. Performing a manipulation of the argument custom results in cross site scripting. It is possible to initiate the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-90443 | 2026-09-13 | N/A | ||
| A web interface reflects a portion of the request URL into a script context and a hyperlink attribute without adequate encoding, and does not require authentication to reach. This allows an unauthenticated network attacker to craft a link that, when visited by a user, executes arbitrary script in the context of the affected application and can redirect the user's browser to an arbitrary external site. Successful exploitation could allow an attacker to act with the compromised user's session privileges within the application. | ||||
| CVE-2026-90444 | 2026-09-13 | N/A | ||
| A file-transfer interface that requires valid credentials accepts attacker-controlled filenames without restricting shell metacharacters. An automated process later constructs and runs a system command using the uploaded file's name, allowing an authenticated attacker to embed and execute arbitrary operating system commands with the privileges of that process. This allows an attacker to read and modify ingested log data, and could provide a foothold for further movement within the internal network. | ||||
| CVE-2026-30754 | 1 Ffmpeg | 1 Ffmpeg | 2026-09-13 | 8.8 High |
| A memory corruption vulnerability exists in FFmpeg before 8.1. The RTP encoding process. In the nal_send function in libavformat/rtpenc_h264_hevc.c, a negative size parameter (size=-3) is passed to memcpy when transmitting H.264/HEVC streams via RTP using a crafted input file. This was detected using AddressSanitizer. | ||||
| CVE-2026-90501 | 1 Lenve | 1 Vhr | 2026-09-13 | 6.3 Medium |
| A security vulnerability has been detected in lenve vhr 1.0-SNAPSHOT. This issue affects the function HrInfoController.updateHr of the file HrMapper.xml. Such manipulation of the argument Password leads to improper privilege management. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||