| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
The helper function _ip_cprb_helper() uses internal buffer memory for
building and processing CPRBs. After use this buffer was never
scrubbed which could lead to leaving for example clear key material in
memory which could be exposed via tricky reuse of this same memory.
Extend the _ip_cprb_helper() function with another parameter 'scrub'
used to steer scrubbing of this buffer. So now the caller has the
opportunity to decide if scrubbing is needed or not.
Extend the clear key to secure key token import process in function
cca_clr2cipherkey() to tell the helper function from above to scrub
the cprb buffer when the clear key value is part of the request data.
Add explicit scrubbing on return from function cca_clr2cipherkey() for
the random EXOR buffer and the cprb buffer.
Overall this cleans the internal used buffer in case of clear key
import to prevent sensitive data to get exposed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
There is a wrong upper limit check for the domain value when an EP11
CPRB is processed for sending to a crypto card. This check is only
active on custom device nodes but may lead to access heap memory
behind perms->adm when an administrative CPRB is sent.
Add correct limit (AP_DOMAINS = 256) checking to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix undersized format-check buffer
fmt_buffer_size in dasd_eckd_check_device_format() is declared as
int, even though one of the multiplicands, sizeof(struct eckd_count),
is a size_t. The expression
trkcount * rpt_max * sizeof(struct eckd_count)
is therefore correctly evaluated at 64-bit width, but the result is
silently truncated when it is stored back into the 32-bit
fmt_buffer_size variable. For a sufficiently large track range
(start_unit/stop_unit are caller-controlled) this truncation
yields a buffer size far smaller than the number of tracks actually
requested. kzalloc() then succeeds with an undersized allocation,
while the subsequent channel program build still operates on the
untruncated track count and writes past the end of that buffer.
Compute the buffer size with check_mul_overflow() and keep it in a
size_t, so that a value that no longer fits results in -EINVAL
instead of a silently truncated allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: handle missing status supplier
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: remove napi_synchronize() in igc_down()
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e067240379. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: add a separate bio_set for iomap_split_ioend
iomap_split_ioend can split bios that already come from
iomap_ioend_bioset and thus deadlock when the bioset is exhausted.
Add a separate bio_set to avoid this deadlock.
Christian Brauner <[email protected]> says:
Mark iomap_ioend_split_bioset static as it is only used in ioend.c,
fixing the sparse warning reported by the kernel test robot. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071). |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation.
Spring for Apache Kafka 4.1.0
Spring for Apache Kafka 4.0.0 - 4.0.6
Spring for Apache Kafka 3.0.0 - 3.3.16
Spring for Apache Kafka 2.9.0 - 2.9.14
Spring for Apache Kafka 2.8.12 and earlier |
| Redis contains a use-after-free vulnerability in the 'tlsProcessPendingData()' function, which handles the TLS pending-data list if Redis is configured with TLS support. A remote, unauthenticated attacker may be able to execute arbitrary commands with the privileges of the Redis server. Fixed in Redis 8.2.9, 8.4.6, 8.6.6, 8.8.2, and 8.10.1. |
| Dolibarr before 24.0.0 contains a SQL injection in its CSV and XLSX import wizard. The wizard reads its update keys with GETPOST('updatekeys', 'array') in htdocs/imports/import.php, which applies only the generic alphanohtml filter: that strips HTML but leaves SQL keywords, comment markers, parentheses, spaces and quotes intact. import_insert() in htdocs/core/modules/import/import_csv.modules.php then iterates the submitted values and builds a filter with $where[] = $key.' = '.$data[$key], having first applied preg_replace('/^.*\./i', '', $key), an alias strip that does nothing to a value containing no dot. The assembled string is executed through $this->db->query(). The injected SELECT resolves the row id that the import then assigns to $lastinsertid, which becomes the WHERE target of a subsequent UPDATE, so a UNION SELECT returning an attacker-chosen integer both exfiltrates arbitrary table content and redirects which row the import overwrites; for category link tables the raw filter array is spliced into that UPDATE directly. The interface offers a fixed list of legitimate column codes but the server never checks the submitted values against it. A user holding the import permission can exploit this. Release 23.0.4 does not carry the fix; the allow-list test was added in 24.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: enable the right set of ciphers
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Treat zero-length cert chain as query for blob lengths
When handling a PDH export, treat a zero-length userspace cert chain buffer
as a request to query the length of the relevant blobs. Failure to account
for the zero-length buffer trips a BUG_ON() when running with
CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the
ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation).
kernel BUG at arch/x86/mm/physaddr.c:28 !
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded
Tainted: G W 6.18.16-smp-DEV #1 NONE
Tainted: [W]=WARN
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28
RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293
RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600
RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010
RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000
R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000
FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308
[<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556
[<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline]
[<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline]
[<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
[<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline]
[<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98
[<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fd3158eac39
</TASK>
Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting
the physical address is just arithmetic, and the PSP errors out before
trying to write to the garbage address (which it must, otherwise querying
the blob lengths would clobber memory at pfn=0). |
| A vulnerability was detected in RooCodeInc Roo-Code up to 3.51.1. This vulnerability affects unknown code of the file src/integrations/claude-code/oauth.ts of the component OAuth Callback. The manipulation results in cleartext transmission of sensitive information. The attack may be performed from remote. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The exploit is now public and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. |
| The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nat: reject unsupported target families
xt_nat SNAT and DNAT target handlers assume IP-family conntrack state
is present and can dereference a NULL pointer when instantiated from an
unsupported family through nft_compat. A bridge-family compat rule can
therefore trigger a NULL-dereference in nf_nat_setup_info().
Reject non-IP families in xt_nat_checkentry() so unsupported targets
cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT
compat users and leave the runtime fast path unchanged.
[ The crash was fixed via
9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"),
so this patch is no longer critical.
Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra
family check is a good idea in any case. ] |
| In the Linux kernel, the following vulnerability has been resolved:
perf tools: Use perf_env__get_cpu_topology() in machine__resolve()
machine__resolve() accesses env->cpu[al->cpu].socket_id after checking
al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu
against env->nr_cpus_avail. Since al->cpu comes from the untrusted
perf.data sample, a crafted file with a large CPU index causes an
out-of-bounds heap read.
Use perf_env__get_cpu_topology() which validates both NULL and bounds.
Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t):
without this, values like 65536 silently truncate to 0, bypassing the
accessor's internal check and returning CPU 0's topology. |
| In the Linux kernel, the following vulnerability has been resolved:
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix u16 truncation of restart-area length check
ntfs_check_restart_area() validates that the $LogFile restart area and
its trailing log client record array fit within the system page size:
u16 ra_ofs, ra_len, ca_ofs;
...
ra_len = ca_ofs + le16_to_cpu(ra->log_clients) *
sizeof(struct log_client_record);
if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...)
return false;
ra_len is u16, but the right-hand side is computed in size_t
(sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients
come straight from the on-disk restart area. With an on-disk
log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and
storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64
gives ra_len 128), so the "fits in the page" check passes even though
the client array described by log_clients extends far beyond the page.
ntfs_check_log_client_array() then walks the array bounded only by the
on-disk log_clients count:
cr = ca + idx;
if (cr->prev_client != LOGFILE_NO_CLIENT) ...
For log_clients 410 it dereferences records up to ca + 409 * 160,
~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an
out-of-bounds read of attacker-controlled extent, reachable when a
crafted NTFS image is mounted (load_and_check_logfile() at mount time).
This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g
userspace driver but never in this revived classic driver.
Compute the restart-area length in a u32 so the existing bounds check
rejects an over-large client array instead of being defeated by the
truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded
from __le16 on-disk fields and every comparison already promotes to
int/size_t, so this changes no result and keeps the declaration uniform. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident attribute lists and harden the validator
A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list()
only on the non-resident path; ntfs_read_locked_inode() copies a *resident*
attribute list into ni->attr_list with a plain memcpy() and no validation
at all. Every subsequent walk of ni->attr_list --
ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and
ntfs_attrlist_need() -- then trusts the entries are well-formed and reads
attr_list_entry fixed-header fields
(lowest_vcn at offset 8, mft_reference at offset 16, and the name) with
bounds that assume validation already happened. A crafted resident
attribute list therefore reaches those walks unvalidated and can drive
out-of-bounds reads of the attribute-list buffer.
load_attribute_list() itself reads ale->name_offset (offset 7),
ale->mft_reference (offset 16) and the name length under only an
"al < al_start + size" bound, so its own validation loop can over-read the
fixed header of a truncated trailing entry by a few bytes.
Factor the per-entry validation into ntfs_attr_list_entry_is_valid(),
which requires each entry's fixed header (offsetof(struct
attr_list_entry, name)) to be in range before any field is dereferenced,
that ale->length is a multiple of 8 covering the fixed header plus the
name, and that the entry is in use and carries a live MFT reference.
ntfs_attr_list_is_valid() walks the buffer with it and checks the entries
tile it exactly. Use the list validator in load_attribute_list()
(replacing the open-coded loop, closing its own over-read) and on the
resident path in ntfs_read_locked_inode() (which previously skipped
validation entirely); patches 2/3 reuse the per-entry helper at the other
two attribute-list walks. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
