| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition
In atmci_probe, &host->bh_work is bound with atmci_work_func, and
atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all
queue this work on system_bh_wq.
If we remove the module, atmci_remove makes cleanup and the memory
allocated for host with devm_kzalloc() is released after the remove
callback returns, while the work mentioned above may still be pending
or running. The sequence of operations that may lead to a UAF bug is
as follows:
CPU0 CPU1
| atmci_interrupt
| queue_work(system_bh_wq,
| &host->bh_work)
atmci_remove |
atmci_cleanup_slot(...) |
atmci_writel(host, ATMCI_IDR, ~0UL) |
timer_delete_sync(&host->timer) |
dma_release_channel(host->dma.chan) |
free_irq(platform_get_irq(pdev, 0), host) |
| atmci_work_func
| // use host
// devm resources released after |
// remove returns, host is freed |
| // use host (use-after-free)
Fix it by canceling the work after all the sources that can schedule
it (IRQ handler, timeout timer and DMA completion callback) have been
stopped, and before proceeding with the remaining cleanup in
atmci_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen
Whenever fq_codel drops packets during peek, it calls
qdisc_tree_reduce_backlog. An issue arises because it calls
qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops
to zero, but peek returns an skb, the parent's qlen_notify callback will be
executed even though fq_codel still has 1 packet on the queue and, thus,
will mistakenly deactivate the parent's class causing issues like a recent
report [1] and a wild memory access in qfq:
[ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI
[ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127]
[ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full)
[ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq
[ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216
[ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000
[ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000
[ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024
[ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000
[ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578
[ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000
[ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0
[ 29.376103][ T360] PKRU: 55555554
[ 29.376258][ T360] Call Trace:
[ 29.376401][ T360] <TASK>
...
[ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq
[ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057)
[ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096)
[ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556)
Fix this by only calling qdisc_tree_reduce_backlog in peek after the
qlen is restored.
[1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Take dma_resv lock before dma_buf_unpin() in release path
dma_buf_unpin() requires the caller to hold the exporter's dma_resv
lock:
void dma_buf_unpin(struct dma_buf_attachment *attach)
{
...
dma_resv_assert_held(dmabuf->resv);
...
}
iopt_release_pages() calls dma_buf_unpin() without taking that lock,
so every iommufd_ioas_destroy()/iommufd_ioas_unmap() that releases
the last reference on a DMABUF-backed iopt_pages triggers a WARN.
This was hit while running tools/testing/selftests/iommu/iommufd:
WARNING: drivers/dma-buf/dma-buf.c:1137 at dma_buf_unpin+0x62/0x70
RIP: 0010:dma_buf_unpin+0x62/0x70
Call Trace:
<TASK>
dma_buf_unpin+0x62/0x70
iopt_release_pages+0xe4/0x190
iopt_unmap_iova_range+0x1c7/0x290
iopt_unmap_all+0x1a/0x30
iommufd_ioas_destroy+0x1d/0x50
iommufd_fops_release+0x93/0x150
__fput+0xfc/0x2c0
__x64_sys_close+0x3d/0x80
do_syscall_64+0x65/0x180
</TASK>
Take the dma_resv lock around dma_buf_unpin() in iopt_release_pages(),
matching the iopt_map_dmabuf() convention. dma_buf_detach() acquires the
reservation lock internally, so it must remain outside the locked region. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix OOB read from short trigger BA firmware response
The firmware response length is only checked against sizeof(*rsp) (20
bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read
at buf + 20 without verifying the response contains it. This causes an
out-of-bounds read of stale heap data, corrupting the BA session state.
Add validation that the response includes the candidate data. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: revert ct extension genid infrastructure
This infrastructure is not used anymore after moving ct timeout and
helper to use datapath refcount to track object use.
Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension
genid count") this patch disables all ct extensions (leading to NULL)
for unconfirmed conntracks, when this is only targeted at ct helper and
ct timeout. There is also codebase that dereferences the ct extension
without checking for NULL which could lead to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
[BUG]
Unlinking a refcounted file whose refcount tree has leaf blocks
triggers a fortify panic due to an out-of-bounds write.
[CAUSE]
When the last leaf block is removed from a refcount tree,
ocfs2_remove_refcount_extent() converts the root back to leaf mode
with a bulk memset on &rb->rf_records. rf_records sits in an anonymous
union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count,
and is 0 for a single-level tree. With rl_count equal to 0, the memset
writes past the 16-byte declared size of rf_records, which the fortify
checker catches.
[FIX]
Replace the bulk memset on &rb->rf_records with a correctly-bounded
memset on rl_recs[] alone, after setting rl_count to the correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: don't BUG_ON an invalid journal dinode
[BUG]
A fuzzed OCFS2 image can corrupt the current slot journal dinode while
mount is still in progress. The mount path first reports the invalid
journal block and then crashes in shutdown:
kernel BUG at fs/ocfs2/journal.c:1034!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034
Call Trace:
ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116
ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline]
ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083
get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698
get_tree_bdev+0x24/0x40 fs/super.c:1721
ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
[CAUSE]
ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no
longer contained a valid dinode, because the startup and shutdown paths
already handled that failure. Commit 10995aa2451a
("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed
the check to a BUG_ON() under the assumption that the journal dinode had
already been validated. That turns an unexpected invalid journal dinode
during mount teardown into a kernel crash instead of a normal mount
failure.
[FIX]
Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the
invariant warning for debugging, but restores the original behavior of
failing startup or shutdown cleanly instead of panicking the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix warning in poll cq direct mode
CQs allocated by ib_alloc_cq() always have a comp_handler. Though
in direct mode this handler is never expected to be called, it
is still called when the driver is reset, triggering the following
WARN_ONCE():
Call trace:
ib_cq_completion_direct+0x38/0x60
hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2]
hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2]
hclge_notify_roce_client+0x60/0xbc [hclge]
hclge_reset_rebuild+0x48/0x34c [hclge]
hclge_reset_subtask+0xcc/0xec [hclge]
hclge_reset_service_task+0x80/0x160 [hclge]
hclge_service_task+0x50/0x80 (hclge]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18 |
| An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write arbitrary files and conduct denial-of-service attacks in DSM. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| A reachable assertion vulnerability in the NUDM-UECM interface of Open5GS v2.7.6 allows attackers to cause a Denial of Service (DoS) via supplying a crafted DELETE request. |
| An issue in the ModifyAMFEventSubscriptionProcedure function (processor/event_exposure.go) of free5gc v4.1.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted PATCH request. |
| Out of bounds read in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| The Shared Files WordPress plugin before 1.7.67, shared-files-pro WordPress plugin before 1.7.70 do not perform a capability check in their file-upload handler, which is registered for unauthenticated users and protected only by a nonce that is output on public pages, so an unauthenticated visitor can upload files to a publicly accessible directory and read the server's absolute path from the response. Uploads are limited to WordPress's allowed MIME types, so executable PHP cannot be uploaded. |
| An integer overflow in the libswscale/utils.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted image file. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
